From: Rosen Penev <rosenp@gmail.com>
To: linux-sound@vger.kernel.org
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>,
Michal Simek <michal.simek@amd.com>,
Maruthi Srinivas Bayyavarapu
<maruthi.srinivas.bayyavarapu@xilinx.com>,
linux-arm-kernel@lists.infradead.org (moderated list:ARM/ZYNQ
ARCHITECTURE), linux-kernel@vger.kernel.org (open list)
Subject: [PATCH] ASoC: xilinx: formatter_pcm: pass aud_drv_data to irq handlers
Date: Thu, 6 Aug 2026 16:32:31 -0700 [thread overview]
Message-ID: <20260806233231.30631-1-rosenp@gmail.com> (raw)
The irq handlers take a struct device pointer and call
dev_get_drvdata() to obtain the driver data. However, the driver
data is only set at the end of probe, after devm_request_irq(),
so an interrupt taken in between causes the handlers to pass a
NULL pointer to readl() and crash.
Pass the private data directly as the devm_request_irq() argument
instead of the device pointer, matching what the handlers expect.
Fixes: 6f6c3c36f091 ("ASoC: xlnx: add pcm formatter platform driver")
Assisted-by: opencode:deepseek-v4-flash-free
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
sound/soc/xilinx/xlnx_formatter_pcm.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/sound/soc/xilinx/xlnx_formatter_pcm.c b/sound/soc/xilinx/xlnx_formatter_pcm.c
index 7eba3a0205f1..b50306b0fc06 100644
--- a/sound/soc/xilinx/xlnx_formatter_pcm.c
+++ b/sound/soc/xilinx/xlnx_formatter_pcm.c
@@ -280,8 +280,7 @@ static irqreturn_t xlnx_mm2s_irq_handler(int irq, void *arg)
{
u32 val;
void __iomem *reg;
- struct device *dev = arg;
- struct xlnx_pcm_drv_data *adata = dev_get_drvdata(dev);
+ struct xlnx_pcm_drv_data *adata = arg;
reg = adata->mmio + XLNX_MM2S_OFFSET + XLNX_AUD_STS;
val = readl(reg);
@@ -299,8 +298,7 @@ static irqreturn_t xlnx_s2mm_irq_handler(int irq, void *arg)
{
u32 val;
void __iomem *reg;
- struct device *dev = arg;
- struct xlnx_pcm_drv_data *adata = dev_get_drvdata(dev);
+ struct xlnx_pcm_drv_data *adata = arg;
reg = adata->mmio + XLNX_S2MM_OFFSET + XLNX_AUD_STS;
val = readl(reg);
@@ -636,7 +634,7 @@ static int xlnx_formatter_pcm_probe(struct platform_device *pdev)
}
ret = devm_request_irq(dev, aud_drv_data->mm2s_irq,
xlnx_mm2s_irq_handler, 0,
- "xlnx_formatter_pcm_mm2s_irq", dev);
+ "xlnx_formatter_pcm_mm2s_irq", aud_drv_data);
if (ret) {
dev_err(dev, "xlnx audio mm2s irq request failed\n");
goto clk_err;
@@ -663,7 +661,7 @@ static int xlnx_formatter_pcm_probe(struct platform_device *pdev)
ret = devm_request_irq(dev, aud_drv_data->s2mm_irq,
xlnx_s2mm_irq_handler, 0,
"xlnx_formatter_pcm_s2mm_irq",
- dev);
+ aud_drv_data);
if (ret) {
dev_err(dev, "xlnx audio s2mm irq request failed\n");
goto clk_err;
--
2.55.0
reply other threads:[~2026-08-06 23:32 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260806233231.30631-1-rosenp@gmail.com \
--to=rosenp@gmail.com \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=maruthi.srinivas.bayyavarapu@xilinx.com \
--cc=michal.simek@amd.com \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
--cc=vincenzo.frascino@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox