Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Jiaxing Hu <gahing@gahingwoo.com>
To: tomeu@tomeuvizoso.net, heiko@sntech.de, robh@kernel.org,
	krzk+dt@kernel.org, conor+dt@kernel.org, joro@8bytes.org,
	will@kernel.org, robin.murphy@arm.com, ulfh@kernel.org,
	p.zabel@pengutronix.de, ogabbay@kernel.org,
	zhangqing@rock-chips.com
Cc: royalnet026@gmail.com, alchark@flipper.net,
	chaoyi.chen@rock-chips.com, dri-devel@lists.freedesktop.org,
	linux-rockchip@lists.infradead.org, iommu@lists.linux.dev,
	linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Jiaxing Hu <gahing@gahingwoo.com>
Subject: [RFC PATCH v5 v5 6/8] accel/rocket: add RK3576 NPU (RKNN) support
Date: Wed,  5 Aug 2026 18:38:24 +1200	[thread overview]
Message-ID: <20260805063826.95682-7-gahing@gahingwoo.com> (raw)
In-Reply-To: <20260805063826.95682-1-gahing@gahingwoo.com>

The RK3576 carries the same RKNN block as the RK3588, with two cores
instead of three and a few platform differences:

 - the CBUF (convolution buffer) has its own clock domain, so the core
   needs six clocks rather than four;
 - the BIU reset moved into the power domain, leaving one reset here;
 - the NPU spans two power domains, and a device with more than one is
   skipped by the driver-core single-domain auto-attach, so the list has
   to be attached explicitly;
 - the DPU completion interrupt is armed exactly as on RK3588 but never
   reaches the GIC. The completion is visible in INTERRUPT_RAW_STATUS,
   so sample that from an hrtimer rather than wait for an interrupt that
   does not come. The interrupt stays armed, so if it ever does arrive
   the normal handler finalises the job first.

Select all of that from of_device_id match data so the RK3588 path keeps
its existing counts and behaviour unchanged.

Signed-off-by: Jiaxing Hu <gahing@gahingwoo.com>
---
 drivers/accel/rocket/rocket_core.c   |  26 +++++-
 drivers/accel/rocket/rocket_core.h   |  20 ++++-
 drivers/accel/rocket/rocket_device.c |   4 +
 drivers/accel/rocket/rocket_drv.c    |  22 ++++-
 drivers/accel/rocket/rocket_job.c    | 121 ++++++++++++++++++++++++---
 5 files changed, 176 insertions(+), 17 deletions(-)

diff --git a/drivers/accel/rocket/rocket_core.c b/drivers/accel/rocket/rocket_core.c
index b3b2fa9ba..e08288c8c 100644
--- a/drivers/accel/rocket/rocket_core.c
+++ b/drivers/accel/rocket/rocket_core.c
@@ -8,6 +8,7 @@
 #include <linux/err.h>
 #include <linux/iommu.h>
 #include <linux/platform_device.h>
+#include <linux/pm_domain.h>
 #include <linux/pm_runtime.h>
 #include <linux/reset.h>
 
@@ -21,14 +22,22 @@ int rocket_core_init(struct rocket_core *core)
 	u32 version;
 	int err = 0;
 
+	/* RK3576 moves the BIU reset into its power domain and takes only srst_a. */
 	core->resets[0].id = "srst_a";
 	core->resets[1].id = "srst_h";
-	err = devm_reset_control_bulk_get_exclusive(&pdev->dev, ARRAY_SIZE(core->resets),
+	err = devm_reset_control_bulk_get_exclusive(&pdev->dev, core->soc->num_resets,
 						    core->resets);
 	if (err)
 		return dev_err_probe(dev, err, "failed to get resets for core %d\n", core->index);
 
-	err = devm_clk_bulk_get(dev, ARRAY_SIZE(core->clks), core->clks);
+	core->clks[0].id = "aclk";
+	core->clks[1].id = "hclk";
+	core->clks[2].id = "npu";
+	core->clks[3].id = "pclk";
+	/* RK3576 clocks the CBUF separately; the compute path stalls without these. */
+	core->clks[4].id = "aclk_cbuf";
+	core->clks[5].id = "hclk_cbuf";
+	err = devm_clk_bulk_get(dev, core->soc->num_clks, core->clks);
 	if (err)
 		return dev_err_probe(dev, err, "failed to get clocks for core %d\n", core->index);
 
