From: mdshahid03@gmail.com
To: Jonathan Cameron <jic23@kernel.org>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: "Joshua Crofts" <joshua.crofts@broadcom.com>,
"Broadcom internal kernel list"
<bcm-kernel-feedback-list@broadcom.com>,
"David Lechner" <dlechner@baylibre.com>,
linux-arm-kernel@lists.infradead.org, linux-iio@vger.kernel.org,
linux-kernel@vger.kernel.org, "Nuno Sá" <nuno.sa@analog.com>,
"Ray Jui" <rjui@broadcom.com>,
"Scott Branden" <sbranden@broadcom.com>,
"Mohammad Shahid" <mdshahid03@gmail.com>
Subject: [PATCH v4 3/3] iio: adc: bcm_iproc_adc: Convert probe error handling to dev_err_probe()
Date: Sat, 1 Aug 2026 14:39:53 +0530 [thread overview]
Message-ID: <20260801090953.61603-4-mdshahid03@gmail.com> (raw)
In-Reply-To: <20260801090953.61603-1-mdshahid03@gmail.com>
From: Mohammad Shahid <mdshahid03@gmail.com>
This simplifies the probe error handling by replacing open-coded
dev_err() and return sequences while preserving the existing
messages.
Signed-off-by: Mohammad Shahid <mdshahid03@gmail.com>
---
drivers/iio/adc/bcm_iproc_adc.c | 39 +++++++++++++++------------------
1 file changed, 18 insertions(+), 21 deletions(-)
diff --git a/drivers/iio/adc/bcm_iproc_adc.c b/drivers/iio/adc/bcm_iproc_adc.c
index 4acd9c3f089b..5fcd528eb88a 100644
--- a/drivers/iio/adc/bcm_iproc_adc.c
+++ b/drivers/iio/adc/bcm_iproc_adc.c
@@ -523,19 +523,16 @@ static int iproc_adc_probe(struct platform_device *pdev)
adc_priv->regmap = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
"adc-syscon");
- if (IS_ERR(adc_priv->regmap)) {
- dev_err(dev, "failed to get handle for tsc syscon\n");
- ret = PTR_ERR(adc_priv->regmap);
- return ret;
- }
+ if (IS_ERR(adc_priv->regmap))
+ return dev_err_probe(dev,
+ PTR_ERR(adc_priv->regmap),
+ "failed to get handle for tsc syscon\n");
adc_priv->adc_clk = devm_clk_get(dev, "tsc_clk");
- if (IS_ERR(adc_priv->adc_clk)) {
- dev_err(dev,
- "failed getting clock tsc_clk\n");
- ret = PTR_ERR(adc_priv->adc_clk);
- return ret;
- }
+ if (IS_ERR(adc_priv->adc_clk))
+ return dev_err_probe(dev,
+ PTR_ERR(adc_priv->adc_clk),
+ "failed getting clock tsc_clk\n");
adc_priv->irqno = platform_get_irq(pdev, 0);
if (adc_priv->irqno < 0)
@@ -543,10 +540,10 @@ static int iproc_adc_probe(struct platform_device *pdev)
ret = regmap_clear_bits(adc_priv->regmap, IPROC_REGCTL2,
IPROC_ADC_AUXIN_SCAN_ENA);
- if (ret) {
- dev_err(dev, "failed to write IPROC_REGCTL2 %d\n", ret);
- return ret;
- }
+ if (ret)
+ return dev_err_probe(dev,
+ ret,
+ "failed to write IPROC_REGCTL2\n");
ret = devm_request_threaded_irq(dev, adc_priv->irqno,
iproc_adc_interrupt_handler,
@@ -556,11 +553,10 @@ static int iproc_adc_probe(struct platform_device *pdev)
return ret;
ret = clk_prepare_enable(adc_priv->adc_clk);
- if (ret) {
- dev_err(dev,
- "clk_prepare_enable failed %d\n", ret);
- return ret;
- }
+ if (ret)
+ return dev_err_probe(dev,
+ ret,
+ "failed to enable clock\n");
ret = iproc_adc_enable(indio_dev);
if (ret)
@@ -574,7 +570,8 @@ static int iproc_adc_probe(struct platform_device *pdev)
ret = iio_device_register(indio_dev);
if (ret) {
- dev_err(dev, "iio_device_register failed:err %d\n", ret);
+ dev_err_probe(dev, ret,
+ "failed to register IIO device\n");
goto err_clk;
}
--
2.43.0
prev parent reply other threads:[~2026-08-01 9:10 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-01 9:09 [PATCH v4 0/3] iio: adc: bcm_iproc_adc: Simplify probe error handling mdshahid03
2026-08-01 9:09 ` [PATCH v4 1/3] iio: adc: bcm_iproc_adc: Remove redundant probe error messages mdshahid03
2026-08-01 9:09 ` [PATCH v4 2/3] iio: adc: bcm_iproc_adc: Introduce local device pointer mdshahid03
2026-08-01 9:09 ` mdshahid03 [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260801090953.61603-4-mdshahid03@gmail.com \
--to=mdshahid03@gmail.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=joshua.crofts@broadcom.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=rjui@broadcom.com \
--cc=sbranden@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox