[PATCH v4 1/2] arm64: dts: ti: k3-am62l-main: Add DSS & DSI related nodes

[Swamil Jain <s-jain1@ti.com>]

From: Devarsh Thakkar <devarsht@ti.com>

Add DSS, DSI and DPHY nodes to add base display support on AM62L[1].
AM62L shares a single video port for DPI and DSI output.

[1]: https://www.ti.com/product/AM62L

Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Swamil Jain <s-jain1@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62l-main.dtsi | 60 +++++++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62l-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62l-main.dtsi
index 80615ca1e01a..a3199a2455c3 100644
--- a/arch/arm64/boot/dts/ti/k3-am62l-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62l-main.dtsi
@@ -544,6 +544,66 @@ elm0: ecc@25010000 {
 		status = "disabled";
 	};
 
+	dphy_tx0: phy@301c0000 {
+		compatible = "ti,j721e-dphy";
+		reg = <0x00 0x301c0000 0x00 0x1000>;
+		clocks = <&scmi_clk 348>, <&scmi_clk 343>;
+		clock-names = "psm", "pll_ref";
+		#phy-cells = <0>;
+		power-domains = <&scmi_pds 86>;
+		assigned-clocks = <&scmi_clk 343>;
+		assigned-clock-parents = <&scmi_clk 341>;
+		assigned-clock-rates = <25000000>;
+		status = "disabled";
+	};
+
+	dss: dss@30200000 {
+		compatible = "ti,am62l-dss";
+		reg = <0x00 0x30200000 0x00 0x1000>, /* common */
+		      <0x00 0x30202000 0x00 0x1000>, /* vidl1 */
+		      <0x00 0x30207000 0x00 0x1000>, /* ovr1 */
+		      <0x00 0x3020a000 0x00 0x1000>, /* vp1 */
+		      <0x00 0x30201000 0x00 0x1000>; /* common1 */
+		reg-names = "common", "vidl1", "ovr1", "vp1", "common1";
+		power-domains = <&scmi_pds 39>;
+		clocks = <&scmi_clk 162>,
+			 <&scmi_clk 161>;
+		clock-names = "fck", "vp1";
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+
+		dss_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	dsi0: dsi@30500000 {
+		compatible = "ti,j721e-dsi";
+		reg = <0x00 0x30500000 0x00 0x100000>,
+		      <0x00 0x30270000 0x00 0x100>;
+		clocks = <&scmi_clk 155>, <&scmi_clk 158>;
+		clock-names = "dsi_p_clk", "dsi_sys_clk";
+		power-domains = <&scmi_pds 38>;
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		phys = <&dphy_tx0>;
+		phy-names = "dphy";
+		status = "disabled";
+
+		dsi0_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+			};
+
+			port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
 	gpmc0: memory-controller@3b000000 {
 		compatible = "ti,am64-gpmc";
 		power-domains = <&scmi_pds 37>;