From: Fuad Tabba <fuad.tabba@linux.dev>
To: Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>,
linux-arm-kernel@lists.infradead.org
Cc: Marc Zyngier <maz@kernel.org>, Oliver Upton <oupton@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Suzuki K Poulose <suzuki.poulose@arm.com>,
Mark Brown <broonie@kernel.org>,
kvmarm@lists.linux.dev, linux-kernel@vger.kernel.org,
Fuad Tabba <tabba@google.com>
Subject: [PATCH v4 2/2] arm64: Don't read GMID_EL1 when MTE is disabled
Date: Tue, 25 Aug 2026 17:42:19 +0100 [thread overview]
Message-ID: <20260825164219.3347229-3-fuad.tabba@linux.dev> (raw)
In-Reply-To: <20260825164219.3347229-1-fuad.tabba@linux.dev>
__cpuinfo_store_cpu() gates the GMID_EL1 read on the raw
ID_AA64PFR1_EL1, so it reads the register even when the kernel has
disabled MTE (CONFIG_ARM64_MTE=n or arm64.nomte). KVM sets HCR_EL2.TID5
in that case, and pKVM injects an UNDEF the host cannot handle:
Internal error: Oops - Undefined instruction: 0000000002000000 [#1] SMP
pc : __cpuinfo_store_cpu+0xf4/0x264
Kernel panic - not syncing: Attempted to kill the idle task!
Only pKVM reaches it, and only after a CPU is offlined and brought back
online: its CPU_ON relay sets the host HCR before the CPU enters EL1,
while plain nVHE sets it at CPUHP_AP_KVM_ONLINE.
Gate the read on __read_sysreg_by_encoding(), which applies the cmdline
override, and on CONFIG_ARM64_MTE, which no register reflects.
Fixes: f35abcbb8a084 ("KVM: arm64: Trap MTE access and discovery when MTE is disabled")
Cc: stable@vger.kernel.org # needs "arm64: Apply overrides to CPU local capabilities"
Signed-off-by: Fuad Tabba <fuad.tabba@linux.dev>
---
arch/arm64/include/asm/cpufeature.h | 9 +++++++++
arch/arm64/kernel/cpufeature.c | 6 ++----
arch/arm64/kernel/cpuinfo.c | 2 +-
3 files changed, 12 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h
index a57870fa96db5..0b374e938f708 100644
--- a/arch/arm64/include/asm/cpufeature.h
+++ b/arch/arm64/include/asm/cpufeature.h
@@ -1085,6 +1085,15 @@ static inline bool cpu_has_lpa2(void)
#endif
}
+/* No ID register reflects CONFIG_ARM64_MTE. */
+static inline bool gmid_el1_accessible(void)
+{
+ if (!IS_ENABLED(CONFIG_ARM64_MTE))
+ return false;
+
+ return id_aa64pfr1_mte(__read_sysreg_by_encoding(SYS_ID_AA64PFR1_EL1));
+}
+
#endif /* __ASSEMBLER__ */
#endif
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index 88b15b5ef2f7f..23f174b3c4e26 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -1228,7 +1228,7 @@ void __init init_cpu_features(struct cpuinfo_arm64 *info)
init_cpu_ftr_reg(SYS_MPAMIDR_EL1, info->reg_mpamidr);
}
- if (id_aa64pfr1_mte(info->reg_id_aa64pfr1))
+ if (gmid_el1_accessible())
init_cpu_ftr_reg(SYS_GMID_EL1, info->reg_gmid);
}
@@ -1523,11 +1523,9 @@ void update_cpu_features(int cpu,
* they read/write depends on the GMID_EL1.BS field. Check that the
* value is the same on all CPUs.
*/
- if (IS_ENABLED(CONFIG_ARM64_MTE) &&
- id_aa64pfr1_mte(info->reg_id_aa64pfr1)) {
+ if (gmid_el1_accessible())
taint |= check_update_ftr_reg(SYS_GMID_EL1, cpu,
info->reg_gmid, boot->reg_gmid);
- }
/*
* If we don't have AArch32 at all then skip the checks entirely
diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c
index d50e2a9b066b3..389fca84f106b 100644
--- a/arch/arm64/kernel/cpuinfo.c
+++ b/arch/arm64/kernel/cpuinfo.c
@@ -502,7 +502,7 @@ static void __cpuinfo_store_cpu(struct cpuinfo_arm64 *info)
info->reg_id_aa64smfr0 = read_cpuid(ID_AA64SMFR0_EL1);
info->reg_id_aa64fpfr0 = read_cpuid(ID_AA64FPFR0_EL1);
- if (id_aa64pfr1_mte(info->reg_id_aa64pfr1))
+ if (gmid_el1_accessible())
info->reg_gmid = read_cpuid(GMID_EL1);
if (id_aa64pfr0_32bit_el0(info->reg_id_aa64pfr0))
--
2.39.5
next prev parent reply other threads:[~2026-08-25 16:42 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-25 16:42 [PATCH v4 0/2] arm64: Clamp ID overrides and gate the GMID_EL1 read Fuad Tabba
2026-08-25 16:42 ` [PATCH v4 1/2] arm64: Apply overrides to CPU local capabilities Fuad Tabba
2026-08-26 13:47 ` Catalin Marinas
2026-08-27 8:58 ` Fuad Tabba
2026-08-25 16:42 ` Fuad Tabba [this message]
2026-08-26 13:48 ` [PATCH v4 2/2] arm64: Don't read GMID_EL1 when MTE is disabled Catalin Marinas
2026-08-27 12:56 ` Will Deacon
2026-08-27 13:19 ` Will Deacon
2026-08-28 10:50 ` Catalin Marinas
2026-08-28 13:53 ` Will Deacon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260825164219.3347229-3-fuad.tabba@linux.dev \
--to=fuad.tabba@linux.dev \
--cc=broonie@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=kvmarm@lists.linux.dev \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=maz@kernel.org \
--cc=oupton@kernel.org \
--cc=suzuki.poulose@arm.com \
--cc=tabba@google.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox