[PATCH v3 0/4] MMC pinmux configuration fixes

[Judith Mendez <jm@ti.com>]

This series fixes MMC pin input/output and pullup/pulldown settings
across AM62x, AM62Ax, and AM62Lx boards.

All patches have been tested on their appropriate SK & EVM boards.
BeaglePlay and Pocketbeagle boards have also been tested.

Changes since v3:
- Include Moteen's review tags
- Add changelogs & links
- Switch out io expander patch for the correct AM62Lx patch 4/4
- Fixup cover letter description

Link to v1:
https://lore.kernel.org/linux-devicetree/20260729195958.671147-1-jm@ti.com/
Link to v2:
https://lore.kernel.org/linux-devicetree/20260805004821.416613-1-jm@ti.com/

According to review on v2 of the patch series, I included
Fixes tags for all patches. For patch 3/4, blaming
the original commits that introduced the "bug" will cause bad
backport conflicts so I tried to blame superficially and only
fix the files as they are currently structed, LMK if this is not
good enough.

Judith Mendez (4):
  arm64: dts: ti: k3-am62a: Fix MMC0_CLK register address
  arm64: dts: ti: k3-am62a: Set MMC clock pins as OUTPUT
  arm64: dts: ti: k3-am62: Set MMC clock pins as OUTPUT
  arm64: dts: ti: k3-am62l-evm: Remove unnecessary internal pullups for
    MMC0

 arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts         | 2 +-
 arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts | 2 +-
 arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts   | 6 +++---
 arch/arm64/boot/dts/ti/k3-am625-sk-common.dtsi   | 2 +-
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts          | 5 ++---
 arch/arm64/boot/dts/ti/k3-am62l3-evm.dts         | 4 ++--
 arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi   | 2 +-
 7 files changed, 11 insertions(+), 12 deletions(-)

-- 
2.54.0