From: Sven Peter <sven@kernel.org>
To: Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Janne Grunau <j@jannau.net>,
Neal Gompa <neal@gompa.dev>,
Andreas Noever <andreas.noever@gmail.com>,
Mika Westerberg <westeri@kernel.org>,
Yehezkel Bernat <YehezkelShB@gmail.com>,
Philipp Zabel <p.zabel@pengutronix.de>
Cc: Konrad Dybcio <konradybcio@kernel.org>,
linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, asahi@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
Sven Peter <sven@kernel.org>
Subject: [PATCH v2 13/22] thunderbolt: Add ring register accessors to tb_nhi_ops
Date: Sun, 06 Sep 2026 20:36:36 +0200 [thread overview]
Message-ID: <20260906-b4-apple-soc-tbt-v2-13-1f80085f93fb@kernel.org> (raw)
In-Reply-To: <20260906-b4-apple-soc-tbt-v2-0-1f80085f93fb@kernel.org>
The ring descriptor and options registers are laid out differently on
the Apple NHI. Add optional tb_nhi_ops hooks for their base addresses
which fall back to the standard USB4 register layout when they are not
set.
Signed-off-by: Sven Peter <sven@kernel.org>
---
drivers/thunderbolt/nhi.c | 32 ++++++++++++++++++++++++++------
drivers/thunderbolt/nhi.h | 6 ++++++
2 files changed, 32 insertions(+), 6 deletions(-)
diff --git a/drivers/thunderbolt/nhi.c b/drivers/thunderbolt/nhi.c
index fc54ff7edfb9..1b1e4a12c744 100644
--- a/drivers/thunderbolt/nhi.c
+++ b/drivers/thunderbolt/nhi.c
@@ -179,19 +179,37 @@ void nhi_disable_interrupts(struct tb_nhi *nhi)
static void __iomem *ring_desc_base(struct tb_ring *ring)
{
void __iomem *io = ring->nhi->iobase;
+
io += ring->is_tx ? REG_TX_RING_BASE : REG_RX_RING_BASE;
io += ring->hop * 16;
return io;
}
+static void __iomem *nhi_ring_desc_base(struct tb_ring *ring)
+{
+ if (ring->nhi->ops->ring_desc_base)
+ return ring->nhi->ops->ring_desc_base(ring);
+
+ return ring_desc_base(ring);
+}
+
static void __iomem *ring_options_base(struct tb_ring *ring)
{
void __iomem *io = ring->nhi->iobase;
+
io += ring->is_tx ? REG_TX_OPTIONS_BASE : REG_RX_OPTIONS_BASE;
io += ring->hop * 32;
return io;
}
+static void __iomem *nhi_ring_options_base(struct tb_ring *ring)
+{
+ if (ring->nhi->ops->ring_options_base)
+ return ring->nhi->ops->ring_options_base(ring);
+
+ return ring_options_base(ring);
+}
+
static void ring_iowrite_cons(struct tb_ring *ring, u16 cons)
{
/*
@@ -199,29 +217,31 @@ static void ring_iowrite_cons(struct tb_ring *ring, u16 cons)
* are ignored by the hardware so we can save one ioread32() by
* filling the read-only bits with zeroes.
*/
- iowrite32(cons, ring_desc_base(ring) + 8);
+ iowrite32(cons, nhi_ring_desc_base(ring) + 8);
}
static void ring_iowrite_prod(struct tb_ring *ring, u16 prod)
{
/* See ring_iowrite_cons() above for explanation */
- iowrite32(prod << 16, ring_desc_base(ring) + 8);
+ iowrite32(prod << 16, nhi_ring_desc_base(ring) + 8);
}
static void ring_iowrite32desc(struct tb_ring *ring, u32 value, u32 offset)
{
- iowrite32(value, ring_desc_base(ring) + offset);
+ iowrite32(value, nhi_ring_desc_base(ring) + offset);
}
static void ring_iowrite64desc(struct tb_ring *ring, u64 value, u32 offset)
{
- iowrite32(value, ring_desc_base(ring) + offset);
- iowrite32(value >> 32, ring_desc_base(ring) + offset + 4);
+ void __iomem *base = nhi_ring_desc_base(ring);
+
+ iowrite32(value, base + offset);
+ iowrite32(value >> 32, base + offset + 4);
}
static void ring_iowrite32options(struct tb_ring *ring, u32 value, u32 offset)
{
- iowrite32(value, ring_options_base(ring) + offset);
+ iowrite32(value, nhi_ring_options_base(ring) + offset);
}
static bool ring_full(struct tb_ring *ring)
diff --git a/drivers/thunderbolt/nhi.h b/drivers/thunderbolt/nhi.h
index 4884c3f5a2b2..3a963b0b5b46 100644
--- a/drivers/thunderbolt/nhi.h
+++ b/drivers/thunderbolt/nhi.h
@@ -52,6 +52,10 @@ extern const struct dev_pm_ops nhi_pm_ops;
* @post_nvm_auth: hook to run after Thunderbolt 3 NVM authentication
* @request_ring_irq: NHI specific interrupt retrieval hook
* @release_ring_irq: NHI specific interrupt release hook
+ * @ring_desc_base: NHI specific hook returning the ring descriptor registers.
+ * If not set the standard USB4 NHI registers are used.
+ * @ring_options_base: NHI specific hook returning the ring option registers.
+ * If not set the standard USB4 NHI registers are used.
* @ring_interrupt_active: NHI specific hook to activate/deactivate the
* interrupt of a single ring. If not set the
* standard USB4 NHI registers are used.
@@ -70,6 +74,8 @@ struct tb_nhi_ops {
void (*post_nvm_auth)(struct tb_nhi *nhi);
int (*request_ring_irq)(struct tb_ring *ring, bool no_suspend);
void (*release_ring_irq)(struct tb_ring *ring);
+ void __iomem *(*ring_desc_base)(struct tb_ring *ring);
+ void __iomem *(*ring_options_base)(struct tb_ring *ring);
void (*ring_interrupt_active)(struct tb_ring *ring, bool active);
bool (*is_present)(struct tb_nhi *nhi);
int (*init_interrupts)(struct tb_nhi *nhi);
--
2.55.0
next prev parent reply other threads:[~2026-09-06 18:37 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-06 18:36 [PATCH v2 00/22] Initial USB4/Thunderbolt support for Apple M1/M2/M3 SoCs Sven Peter
2026-09-06 18:36 ` [PATCH v2 01/22] usb: typec: Add alternate mode state notifiers Sven Peter
2026-09-07 13:27 ` Joshua Peisach
2026-09-08 12:00 ` Heikki Krogerus
2026-09-06 18:36 ` [PATCH v2 02/22] usb: typec: Represent USB4 on the Type-C bus Sven Peter
2026-09-07 13:31 ` Joshua Peisach
2026-09-08 12:07 ` Heikki Krogerus
2026-09-06 18:36 ` [PATCH v2 03/22] usb: typec: tipd: Register a USB4 port mode for CD321x Sven Peter
2026-09-06 18:36 ` [PATCH v2 04/22] usb: typec: tipd: Publish CD321x partner alternate modes Sven Peter
2026-09-06 18:36 ` [PATCH v2 05/22] dt-bindings: thunderbolt: Add Apple USB4/Thunderbolt NHI Sven Peter
2026-09-06 18:36 ` [PATCH v2 06/22] dt-bindings: thunderbolt: Add Apple USB4/Thunderbolt ACIO block Sven Peter
2026-09-06 18:36 ` [PATCH v2 07/22] thunderbolt: Try reading host DROM from device tree first Sven Peter
2026-09-06 18:36 ` [PATCH v2 08/22] thunderbolt: Don't read the UID if we already know it Sven Peter
2026-09-06 18:36 ` [PATCH v2 09/22] thunderbolt: Allocate ring HopID before requesting the ring interrupt Sven Peter
2026-09-06 18:36 ` [PATCH v2 10/22] thunderbolt: Unlock host router ports during startup Sven Peter
2026-09-08 8:22 ` Mika Westerberg
2026-09-06 18:36 ` [PATCH v2 11/22] thunderbolt: Find Apple VSE capability " Sven Peter
2026-09-07 13:38 ` Joshua Peisach
2026-09-08 20:24 ` Sven Peter
2026-09-06 18:36 ` [PATCH v2 12/22] thunderbolt: Add ring_interrupt_active to tb_nhi_ops Sven Peter
2026-09-06 18:36 ` Sven Peter [this message]
2026-09-08 8:32 ` [PATCH v2 13/22] thunderbolt: Add ring register accessors " Mika Westerberg
2026-09-06 18:36 ` [PATCH v2 14/22] thunderbolt: Add ring_interrupt_mask " Sven Peter
2026-09-06 18:36 ` [PATCH v2 15/22] thunderbolt: Add ring_configure " Sven Peter
2026-09-06 18:36 ` [PATCH v2 16/22] thunderbolt: Add add_links " Sven Peter
2026-09-08 8:35 ` Mika Westerberg
2026-09-06 18:36 ` [PATCH v2 17/22] thunderbolt: Add QUIRK_NO_USB3_BW_ALLOC Sven Peter
2026-09-06 18:36 ` [PATCH v2 18/22] thunderbolt: Export symbols required by the Apple Silicon driver Sven Peter
2026-09-06 18:36 ` [PATCH v2 19/22] thunderbolt: Add Apple Silicon support Sven Peter
2026-09-08 9:18 ` Mika Westerberg
2026-09-08 19:02 ` Sven Peter
2026-09-08 19:04 ` Sven Peter
2026-09-09 6:06 ` Mika Westerberg
2026-09-09 15:20 ` Sven Peter
2026-09-09 15:25 ` Sven Peter
2026-09-10 4:52 ` Mika Westerberg
2026-09-10 4:50 ` Mika Westerberg
2026-09-06 18:36 ` [PATCH v2 20/22] arm64: dts: apple: t8103: Add USB4 ACIO and NHI Sven Peter
2026-09-06 18:36 ` [PATCH v2 21/22] arm64: dts: apple: t8112: " Sven Peter
2026-09-06 18:36 ` [PATCH v2 22/22] arm64: dts: apple: t60xx: " Sven Peter
2026-09-07 13:52 ` [PATCH v2 00/22] Initial USB4/Thunderbolt support for Apple M1/M2/M3 SoCs Joshua Peisach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260906-b4-apple-soc-tbt-v2-13-1f80085f93fb@kernel.org \
--to=sven@kernel.org \
--cc=YehezkelShB@gmail.com \
--cc=andreas.noever@gmail.com \
--cc=asahi@lists.linux.dev \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=j@jannau.net \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=neal@gompa.dev \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=westeri@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox