From: Yureka Lilian <yureka@cyberchaos.dev>
To: "Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Sven Peter" <sven@kernel.org>, "Janne Grunau" <j@jannau.net>,
"Neal Gompa" <neal@gompa.dev>,
"Thomas Gleixner" <tglx@kernel.org>,
"Radu Rendec" <radu@rendec.net>,
"Hector Martin" <marcan@marcan.st>,
"Linus Walleij" <linusw@kernel.org>,
"Mark Kettenis" <kettenis@openbsd.org>,
"Andi Shyti" <andi.shyti@kernel.org>,
"Uwe Kleine-König" <ukleinek@kernel.org>,
"Sasha Finkelstein" <k@chaosmail.tech>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
asahi@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
linux-gpio@vger.kernel.org, linux-i2c@vger.kernel.org,
linux-pwm@vger.kernel.org, Yureka Lilian <yureka@cyberchaos.dev>,
Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Subject: [PATCH v2 0/9] Initial Apple Silicon M4 device trees and dt-bindings
Date: Sat, 01 Aug 2026 23:40:30 +0200 [thread overview]
Message-ID: <20260801-apple-m4-initial-devicetrees-v2-0-5cb07cc275da@cyberchaos.dev> (raw)
Hi,
This series adds initial device trees and dt-bindings for the Apple
Silicon devices using the M4 (t8132) SoC. For the most part it mirrors
Janne's M3 (t8122) bringup series as it was merged in the 7.2 cycle.
This series covers only a minimal amount of hardware, which is useful
as a basis for future developments. The hardware added here has remained
largely unchanged between the M3 and M4 generations.
Most of the changes for bringing these M4 devices into a bootable state
have been happening in the m1n1 bootloader, which, compared to the M3
generation, is no longer responsible for setting the configuration bits
(🐔-bits) of the CPU, since these are now set and locked by iBoot.
Additionally, SMP boot depends on patches to avoid WFI and WFIT
instructions, such as the idle=nop patches I sent out just before v1.
Even with those, SMP boot remains unreliable.
Since there are no actual driver changes, we'd generally prefer to merge
the dt-bindings changes through the apple-soc tree once Acked by the
respective maintainers.
There are two notable exceptions in this patch series, due to some
commits having already been applied to the respective subsystems' trees:
- "dt-bindings: watchdog: apple,wdt: Add t8132 compatible"[1] has already
been applied to the watchdog subsystem tree, and this patch series
will pass check_dtbs when applied on top of linux-next, which includes
that commit.
- "dt-bindings: pinctrl: apple,pinctrl: Add t8132 compatible" should be
applied through the pinctrl tree, since it depends on
"dt-bindings: pinctrl: apple,pinctrl: Add t6030 and t6031 compatibles"[2]
which has been applied in the pinctrl tree.
Link: https://lore.kernel.org/asahi/20260705-apple-m4-initial-devicetrees-v1-3-e5655ee56523@cyberchaos.dev/ [1]
Link: https://lore.kernel.org/all/20260709-apple-t603x-initial-devices-v1-7-55b305833123@jannau.net/ [2]
Signed-off-by: Yureka Lilian <yureka@cyberchaos.dev>
---
Changes in v2:
- Rebased on top of the M3 Pro/Max patch series, which was applied to
apple-soc earlier today.
- Fix several typos
- Explain merge strategy in cover letter
- Drop "dt-bindings: watchdog: apple,wdt: Add t8132 compatible", as it's
been applied in linux-watchdog.
- Reword dt-bindings commit messages to not reference the driver
- Add apple,always-on to ps_ans node, since powering it off causes reboots
- Disable ps_disp*_cpu nodes, since even reading their state causes
SErrors with recent firmware
- Fix inconsistency of name and reg of aic node
- Add M4 devices to the global description in Documentation/devicetree/bindings/arm/apple.yaml
- Link to v1: https://patch.msgid.link/20260705-apple-m4-initial-devicetrees-v1-0-e5655ee56523@cyberchaos.dev
---
Yureka Lilian (9):
dt-bindings: arm: cpus: Add Apple M4 CPU core compatibles
dt-bindings: interrupt-controller: apple,aic2: Add apple,t8132 compatible
dt-bindings: arm: apple: apple,pmgr: Add t8132 compatible
dt-bindings: power: apple,pmgr-pwrstate: Add t8132 compatible
dt-bindings: pinctrl: apple,pinctrl: Add t8132 compatible
dt-bindings: i2c: apple,i2c: Add t8132 compatible
dt-bindings: pwm: apple,s5l-fpwm: Add t8132 compatible
dt-bindings: arm: apple: Add M4 based devices
arm64: dts: apple: Add minimal t8132 (M4) device trees
Documentation/devicetree/bindings/arm/apple.yaml | 21 +
.../devicetree/bindings/arm/apple/apple,pmgr.yaml | 1 +
Documentation/devicetree/bindings/arm/cpus.yaml | 2 +
.../devicetree/bindings/i2c/apple,i2c.yaml | 1 +
.../bindings/interrupt-controller/apple,aic2.yaml | 1 +
.../devicetree/bindings/pinctrl/apple,pinctrl.yaml | 1 +
.../bindings/power/apple,pmgr-pwrstate.yaml | 1 +
.../devicetree/bindings/pwm/apple,s5l-fpwm.yaml | 1 +
arch/arm64/boot/dts/apple/Makefile | 6 +
arch/arm64/boot/dts/apple/t8132-j604.dts | 35 +
arch/arm64/boot/dts/apple/t8132-j623.dts | 18 +
arch/arm64/boot/dts/apple/t8132-j624.dts | 18 +
arch/arm64/boot/dts/apple/t8132-j713.dts | 35 +
arch/arm64/boot/dts/apple/t8132-j715.dts | 35 +
arch/arm64/boot/dts/apple/t8132-j773g.dts | 25 +
arch/arm64/boot/dts/apple/t8132-jxxx.dtsi | 48 +
arch/arm64/boot/dts/apple/t8132-pmgr.dtsi | 1130 ++++++++++++++++++++
arch/arm64/boot/dts/apple/t8132.dtsi | 447 ++++++++
18 files changed, 1826 insertions(+)
---
base-commit: 6e890bf6442553c7bf56867a91c2dbcc2c295900
change-id: 20260705-apple-m4-initial-devicetrees-f6ebb1c7a2cd
prerequisite-patch-id: 9cc940a660e81da8e030e383e26cd5a700fe2e80
prerequisite-patch-id: 1a60321f66e49041d1de2864f1678009a0356294
Best regards,
--
Yureka Lilian <yureka@cyberchaos.dev>
next reply other threads:[~2026-08-01 21:41 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-01 21:40 Yureka Lilian [this message]
2026-08-01 21:40 ` [PATCH v2 1/9] dt-bindings: arm: cpus: Add Apple M4 CPU core compatibles Yureka Lilian
2026-08-01 21:40 ` [PATCH v2 2/9] dt-bindings: interrupt-controller: apple,aic2: Add apple,t8132 compatible Yureka Lilian
2026-08-01 21:40 ` [PATCH v2 3/9] dt-bindings: arm: apple: apple,pmgr: Add t8132 compatible Yureka Lilian
2026-08-01 21:40 ` [PATCH v2 4/9] dt-bindings: power: apple,pmgr-pwrstate: " Yureka Lilian
2026-08-01 21:40 ` [PATCH v2 5/9] dt-bindings: pinctrl: apple,pinctrl: " Yureka Lilian
2026-08-01 21:40 ` [PATCH v2 6/9] dt-bindings: i2c: apple,i2c: " Yureka Lilian
2026-08-01 21:40 ` [PATCH v2 7/9] dt-bindings: pwm: apple,s5l-fpwm: " Yureka Lilian
2026-08-01 21:40 ` [PATCH v2 8/9] dt-bindings: arm: apple: Add M4 based devices Yureka Lilian
2026-08-01 21:40 ` [PATCH v2 9/9] arm64: dts: apple: Add minimal t8132 (M4) device trees Yureka Lilian
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260801-apple-m4-initial-devicetrees-v2-0-5cb07cc275da@cyberchaos.dev \
--to=yureka@cyberchaos.dev \
--cc=andi.shyti@kernel.org \
--cc=asahi@lists.linux.dev \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=j@jannau.net \
--cc=k@chaosmail.tech \
--cc=kettenis@openbsd.org \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@oss.qualcomm.com \
--cc=linusw@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=marcan@marcan.st \
--cc=neal@gompa.dev \
--cc=radu@rendec.net \
--cc=robh@kernel.org \
--cc=sven@kernel.org \
--cc=tglx@kernel.org \
--cc=ukleinek@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox