From: Frank.Li@oss.nxp.com
To: soc@kernel.org, arm@kernel.org
Cc: Frank.Li@nxp.com, kernel@pengutronix.de, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
krzysztof.kozlowski@oss.qualcomm.com, lech.perczak@gmail.com,
Max.Merchel@ew.tq-group.com, sherry.sun@nxp.com
Subject: ARM: dts: imx device tree updates for v7.3
Date: Wed, 29 Jul 2026 15:20:18 -0400 [thread overview]
Message-ID: <20260729192020.523281-1-Frank.Li@oss.nxp.com> (raw)
From: Frank.Li@nxp.com
The following changes since commit dc59e4fea9d83f03bad6bddf3fa2e52491777482:
Linux 7.2-rc1 (2026-06-28 12:01:31 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/frank.li/linux.git tags/imx-dt-7.3
for you to fetch changes up to 6db9b23f3c0ebda050a4d38fda2b59db146ca161:
ARM: dts: ls1021a-iot: rename display@0 to display0 (2026-07-24 16:43:00 -0400)
----------------------------------------------------------------
ARM: dts: imx device tree updates for v7.3
Cleanup CHECK_DTBS warnings:
- Remove undocumented properties (nand-ecc-*, clock-names, default-state)
- Rename display@0 to display0 (ls1021a-iot)
- Add led suffix to node names (ls1021a-moxa-uc-8410a)
- Replace spansion,s25fl164k with jedec,spi-nor (ls1021a-moxa-uc-8410a)
- Use ethernet-phy-ieee802.3-c22 compatible string (ls1021a-moxa-uc-8410a)
- Rename eim-cs1 node to eim-cs1-bus (imx53-ard)
- Add power-supply for LCD panel (ls1021a-twr)
- Add fsl,ls1021aqds-fpga compatible string (ls1021a-qds)
Fixes:
- Change #io-channel-cells to 1 for voltage divider (imx6dl-plym2m)
New features:
- Describe Bluetooth controller (imx7d-pico)
- Add power-supply to PCIe Root Port (imx6sx-sdb, imx6qdl-sabresd)
----------------------------------------------------------------
Frank Li (15):
dt-bindings: fsl,fpga-qixis: Add fsl,ls1021aqds-fpga compatible string
ARM: dts: ls1021a-qds: add compatible string "fsl,ls1021aqds-fpga" for on boards FPGA chip
dt-bindings: soc: imx: Add fsl,eim-bus
ARM: dts: imx53-ard: change node name eim-cs1 to eim-cs1-bus
ARM: dts: ls1021a-moxa-uc-8410a: add led suffix to fix CHECK_DTBS warnings
ARM: dts: ls1021a-twr: add power-supply for lcd panel
ARM: dts: ls1021a-moxa-uc-8410a: use compatible string ethernet-phy-ieee802.3-c22
ARM: dts: ls1021a-moxa-uc-8410a: replace spansion,s25fl164k with jedec,spi-nor
ARM: dts: ls1021a-moxa-uc-8410a: remove undocument property default-state of gpio-keys
ARM: dts: imx6dl-plym2m: change #io-channel-cells to 1 of voltage divider
ARM: dts: imx53-smd: remove undocument property clock-names of ovti,ov5642
ARM: dts: imx6ul-isiot: remove undocument property clock-names of fsl,sgtl5000
ARM: dts: imx6ull-engicam-microgea: remove nand-ecc-strength and nand-ecc-step-size
dt-bindings: display: imx: Add deprecated property display and display0
ARM: dts: ls1021a-iot: rename display@0 to display0
Krzysztof Kozlowski (1):
ARM: dts: nxp: ls: Correct indentation
Lech Perczak (1):
ARM: dts: imx7d-pico: describe Bluetooth controller
Max Merchel (2):
ARM: dts: imx6ul-tqma6ul: add nvmem-layout
ARM: dts: imx6qdl-tqma6: add nvmem-layout
Sherry Sun (2):
ARM: dts: imx6qdl-sabresd: Add power supply property to Root Port node
ARM: dts: imx6sx-sdb: Add power supply property to Root Port node
.../devicetree/bindings/board/fsl,fpga-qixis.yaml | 1 +
.../devicetree/bindings/bus/fsl,spba-bus.yaml | 4 ++-
.../bindings/display/fsl,ls1021a-dcu.yaml | 22 ++++++++++++++++
arch/arm/boot/dts/nxp/imx/imx53-ard.dts | 2 +-
arch/arm/boot/dts/nxp/imx/imx53-smd.dts | 1 -
arch/arm/boot/dts/nxp/imx/imx6dl-plym2m.dts | 4 +--
arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi | 2 ++
arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi | 10 ++++++++
arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi | 10 ++++++++
arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi | 2 ++
arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi | 1 -
.../boot/dts/nxp/imx/imx6ul-tqma6ul-common.dtsi | 10 ++++++++
.../boot/dts/nxp/imx/imx6ull-engicam-microgea.dtsi | 2 --
arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi | 23 +++++++++++++++++
arch/arm/boot/dts/nxp/ls/ls1021a-iot.dts | 4 +--
arch/arm/boot/dts/nxp/ls/ls1021a-moxa-uc-8410a.dts | 29 +++++++++++-----------
arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts | 4 +--
arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts | 3 ++-
18 files changed, 105 insertions(+), 29 deletions(-)
reply other threads:[~2026-07-29 19:20 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260729192020.523281-1-Frank.Li@oss.nxp.com \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@nxp.com \
--cc=Max.Merchel@ew.tq-group.com \
--cc=arm@kernel.org \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski@oss.qualcomm.com \
--cc=lech.perczak@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=sherry.sun@nxp.com \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox