[PATCH v2 0/6] Add SRAM Nodes for VPU

[Brandon Brnich <b-brnich@ti.com>]

Hello All,

This series is responsible for adding the SRAM nodes for the Wave5 VPU 
to use. The first 2 patches are responsible for carving out the SRAM
pool from main_navss that the VPU will then reference in patches 3 and
4. The last 2 patches use the existing oc_sram pool already found in the
relevant device trees.

v2 properly updates the nodename in the first two patches to pass
dtbs_check. I have talked with Andrew offline and he has said I can keep
his reviewed-by on the first 4 patches based on v1[0].

Best,
Brandon

[0]: https://lore.kernel.org/all/7d8582bc-e88d-40a7-be39-57045fa4c010@ti.com/

Brandon Brnich (6):
  arm64: dts: ti: k3-j721s2-main: Add mmio-sram node to main_navss
  arm64: dts: ti: k3-j784s4-j742s2-main-common: Add mmio-sram node to
    main_navss
  arm64: dts: ti: k3-j721s2-main: Assign SRAM to VPU node
  arm64: dts: ti: k3-j784s4-j742s2-main-common: Assign SRAM to VPU nodes
  arm64: dts: ti: k3-am62a-main: Assign SRAM to VPU node
  arm64: dts: ti: k3-am62p-j722s-common-main: Assign SRAM to VPU node

 arch/arm64/boot/dts/ti/k3-am62a-main.dtsi              |  1 +
 arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi |  1 +
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi             |  9 +++++++++
 .../boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi      | 10 ++++++++++
 4 files changed, 21 insertions(+)

-- 
2.43.0