@@ -65,6 +74,19 @@ int rocket_core_init(struct rocket_core *core)
 		return err;
 	}
 
+	/*
+	 * RK3576 spans two power domains, and a multi-domain device is skipped
+	 * by the driver-core single-domain auto-attach, so attach the list here.
+	 */
+	if (core->soc->multi_power_domain) {
+		struct dev_pm_domain_list *pd_list;
+
+		err = devm_pm_domain_attach_list(dev, NULL, &pd_list);
+		if (err < 0)
+			return dev_err_probe(dev, err,
+					     "failed to attach NPU power domains\n");
+	}
+
 	pm_runtime_use_autosuspend(dev);
 
 	/*
diff --git a/drivers/accel/rocket/rocket_core.h b/drivers/accel/rocket/rocket_core.h
index f6d738285..205ff070d 100644
--- a/drivers/accel/rocket/rocket_core.h
+++ b/drivers/accel/rocket/rocket_core.h
@@ -6,6 +6,7 @@
 
 #include <drm/gpu_scheduler.h>
 #include <linux/clk.h>
+#include <linux/hrtimer.h>
 #include <linux/io.h>
 #include <linux/mutex_types.h>
 #include <linux/reset.h>
@@ -27,16 +28,25 @@
 #define rocket_core_writel(core, reg, value) \
 	writel(value, (core)->core_iomem + (REG_CORE_##reg) - REG_CORE_S_STATUS)
 
+/* Per-SoC differences, selected by the of_device_id match data. */
+struct rocket_soc_data {
+	unsigned int num_clks;		/* clk_bulk count: 4 base, 6 with CBUF */
+	unsigned int num_resets;	/* reset_bulk count: 2 base, 1 on RK3576 */
+	bool multi_power_domain;	/* device spans more than one PM domain */
+	bool poll_completion;		/* completion IRQ never reaches the GIC */
+};
+
 struct rocket_core {
 	struct device *dev;
 	struct rocket_device *rdev;
+	const struct rocket_soc_data *soc;
 	unsigned int index;
 
 	int irq;
 	void __iomem *pc_iomem;
 	void __iomem *cna_iomem;
 	void __iomem *core_iomem;
-	struct clk_bulk_data clks[4];
+	struct clk_bulk_data clks[6];
 	struct reset_control_bulk_data resets[2];
 
 	struct iommu_group *iommu_group;
@@ -52,6 +62,14 @@ struct rocket_core {
 		atomic_t pending;
 	} reset;
 
+	struct hrtimer poll_timer;
+	struct work_struct poll_work;
+	atomic_t poll_active;
+	unsigned int poll_ticks;
+	unsigned int poll_seq;
+	unsigned int poll_work_seq;
+	bool poll_dying;
+
 	struct drm_gpu_scheduler sched;
 	u64 fence_context;
 	u64 emit_seqno;
diff --git a/drivers/accel/rocket/rocket_device.c b/drivers/accel/rocket/rocket_device.c
index 46e6ee1e7..bfb00f967 100644
--- a/drivers/accel/rocket/rocket_device.c
+++ b/drivers/accel/rocket/rocket_device.c
@@ -31,6 +31,10 @@ struct rocket_device *rocket_device_init(struct platform_device *pdev,
 		if (of_device_is_available(core_node))
 			num_cores++;
 
+	for_each_compatible_node(core_node, NULL, "rockchip,rk3576-rknn-core")
+		if (of_device_is_available(core_node))
+			num_cores++;
+
 	rdev->cores = devm_kcalloc(dev, num_cores, sizeof(*rdev->cores), GFP_KERNEL);
 	if (!rdev->cores)
 		return ERR_PTR(-ENOMEM);
diff --git a/drivers/accel/rocket/rocket_drv.c b/drivers/accel/rocket/rocket_drv.c
index 8bbbce594..7f7dfa374 100644
--- a/drivers/accel/rocket/rocket_drv.c
+++ b/drivers/accel/rocket/rocket_drv.c
@@ -176,6 +176,7 @@ static int rocket_probe(struct platform_device *pdev)
 
 	rdev->cores[core].rdev = rdev;
 	rdev->cores[core].dev = &pdev->dev;
+	rdev->cores[core].soc = of_device_get_match_data(&pdev->dev);
 	rdev->cores[core].index = core;
 
 	rdev->num_cores++;
@@ -213,8 +214,23 @@ static void rocket_remove(struct platform_device *pdev)
 	}
 }
 
+static const struct rocket_soc_data rk3588_soc_data = {
+	.num_clks = 4,
+	.num_resets = 2,
+	.multi_power_domain = false,
+	.poll_completion = false,
+};
+
+static const struct rocket_soc_data rk3576_soc_data = {
+	.num_clks = 6,
+	.num_resets = 1,
+	.multi_power_domain = true,
+	.poll_completion = true,
+};
+
 static const struct of_device_id dt_match[] = {
-	{ .compatible = "rockchip,rk3588-rknn-core" },
+	{ .compatible = "rockchip,rk3588-rknn-core", .data = &rk3588_soc_data },
+	{ .compatible = "rockchip,rk3576-rknn-core", .data = &rk3576_soc_data },
 	{}
 };
 MODULE_DEVICE_TABLE(of, dt_match);
@@ -240,7 +256,7 @@ static int rocket_device_runtime_resume(struct device *dev)
 	if (core < 0)
 		return -ENODEV;
 
-	err = clk_bulk_prepare_enable(ARRAY_SIZE(rdev->cores[core].clks), rdev->cores[core].clks);
+	err = clk_bulk_prepare_enable(rdev->cores[core].soc->num_clks, rdev->cores[core].clks);
 	if (err) {
 		dev_err(dev, "failed to enable (%d) clocks for core %d\n", err, core);
 		return err;
@@ -260,7 +276,7 @@ static int rocket_device_runtime_suspend(struct device *dev)
 	if (!rocket_job_is_idle(&rdev->cores[core]))
 		return -EBUSY;
 
-	clk_bulk_disable_unprepare(ARRAY_SIZE(rdev->cores[core].clks), rdev->cores[core].clks);
+	clk_bulk_disable_unprepare(rdev->cores[core].soc->num_clks, rdev->cores[core].clks);
 
 	return 0;
 }
diff --git a/drivers/accel/rocket/rocket_job.c b/drivers/accel/rocket/rocket_job.c
index bb77b6bf0..28845ac4e 100644
--- a/drivers/accel/rocket/rocket_job.c
+++ b/drivers/accel/rocket/rocket_job.c
@@ -7,6 +7,7 @@
 #include <drm/drm_file.h>
 #include <drm/drm_gem.h>
 #include <drm/rocket_accel.h>
+#include <linux/hrtimer.h>
 #include <linux/interrupt.h>
 #include <linux/overflow.h>
 #include <linux/iommu.h>
@@ -21,6 +22,15 @@
 
 #define JOB_TIMEOUT_MS 500
 
+/*
+ * RK3576 arms the same DPU completion as RK3588, but the interrupt never
+ * reaches the GIC. The completion itself is visible in INTERRUPT_RAW_STATUS,
+ * so sample that instead. The tick cap bounds jobs that never raise it at all,
+ * which is the same open problem as the wrong inference results.
+ */
+#define RK3576_POLL_INTERVAL_NS	1000000LL	/* 1 ms */
+#define RK3576_POLL_MAX_TICKS	8
+
 static struct rocket_job *
 to_rocket_job(struct drm_sched_job *sched_job)
 {
@@ -151,6 +161,14 @@ static void rocket_job_hw_submit(struct rocket_core *core, struct rocket_job *jo
 
 	rocket_pc_writel(core, OPERATION_ENABLE, PC_OPERATION_ENABLE_OP_EN(1));
 
+	if (core->soc->poll_completion) {
+		core->poll_ticks = 0;
+		core->poll_seq++;
+		atomic_set(&core->poll_active, 1);
+		hrtimer_start(&core->poll_timer, ns_to_ktime(RK3576_POLL_INTERVAL_NS),
+			      HRTIMER_MODE_REL);
+	}
+
 	dev_dbg(core->dev, "Submitted regcmd at 0x%llx to core %d", task->regcmd, core->index);
 }
 
