[PATCH 4/5] spi: spi-sun4i: sun4i_spi_handler(): fix race condition between transfer completion and RX FIFO interrupt

[Jonas Rebmann <jre@pengutronix.de>]

From: Marc Kleine-Budde <mkl@pengutronix.de>

In commit 196737912da5 ("spi: sun4i: Allow transfers larger than FIFO
size"), support for transfers larger than the FIFO size was added.

This commit moves the draining of the RX-FIFO from
sun4i_spi_transfer_one() (after completion of the transfer) to the IRQ
handler when the IRQ "transfer complete" is handled. In addition, the
IRQ "RX-FIFO 3/4 full" is activated for all transfers.

However, this does not take into account that the RX-IRQ for transfers
that exceed 3/4 of the FIFO size is still pending after the IRQ
"transfer complete" has been processed. All interrupt sources are only
deactivated after the wait_for_completion_timeout() in
sun4i_spi_transfer_one().

This opens a race window for "RX-FIFO 3/4 full" interrupts to come.
The sequence is as follows:

| sun4i_spi_transfer_one()
|     sun4i_spi_fill_fifo()       // fill TX-FIFO with 48 bytes
|     // enable RX-FIFO 3/4 full IRQ
|     wait_for_completion_timeout();
|
| // SPI controller transfers 48 bytes
| // SPI controller issues "transfer complete" and "RX-FIFO 3/4 full" IRQ
|
| // IRQ handler start
|     sun4i_spi_handler()
|         // ACK "transfer complete" IRQ
|         sun4i_spi_drain_fifo();
|         complete();                         ----.
|         return IRQ_HANDLED;                      \
| // IRQ handler end                                \__ race
|                                                   /   window
|     // wait_for_completion_timeout() continues   /
|     // disable all IRQ sources              ----'

Avoid the race condition by disabling all interrupts when handling the
"transfer complete" IRQ and before calling complete(). Also move the
draining of the RX-FIFO back into sun4i_spi_transfer_one() where it
was before commit 196737912da5 ("spi: sun4i: Allow transfers larger than
FIFO size").

This has the added benefit of spending a little less time in the IRQ
handler.

Cc: Tobias Schramm <t.schramm@manjaro.org>
Fixes: 196737912da5 ("spi: sun4i: Allow transfers larger than FIFO size")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
---
 drivers/spi/spi-sun4i.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-sun4i.c b/drivers/spi/spi-sun4i.c
index ae009d598450..18951c1972da 100644
--- a/drivers/spi/spi-sun4i.c
+++ b/drivers/spi/spi-sun4i.c
@@ -333,6 +333,9 @@ static int sun4i_spi_transfer_one(struct spi_controller *host,
 	start = jiffies;
 	time_left = wait_for_completion_timeout(&sspi->done,
 						msecs_to_jiffies(tx_time));
+
+	sun4i_spi_drain_fifo(sspi, SUN4I_FIFO_DEPTH);
+
 	end = jiffies;
 	if (!time_left) {
 		dev_warn(&host->dev,
@@ -340,13 +343,12 @@ static int sun4i_spi_transfer_one(struct spi_controller *host,
 			 dev_name(&spi->dev), tfr->len, tfr->speed_hz,
 			 jiffies_to_msecs(end - start), tx_time);
 		ret = -ETIMEDOUT;
+		sun4i_spi_write(sspi, SUN4I_INT_CTL_REG, 0);
 		goto out;
 	}
 
 
 out:
-	sun4i_spi_write(sspi, SUN4I_INT_CTL_REG, 0);
-
 	return ret;
 }
 
@@ -357,8 +359,7 @@ static irqreturn_t sun4i_spi_handler(int irq, void *dev_id)
 
 	/* Transfer complete */
 	if (status & SUN4I_INT_CTL_TC) {
-		sun4i_spi_write(sspi, SUN4I_INT_STA_REG, SUN4I_INT_CTL_TC);
-		sun4i_spi_drain_fifo(sspi, SUN4I_FIFO_DEPTH);
+		sun4i_spi_write(sspi, SUN4I_INT_CTL_REG, 0);
 		complete(&sspi->done);
 		return IRQ_HANDLED;
 	}

-- 
2.55.0.123.gf60db8d575