Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Chancel Liu <chancel.liu@oss.nxp.com>
To: Frank.Li@nxp.com, s.hauer@pengutronix.de, robh@kernel.org,
	krzk+dt@kernel.org, conor+dt@kernel.org, imx@lists.linux.dev
Cc: kernel@pengutronix.de, festevam@gmail.com,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2 05/17] arm64: dts: imx93-11x11-evk: Add MQS1 pinmux, clocks and mark conflicting devices
Date: Tue, 18 Aug 2026 12:01:59 +0900	[thread overview]
Message-ID: <20260818030211.3141710-6-chancel.liu@oss.nxp.com> (raw)
In-Reply-To: <20260818030211.3141710-1-chancel.liu@oss.nxp.com>

From: Chancel Liu <chancel.liu@nxp.com>

MQS1 shares pins with PDM and its sound card conflicts with the BT SCO
card. Add the MQS1 pinctrl group and label the conflicting device and
card so the shared imx9-mqs overlay can disable them. The overlay and
its Makefile rule are added in a later patch.

Update SAI1 clock assignments to provide the MQS MCLK source.

Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
---
 .../boot/dts/freescale/imx93-11x11-evk.dts    | 20 +++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
index 4418fc6a0901..71822d06ebf6 100644
--- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
@@ -71,7 +71,7 @@ bt_sco_codec: bt-sco-codec {
 		#sound-dai-cells = <1>;
 	};
 
-	sound-bt-sco {
+	mqs1_conflict_card: sound-bt-sco {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "bt-sco-audio";
 		simple-audio-card,format = "dsp_a";
@@ -105,7 +105,7 @@ cpu {
 	};
 };
 
-&micfil {
+mqs1_conflict_dev: &micfil {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&pinctrl_pdm>, <&pdm_fun>;
 	pinctrl-1 = <&pinctrl_pdm_sleep>;
@@ -115,6 +115,11 @@ &micfil {
 	status = "okay";
 };
 
+&mqs1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mqs1>, <&mqs1_fun>;
+};
+
 &pcal6524 {
 	m2-pcm-level-shifter-hog {
 		gpio-hog;
@@ -127,6 +132,10 @@ &sai1 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&pinctrl_sai1>;
 	pinctrl-1 = <&pinctrl_sai1_sleep>;
+	clocks = <&clk IMX93_CLK_SAI1_IPG>, <&clk IMX93_CLK_DUMMY>,
+		 <&clk IMX93_CLK_SAI1_GATE>, <&clk IMX93_CLK_DUMMY>,
+		 <&clk IMX93_CLK_DUMMY>, <&clk IMX93_CLK_AUDIO_PLL>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k";
 	assigned-clocks = <&clk IMX93_CLK_SAI1>;
 	assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
 	assigned-clock-rates = <12288000>;
@@ -150,6 +159,13 @@ &usdhc3 {
 };
 
 &iomuxc {
+	pinctrl_mqs1: mqs1grp {
+		fsl,pins = <
+			MX93_PAD_PDM_CLK__MQS1_LEFT			0x31e
+			MX93_PAD_PDM_BIT_STREAM0__MQS1_RIGHT		0x31e
+		>;
+	};
+
 	pinctrl_pdm: pdmgrp {
 		fsl,pins = <
 			MX93_PAD_PDM_CLK__PDM_CLK			0x31e
-- 
2.50.1



  parent reply	other threads:[~2026-08-18  3:03 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-18  3:01 [PATCH v2 00/17] arm64: dts: Add MQS1 sound card support for i.MX9 EVK platforms Chancel Liu
2026-08-18  3:01 ` [PATCH v2 01/17] arm64: dts: imx91_93_common: Add clock and sound-dai-cells properties for MQS Chancel Liu
2026-08-18  3:01 ` [PATCH v2 02/17] arm64: dts: imx91-11x11-evk: Add board muxes to select between PDM and MQS1 Chancel Liu
2026-08-18  3:01 ` [PATCH v2 03/17] arm64: dts: imx91-11x11-evk: Add MQS1 pinmux, clocks and mark conflicting devices Chancel Liu
2026-08-18  3:01 ` [PATCH v2 04/17] arm64: dts: imx93-11x11-evk: Add board muxes to select between PDM and MQS1 Chancel Liu
2026-08-18  3:01 ` Chancel Liu [this message]
2026-08-18  3:02 ` [PATCH v2 06/17] arm64: dts: imx93-14x14-evk: Add board muxes to select between FlexCAN1 " Chancel Liu
2026-08-18  3:02 ` [PATCH v2 07/17] arm64: dts: imx93-14x14-evk: Add MQS1 pinmux, clocks and mark conflicting devices Chancel Liu
2026-08-18  3:02 ` [PATCH v2 08/17] arm64: dts: imx94: Add clock and sound-dai-cells properties for MQS1 Chancel Liu
2026-08-18  3:02 ` [PATCH v2 09/17] arm64: dts: imx943-evk: Add board muxes to select between CAN1/PDM and MQS1/MIC Chancel Liu
2026-08-18  3:02 ` [PATCH v2 10/17] arm64: dts: imx943-evk: Add MQS1 pinmux, clocks and mark conflicting devices Chancel Liu
2026-08-18  3:02 ` [PATCH v2 11/17] arm64: dts: imx95: Add clock and sound-dai-cells properties for MQS1 Chancel Liu
2026-08-18  3:02 ` [PATCH v2 12/17] arm64: dts: imx95-15x15-evk: Add board muxes to select between PDM and MQS1 Chancel Liu
2026-08-18  3:02 ` [PATCH v2 13/17] arm64: dts: imx95-15x15-evk: Add MQS1 pinmux, clocks and mark conflicting devices Chancel Liu
2026-08-18  3:02 ` [PATCH v2 14/17] arm64: dts: imx952: Add AONMIX MQS device node Chancel Liu
2026-08-18  3:02 ` [PATCH v2 15/17] arm64: dts: imx952-evk: Add board muxes to select between CAN1/PDM Chancel Liu
2026-08-18  3:02 ` [PATCH v2 16/17] arm64: dts: imx952-evk: Add MQS1 pinmux, clocks and mark conflicting devices Chancel Liu
2026-08-18  3:02 ` [PATCH v2 17/17] arm64: dts: fsl: Add DT overlay to build MQS1 sound cards on i.MX9 platforms Chancel Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260818030211.3141710-6-chancel.liu@oss.nxp.com \
    --to=chancel.liu@oss.nxp.com \
    --cc=Frank.Li@nxp.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox