[PATCH v2 1/1] arm64: dts: st: Add I/O sync to eth1 pinctrl in stm32mp25-pinctrl.dtsi

[Christophe Roullier <christophe.roullier@foss.st.com>]

On board stm32mp235f-dk, stm32mp257f-dk the propagation
delay between eth1 and the external PHY requires a compensation to
guarantee that no packet get lost in all the working conditions.

Add I/O synchronization properties in pinctrl on all the RGMII
data pins, activating re-sampling on both edges of the clock.

Co-developed-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
 arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
index 456ece7f8ebc..4fcfc4528c5e 100644
--- a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
@@ -95,6 +95,7 @@ pins1 {
 			bias-disable;
 			drive-push-pull;
 			slew-rate = <3>;
+			st,io-sync = "data on both edges";
 		};
 		pins2 {
 			pinmux = <STM32_PINMUX('H', 9, AF10)>, /* ETH_RGMII_CLK125 */
@@ -112,6 +113,7 @@ pins3 {
 				 <STM32_PINMUX('H', 13, AF10)>, /* ETH_RGMII_RXD3 */
 				 <STM32_PINMUX('A', 11, AF10)>; /* ETH_RGMII_RX_CTL */
 			bias-disable;
+			st,io-sync = "data on both edges";
 		};
 		pins4 {
 			pinmux = <STM32_PINMUX('A', 14, AF10)>; /* ETH_RGMII_RX_CLK */
-- 
2.43.0