[PATCH] dmaengine: at_hdmac: use devm_clk_get_enabled()

[Rosen Penev <rosenp@gmail.com>]

Replace the devm_clk_get() + clk_prepare_enable() pair with
devm_clk_get_enabled(), which handles enable/disable and the
unprepare on driver detach automatically.  This lets us drop the
err_irq cleanup label and the clk_disable_unprepare() calls in
probe error paths and at_dma_remove().

Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 drivers/dma/at_hdmac.c | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)

diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index f4d0c72787d1..cae26ea890fa 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -1994,20 +1994,16 @@ static int __init at_dma_probe(struct platform_device *pdev)
 	atdma->dma_device.cap_mask = plat_dat->cap_mask;
 	atdma->all_chan_mask = (1 << plat_dat->nr_channels) - 1;
 
-	atdma->clk = devm_clk_get(&pdev->dev, "dma_clk");
+	atdma->clk = devm_clk_get_enabled(&pdev->dev, "dma_clk");
 	if (IS_ERR(atdma->clk))
 		return PTR_ERR(atdma->clk);
 
-	err = clk_prepare_enable(atdma->clk);
-	if (err)
-		return err;
-
 	/* force dma off, just in case */
 	at_dma_off(atdma);
 
 	err = request_irq(irq, at_dma_interrupt, 0, "at_hdmac", atdma);
 	if (err)
-		goto err_irq;
+		return err;
 
 	platform_set_drvdata(pdev, atdma);
 
@@ -2126,8 +2122,6 @@ static int __init at_dma_probe(struct platform_device *pdev)
 	dma_pool_destroy(atdma->lli_pool);
 err_desc_pool_create:
 	free_irq(irq, atdma);
-err_irq:
-	clk_disable_unprepare(atdma->clk);
 	return err;
 }
 
@@ -2145,8 +2139,6 @@ static void at_dma_remove(struct platform_device *pdev)
 	at_dma_cleanup_channels(atdma);
 	dma_pool_destroy(atdma->memset_pool);
 	dma_pool_destroy(atdma->lli_pool);
-
-	clk_disable_unprepare(atdma->clk);
 }
 
 static void at_dma_shutdown(struct platform_device *pdev)
-- 
2.55.0