[PATCH net v3 5/5] selftests: drv-net: Add VLAN test

[Ovidiu Panait <ovidiu.panait.rb@renesas.com>]

Add a test that validates ping traffic over VLAN interfaces. It aims
to catch drivers which mishandle hardware VLAN tag stripping, in
particular QinQ.

Three VLAN configurations are covered, each with hardware VLAN stripping
enabled and disabled:
- a single 802.1q VLAN interface
- a single 802.1ad VLAN interface
- an 802.1q VLAN stacked on top of an 802.1ad interface

NETIF=end1 LOCAL_V4=172.16.0.2 REMOTE_V4=172.16.0.3 \
REMOTE_TYPE=ssh REMOTE_ARGS=root@172.16.0.3 \
run_kselftest.sh -t drivers/net/hw:vlan.py
  TAP version 13
  1..1
  # timeout set to 0
  # selftests: drivers/net/hw: vlan.py
  # # Interface: end1, driver: st_gmac
  # TAP version 13
  # 1..6
  # ok 1 vlan.test.8021q_hw
  # ok 2 vlan.test.8021q_sw
  # ok 3 vlan.test.8021ad_hw
  # ok 4 vlan.test.8021ad_sw
  # ok 5 vlan.test.qinq_hw
  # ok 6 vlan.test.qinq_sw
  # # Totals: pass:6 fail:0 xfail:0 xpass:0 skip:0 error:0
  ok 1 selftests: drivers/net/hw: vlan.py
  # Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0

Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
---
v3 changes:
- Moved the selftest to drivers/net/hw, as the _hw variants couldn't run
  under netdevsim.
- Fixed "ruff check" and "pylint --disable=R" warnings.
- Added CONFIG_VLAN_8021Q=m to configs file.

v2 changes:
- New patch.

 .../testing/selftests/drivers/net/hw/Makefile |   1 +
 tools/testing/selftests/drivers/net/hw/config |   1 +
 .../testing/selftests/drivers/net/hw/vlan.py  | 109 ++++++++++++++++++
 3 files changed, 111 insertions(+)
 create mode 100755 tools/testing/selftests/drivers/net/hw/vlan.py

diff --git a/tools/testing/selftests/drivers/net/hw/Makefile b/tools/testing/selftests/drivers/net/hw/Makefile
index 78bb0169350b..886a4222c6cf 100644
--- a/tools/testing/selftests/drivers/net/hw/Makefile
+++ b/tools/testing/selftests/drivers/net/hw/Makefile
@@ -49,6 +49,7 @@ TEST_PROGS = \
 	tso.py \
 	userns_devmem.py \
 	uso.py \
+	vlan.py \
 	xdp_metadata.py \
 	xsk_reconfig.py \
 	#
diff --git a/tools/testing/selftests/drivers/net/hw/config b/tools/testing/selftests/drivers/net/hw/config
index d89a9ba17655..c6c2b64bb712 100644
--- a/tools/testing/selftests/drivers/net/hw/config
+++ b/tools/testing/selftests/drivers/net/hw/config
@@ -24,5 +24,6 @@ CONFIG_NET_SCH_INGRESS=y
 CONFIG_SYNC_FILE=y
 CONFIG_UDMABUF=y
 CONFIG_USER_NS=y
+CONFIG_VLAN_8021Q=m
 CONFIG_VXLAN=y
 CONFIG_XFRM_USER=y
diff --git a/tools/testing/selftests/drivers/net/hw/vlan.py b/tools/testing/selftests/drivers/net/hw/vlan.py
new file mode 100755
index 000000000000..79eec655973b
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/hw/vlan.py
@@ -0,0 +1,109 @@
+#!/usr/bin/env python3
+# SPDX-License-Identifier: GPL-2.0
+
+"""
+VLAN tests.
+
+Validates that ping traffic is sent and received correctly over 802.1q
+and 802.1ad VLAN interfaces, with hardware VLAN stripping enabled and
+disabled.
+
+Test cases:
+  - 8021q_hw:  Traffic over a single 802.1q VLAN, HW stripping on
+  - 8021q_sw:  Traffic over a single 802.1q VLAN, HW stripping off
+  - 8021ad_hw: Traffic over a single 802.1ad VLAN, HW stripping on
+  - 8021ad_sw: Traffic over a single 802.1ad VLAN, HW stripping off
+  - qinq_hw:   Traffic over an 802.1q VLAN stacked on an 802.1ad VLAN,
+               HW stripping on
+  - qinq_sw:   Traffic over an 802.1q VLAN stacked on an 802.1ad VLAN,
+               HW stripping off
+"""
+
+import os
+
+from lib.py import (
+    KsftNamedVariant,
+    NetDrvEpEnv,
+    cmd,
+    defer,
+    ethtool,
+    ip,
+    ksft_exit,
+    ksft_run,
+    ksft_variants,
+    set_ethtool_feat,
+)
+
+OUTER_DEV = f"vlout{os.getpid()}"
+INNER_DEV = f"vlin{os.getpid()}"
+
+OUTER_VID = 100
+INNER_VID = 200
+
+LOCAL_IP = "198.51.100.1"
+REMOTE_IP = "198.51.100.2"
+
+
+def _vlan_add(base, name, proto, vid, host=None):
+    """Create a VLAN device on top of base and bring it up."""
+
+    ip(f"link add link {base} name {name} type vlan proto {proto} id {vid}",
+       host=host)
+    defer(ip, f"link del {name}", host=host)
+    ip(f"link set {name} up", host=host)
+
+
+def _vlan_setup(base, addr, outer_proto, inner_proto, host=None):
+    """Create VLAN interfaces on base and set an IP on the innermost one."""
+
+    _vlan_add(base, OUTER_DEV, outer_proto, OUTER_VID, host=host)
+    if inner_proto:
+        _vlan_add(OUTER_DEV, INNER_DEV, inner_proto, INNER_VID, host=host)
+
+    dev = INNER_DEV if inner_proto else OUTER_DEV
+    ip(f"addr add {addr}/24 dev {dev}", host=host)
+
+
+def _setup(cfg, outer_proto, inner_proto, hw_strip):
+    """Configure VLAN stripping and create the VLAN interfaces."""
+
+    feat = ethtool(f"-k {cfg.ifname}", json=True)[0]
+    set_ethtool_feat(cfg.ifname, feat, {"rx-vlan-offload": hw_strip})
+
+    _vlan_setup(cfg.ifname, LOCAL_IP, outer_proto, inner_proto)
+    _vlan_setup(cfg.remote_ifname, REMOTE_IP, outer_proto, inner_proto,
+                host=cfg.remote)
+
+
+def _vlan_variants():
+    """Generator that yields the VLAN protocols and the stripping mode."""
+
+    yield KsftNamedVariant("8021q_hw", "802.1q", None, True)
+    yield KsftNamedVariant("8021q_sw", "802.1q", None, False)
+    yield KsftNamedVariant("8021ad_hw", "802.1ad", None, True)
+    yield KsftNamedVariant("8021ad_sw", "802.1ad", None, False)
+    yield KsftNamedVariant("qinq_hw", "802.1ad", "802.1q", True)
+    yield KsftNamedVariant("qinq_sw", "802.1ad", "802.1q", False)
+
+
+@ksft_variants(_vlan_variants())
+def test(cfg, outer_proto, inner_proto, hw_strip):
+    """Run a single VLAN test"""
+
+    cfg.require_ipver("4")
+
+    _setup(cfg, outer_proto, inner_proto, hw_strip)
+
+    cmd(f"ping -c 1 -W 5 {REMOTE_IP}")
+
+
+def main() -> None:
+    """ Ksft boiler plate main """
+
+    with NetDrvEpEnv(__file__) as cfg:
+        ksft_run(cases=[test], args=(cfg, ))
+    ksft_exit()
+
+
+if __name__ == "__main__":
+    main()
-- 
2.34.1