@@ -341,25 +359,87 @@ static struct dma_fence *rocket_job_run(struct drm_sched_job *sched_job)
 	return ERR_PTR(ret);
 }
 
+static void rocket_job_handle_irq(struct rocket_core *core);
+
+static enum hrtimer_restart rocket_poll_timer_fn(struct hrtimer *timer)
+{
+	struct rocket_core *core = container_of(timer, struct rocket_core, poll_timer);
+	u32 raw;
+
+	if (!atomic_read(&core->poll_active))
+		return HRTIMER_NORESTART;
+
+	core->poll_work_seq = core->poll_seq;
+
+	raw = rocket_pc_readl(core, INTERRUPT_RAW_STATUS);
+	if ((raw & (PC_INTERRUPT_RAW_STATUS_DPU_0 | PC_INTERRUPT_RAW_STATUS_DPU_1)) ||
+	    ++core->poll_ticks >= RK3576_POLL_MAX_TICKS) {
+		atomic_set(&core->poll_active, 0);
+		schedule_work(&core->poll_work);
+		return HRTIMER_NORESTART;
+	}
+
+	hrtimer_forward_now(timer, ns_to_ktime(RK3576_POLL_INTERVAL_NS));
+	return HRTIMER_RESTART;
+}
+
+/* Start the job's next task, or retire it. Caller holds job_lock. */
+static void rocket_job_next_locked(struct rocket_core *core)
+{
+	lockdep_assert_held(&core->job_lock);
+
+	if (!core->in_flight_job)
+		return;
+
+	if (core->in_flight_job->next_task_idx < core->in_flight_job->task_count) {
+		rocket_job_hw_submit(core, core->in_flight_job);
+		return;
+	}
+
+	iommu_detach_group(NULL, iommu_group_get(core->dev));
+	dma_fence_signal(core->in_flight_job->done_fence);
+	pm_runtime_put_autosuspend(core->dev);
+	core->in_flight_job = NULL;
+}
+
+static void rocket_poll_work_fn(struct work_struct *work)
+{
+	struct rocket_core *core = container_of(work, struct rocket_core, poll_work);
+
+	pm_runtime_mark_last_busy(core->dev);
+
+	scoped_guard(mutex, &core->job_lock) {
+		/*
+		 * The interrupt can land while this work is queued, retire the job
+		 * and start the next task. poll_seq only moves under job_lock, in
+		 * hw_submit, so comparing it here says whether that happened. Doing
+		 * it outside the lock would leave the window open rather than close
+		 * it, and this work would then submit a task on top of a live one.
+		 */
+		if (READ_ONCE(core->poll_dying) || core->poll_work_seq != core->poll_seq)
+			return;
+
+		rocket_pc_writel(core, OPERATION_ENABLE, 0x0);
+		rocket_pc_writel(core, INTERRUPT_CLEAR, 0x1ffff);
+
+		rocket_job_next_locked(core);
+	}
+}
+
 static void rocket_job_handle_irq(struct rocket_core *core)
 {
+	if (core->soc->poll_completion) {
+		atomic_set(&core->poll_active, 0);
+		hrtimer_cancel(&core->poll_timer);
+	}
+
 	pm_runtime_mark_last_busy(core->dev);
 
 	rocket_pc_writel(core, OPERATION_ENABLE, 0x0);
 	rocket_pc_writel(core, INTERRUPT_CLEAR, 0x1ffff);
 
 	scoped_guard(mutex, &core->job_lock)
-		if (core->in_flight_job) {
-			if (core->in_flight_job->next_task_idx < core->in_flight_job->task_count) {
-				rocket_job_hw_submit(core, core->in_flight_job);
-				return;
-			}
-
-			iommu_detach_group(NULL, iommu_group_get(core->dev));
-			dma_fence_signal(core->in_flight_job->done_fence);
-			pm_runtime_put_autosuspend(core->dev);
-			core->in_flight_job = NULL;
-		}
+		rocket_job_next_locked(core);
 }
 
 static void
@@ -460,6 +540,10 @@ int rocket_job_init(struct rocket_core *core)
 	int ret;
 
 	INIT_WORK(&core->reset.work, rocket_reset_work);
+	INIT_WORK(&core->poll_work, rocket_poll_work_fn);
+	hrtimer_setup(&core->poll_timer, rocket_poll_timer_fn, CLOCK_MONOTONIC,
+		      HRTIMER_MODE_REL);
+	atomic_set(&core->poll_active, 0);
 	spin_lock_init(&core->fence_lock);
 	mutex_init(&core->job_lock);
 
@@ -501,8 +585,23 @@ int rocket_job_init(struct rocket_core *core)
 
 void rocket_job_fini(struct rocket_core *core)
 {
+	/*
+	 * Stop the poll from starting hardware work before tearing anything
+	 * down: it submits the next task, and drm_sched_fini() does not wait
+	 * for work already queued. Cancel after the scheduler is gone, so a
+	 * job running now cannot re-arm the timer behind the cancel.
+	 */
+	if (core->soc->poll_completion)
+		WRITE_ONCE(core->poll_dying, true);
+
 	drm_sched_fini(&core->sched);
 
+	if (core->soc->poll_completion) {
+		atomic_set(&core->poll_active, 0);
+		hrtimer_cancel(&core->poll_timer);
+		cancel_work_sync(&core->poll_work);
+	}
+
 	cancel_work_sync(&core->reset.work);
 	destroy_workqueue(core->reset.wq);
 }
-- 
2.43.0



  parent reply	other threads:[~2026-08-05  6:39 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-05  6:38 [RFC PATCH v5 0/8] accel/rocket: RK3576 NPU (RKNN) enablement Jiaxing Hu
2026-08-05  6:38 ` [RFC PATCH v5 v5 1/8] dt-bindings: npu: rockchip: add rockchip,rk3576-rknn-core Jiaxing Hu
2026-08-05  6:38 ` [RFC PATCH v5 v5 2/8] dt-bindings: power: rockchip: allow resets in a power domain node Jiaxing Hu
2026-08-05  6:38 ` [RFC PATCH v5 v5 3/8] dt-bindings: iommu: rockchip: allow the RK3576 NPU MMU clock set Jiaxing Hu
2026-08-05  6:38 ` [RFC PATCH v5 v5 4/8] pmdomain/rockchip: add optional per-domain power-on settle delay Jiaxing Hu
2026-08-05  6:38 ` [RFC PATCH v5 v5 5/8] pmdomain/rockchip: cycle optional power-domain resets on power-on Jiaxing Hu
2026-08-05 12:13   ` Philipp Zabel
2026-08-05  6:38 ` Jiaxing Hu [this message]
2026-08-05 10:34   ` [RFC PATCH v5 v5 6/8] accel/rocket: add RK3576 NPU (RKNN) support Igor Paunovic
2026-08-05 12:52   ` Diederik de Haas
2026-08-05 14:06     ` Igor Paunovic
2026-08-05 14:07       ` Igor Paunovic
2026-08-05 14:35         ` Igor Paunovic
2026-08-05  6:38 ` [RFC PATCH v5 v5 7/8] arm64: dts: rockchip: rk3576: add NPU (RKNN) nodes Jiaxing Hu
2026-08-05  6:38 ` [RFC PATCH v5 v5 8/8] arm64: dts: rockchip: rk3576-rock-4d: enable NPU Jiaxing Hu
2026-08-05  9:06 ` [RFC PATCH v5 0/8] accel/rocket: RK3576 NPU (RKNN) enablement Igor Paunovic

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260805063826.95682-7-gahing@gahingwoo.com \
    --to=gahing@gahingwoo.com \
    --cc=alchark@flipper.net \
    --cc=chaoyi.chen@rock-chips.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=heiko@sntech.de \
    --cc=iommu@lists.linux.dev \
    --cc=joro@8bytes.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=ogabbay@kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=robh@kernel.org \
    --cc=robin.murphy@arm.com \
    --cc=royalnet026@gmail.com \
    --cc=tomeu@tomeuvizoso.net \
    --cc=ulfh@kernel.org \
    --cc=will@kernel.org \
    --cc=zhangqing@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox