On Wed, Aug 26, 2026 at 09:35:01AM -0500, Frank Li wrote: > On Wed, Aug 26, 2026 at 03:40:44PM +0200, Larisa Grigore wrote: > > [You don't often get email from larisa.grigore@oss.nxp.com. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ] > > > > Document the device tree binding for the NXP S32N79 DWC-based UFS host > > controller which is compliant with JESD-223D "Universal Flash Storage Host > > Controller Interface" v3.0. > > > > The controller requires access to the SCM register block and the core > > clock rate when M-PHY initialization is performed. Add the optional > > nxp,mphy-boot-mode property to select the M-PHY firmware execution > > environment. > > Currently, the M-PHY firmware can only run from ROM. If the property is > > omitted, M-PHY initialization is assumed to be handled externally. > > > > Signed-off-by: Larisa Grigore > > --- > > .../bindings/ufs/nxp,s32n7-ufshc.yaml | 99 +++++++++++++++++++ > > 1 file changed, 99 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/ufs/nxp,s32n7-ufshc.yaml > > > > diff --git a/Documentation/devicetree/bindings/ufs/nxp,s32n7-ufshc.yaml b/Documentation/devicetree/bindings/ufs/nxp,s32n7-ufshc.yaml > > new file mode 100644 > > index 000000000000..d9d5669be313 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/ufs/nxp,s32n7-ufshc.yaml > > @@ -0,0 +1,99 @@ > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/ufs/nxp,s32n7-ufshc.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: NXP S32N79 Universal Flash Storage (UFS) Controller > > + > > +maintainers: > > + - Larisa Grigore > > + > > +# Select only our matches, not all jedec,ufs > > +select: > > + properties: > > + compatible: > > + contains: > > + const: nxp,s32n79-ufshc > > + required: > > + - compatible > > + > > +properties: > > + compatible: > > + items: > > + - const: nxp,s32n79-ufshc > > + - const: jedec,ufs-3.0 > > Any place actually use this fallback? I don't think that this exists anywhere already: https://lore.kernel.org/all/?q=%22jedec%2Cufs-3.0%22 $ git checkout korg-next/master Previous HEAD position was 2697ef8943c9 Add linux-next specific files for 20260813 HEAD is now at f82a5da2f049 Add linux-next specific files for 20260826 $ rg jedec,ufs-3.0 $ So not entirely sure what the point of this actually is, if the driver doesn't use the fallback. pw-bot: changes-requested Thanks, Conor.