[PATCH 7/8] i2c: omap: Switch to using BIT and GENMASK

[Andrew Davis <afd@ti.com>]

We have helpers for setting bit values and masks. Use them.

Signed-off-by: Andrew Davis <afd@ti.com>
---
 drivers/i2c/busses/i2c-omap.c | 82 +++++++++++++++++------------------
 1 file changed, 41 insertions(+), 41 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index a50cf195c28cf..41464f92da046 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -79,64 +79,64 @@ enum {
 };
 
 /* I2C Status bits (OMAP_I2C_IE, OMAP_I2C_STAT, OMAP_I2C_WE) */
-#define OMAP_I2C_STAT_XDR	(1 << 14)	/* TX Buffer draining */
-#define OMAP_I2C_STAT_RDR	(1 << 13)	/* RX Buffer draining */
-#define OMAP_I2C_STAT_BB	(1 << 12)	/* Bus busy */
-#define OMAP_I2C_STAT_ROVR	(1 << 11)	/* Receive overrun */
-#define OMAP_I2C_STAT_XUDF	(1 << 10)	/* Transmit underflow */
-#define OMAP_I2C_STAT_AAS	(1 << 9)	/* Address as slave */
-#define OMAP_I2C_STAT_BF	(1 << 8)	/* Bus Free */
-#define OMAP_I2C_STAT_STC	(1 << 6)	/* Start condition */
-#define OMAP_I2C_STAT_GC	(1 << 5)	/* General call */
-#define OMAP_I2C_STAT_XRDY	(1 << 4)	/* Transmit data ready */
-#define OMAP_I2C_STAT_RRDY	(1 << 3)	/* Receive data ready */
-#define OMAP_I2C_STAT_ARDY	(1 << 2)	/* Register access ready */
-#define OMAP_I2C_STAT_NACK	(1 << 1)	/* No ack */
-#define OMAP_I2C_STAT_AL	(1 << 0)	/* Arbitration lost */
+#define OMAP_I2C_STAT_XDR	BIT(14)	/* TX Buffer draining */
+#define OMAP_I2C_STAT_RDR	BIT(13)	/* RX Buffer draining */
+#define OMAP_I2C_STAT_BB	BIT(12)	/* Bus busy */
+#define OMAP_I2C_STAT_ROVR	BIT(11)	/* Receive overrun */
+#define OMAP_I2C_STAT_XUDF	BIT(10)	/* Transmit underflow */
+#define OMAP_I2C_STAT_AAS	BIT(9)	/* Address as slave */
+#define OMAP_I2C_STAT_BF	BIT(8)	/* Bus Free */
+#define OMAP_I2C_STAT_STC	BIT(6)	/* Start condition */
+#define OMAP_I2C_STAT_GC	BIT(5)	/* General call */
+#define OMAP_I2C_STAT_XRDY	BIT(4)	/* Transmit data ready */
+#define OMAP_I2C_STAT_RRDY	BIT(3)	/* Receive data ready */
+#define OMAP_I2C_STAT_ARDY	BIT(2)	/* Register access ready */
+#define OMAP_I2C_STAT_NACK	BIT(1)	/* No ack */
+#define OMAP_I2C_STAT_AL	BIT(0)	/* Arbitration lost */
 
 /* I2C Buffer Configuration Register (OMAP_I2C_BUF): */
-#define OMAP_I2C_BUF_RDMA_EN	(1 << 15)	/* RX DMA channel enable */
-#define OMAP_I2C_BUF_RXFIF_CLR	(1 << 14)	/* RX FIFO Clear */
-#define OMAP_I2C_BUF_XDMA_EN	(1 << 7)	/* TX DMA channel enable */
-#define OMAP_I2C_BUF_TXFIF_CLR	(1 << 6)	/* TX FIFO Clear */
+#define OMAP_I2C_BUF_RDMA_EN	BIT(15)	/* RX DMA channel enable */
+#define OMAP_I2C_BUF_RXFIF_CLR	BIT(14)	/* RX FIFO Clear */
+#define OMAP_I2C_BUF_XDMA_EN	BIT(7)	/* TX DMA channel enable */
+#define OMAP_I2C_BUF_TXFIF_CLR	BIT(6)	/* TX FIFO Clear */
 
 /* I2C Configuration Register (OMAP_I2C_CON): */
-#define OMAP_I2C_CON_EN		(1 << 15)	/* I2C module enable */
-#define OMAP_I2C_CON_BE		(1 << 14)	/* Big endian mode */
-#define OMAP_I2C_CON_OPMODE_HS	(1 << 12)	/* High Speed support */
-#define OMAP_I2C_CON_STB	(1 << 11)	/* Start byte mode (master) */
-#define OMAP_I2C_CON_MST	(1 << 10)	/* Master/slave mode */
-#define OMAP_I2C_CON_TRX	(1 << 9)	/* TX/RX mode (master only) */
-#define OMAP_I2C_CON_XA		(1 << 8)	/* Expand address */
-#define OMAP_I2C_CON_RM		(1 << 2)	/* Repeat mode (master only) */
-#define OMAP_I2C_CON_STP	(1 << 1)	/* Stop cond (master only) */
-#define OMAP_I2C_CON_STT	(1 << 0)	/* Start condition (master) */
+#define OMAP_I2C_CON_EN		BIT(15)	/* I2C module enable */
+#define OMAP_I2C_CON_BE		BIT(14)	/* Big endian mode */
+#define OMAP_I2C_CON_OPMODE_HS	BIT(12)	/* High Speed support */
+#define OMAP_I2C_CON_STB	BIT(11)	/* Start byte mode (master) */
+#define OMAP_I2C_CON_MST	BIT(10)	/* Master/slave mode */
+#define OMAP_I2C_CON_TRX	BIT(9)	/* TX/RX mode (master only) */
+#define OMAP_I2C_CON_XA		BIT(8)	/* Expand address */
+#define OMAP_I2C_CON_RM		BIT(2)	/* Repeat mode (master only) */
+#define OMAP_I2C_CON_STP	BIT(1)	/* Stop cond (master only) */
+#define OMAP_I2C_CON_STT	BIT(0)	/* Start condition (master) */
 
 /* I2C SCL time value when Master */
 #define OMAP_I2C_SCLL_HSSCLL	8
 #define OMAP_I2C_SCLH_HSSCLH	8
 
 /* I2C System Test Register (OMAP_I2C_SYSTEST): */
-#define OMAP_I2C_SYSTEST_ST_EN		(1 << 15)	/* System test enable */
-#define OMAP_I2C_SYSTEST_FREE		(1 << 14)	/* Free running mode */
-#define OMAP_I2C_SYSTEST_TMODE_MASK	(3 << 12)	/* Test mode select */
+#define OMAP_I2C_SYSTEST_ST_EN		BIT(15)	/* System test enable */
+#define OMAP_I2C_SYSTEST_FREE		BIT(14)	/* Free running mode */
+#define OMAP_I2C_SYSTEST_TMODE_MASK	GENMASK(13, 12)	/* Test mode select */
 #define OMAP_I2C_SYSTEST_TMODE_SHIFT	(12)		/* Test mode select */
 /* Functional mode */
-#define OMAP_I2C_SYSTEST_SCL_I_FUNC	(1 << 8)	/* SCL line input value */
-#define OMAP_I2C_SYSTEST_SCL_O_FUNC	(1 << 7)	/* SCL line output value */
-#define OMAP_I2C_SYSTEST_SDA_I_FUNC	(1 << 6)	/* SDA line input value */
-#define OMAP_I2C_SYSTEST_SDA_O_FUNC	(1 << 5)	/* SDA line output value */
+#define OMAP_I2C_SYSTEST_SCL_I_FUNC	BIT(8)	/* SCL line input value */
+#define OMAP_I2C_SYSTEST_SCL_O_FUNC	BIT(7)	/* SCL line output value */
+#define OMAP_I2C_SYSTEST_SDA_I_FUNC	BIT(6)	/* SDA line input value */
+#define OMAP_I2C_SYSTEST_SDA_O_FUNC	BIT(5)	/* SDA line output value */
 /* SDA/SCL IO mode */
-#define OMAP_I2C_SYSTEST_SCL_I		(1 << 3)	/* SCL line sense in */
-#define OMAP_I2C_SYSTEST_SCL_O		(1 << 2)	/* SCL line drive out */
-#define OMAP_I2C_SYSTEST_SDA_I		(1 << 1)	/* SDA line sense in */
-#define OMAP_I2C_SYSTEST_SDA_O		(1 << 0)	/* SDA line drive out */
+#define OMAP_I2C_SYSTEST_SCL_I		BIT(3)	/* SCL line sense in */
+#define OMAP_I2C_SYSTEST_SCL_O		BIT(2)	/* SCL line drive out */
+#define OMAP_I2C_SYSTEST_SDA_I		BIT(1)	/* SDA line sense in */
+#define OMAP_I2C_SYSTEST_SDA_O		BIT(0)	/* SDA line drive out */
 
 /* OCP_SYSSTATUS bit definitions */
-#define OMAP_I2C_SYSS_RESETDONE		(1 << 0)
+#define OMAP_I2C_SYSS_RESETDONE		BIT(0)
 
 /* OCP_SYSCONFIG bit definitions */
-#define OMAP_I2C_SYSC_SOFTRESET		(1 << 1)
+#define OMAP_I2C_SYSC_SOFTRESET		BIT(1)
 
 /* Errata definitions */
 #define I2C_OMAP_ERRATA_I207		(1 << 0)
-- 
2.39.2