From: Roman Vivchar via B4 Relay <devnull+rva333.protonmail.com@kernel.org>
To: Sen Chu <sen.chu@mediatek.com>,
Sean Wang <sean.wang@mediatek.com>,
Macpaul Lin <macpaul.lin@mediatek.com>,
Lee Jones <lee@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
Srinivas Kandagatla <srini@kernel.org>,
Roman Vivchar <rva333@protonmail.com>
Cc: Andy Shevchenko <andy@kernel.org>,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org,
Ben Grisdale <bengris32@protonmail.ch>
Subject: [PATCH v4 2/3] nvmem: add mt6323 PMIC EFUSE driver
Date: Fri, 11 Sep 2026 09:33:00 +0300 [thread overview]
Message-ID: <20260911-mt6323-nvmem-v4-2-626dd17531dc@protonmail.com> (raw)
In-Reply-To: <20260911-mt6323-nvmem-v4-0-626dd17531dc@protonmail.com>
From: Roman Vivchar <rva333@protonmail.com>
Add support for the EFUSE controller found in the Mediatek MT6323 PMIC.
The MT6323 EFUSE stores 24 bytes of hardware-related data, such as
thermal sensor calibration values.
Tested-by: Ben Grisdale <bengris32@protonmail.ch> # Amazon Echo Dot (2nd Generation)
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Roman Vivchar <rva333@protonmail.com>
---
MAINTAINERS | 5 +++
drivers/nvmem/Kconfig | 11 ++++++
drivers/nvmem/Makefile | 2 ++
drivers/nvmem/mt6323-efuse.c | 84 ++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 102 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 3a19da74d00c..6ec0ed61260c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16718,6 +16718,11 @@ S: Maintained
F: drivers/iio/adc/mt6323-auxadc.c
F: include/dt-bindings/iio/adc/mediatek,mt6323-auxadc.h
+MEDIATEK MT6323 PMIC NVMEM DRIVER
+M: Roman Vivchar <rva333@protonmail.com>
+S: Maintained
+F: drivers/nvmem/mt6323-efuse.c
+
MEDIATEK MT6735 CLOCK & RESET DRIVERS
M: Yassine Oudjana <y.oudjana@protonmail.com>
L: linux-clk@vger.kernel.org
diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index c36c2a4c2a0b..5115c46beb97 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -328,6 +328,17 @@ config NVMEM_MTK_EFUSE
This driver can also be built as a module. If so, the module
will be called efuse-mtk.
+config NVMEM_MT6323_EFUSE
+ tristate "MediaTek MT6323 PMIC EFUSE support"
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on MFD_MT6397
+ help
+ This is a driver to access hardware related data like sensor
+ calibration, etc.
+
+ This driver can also be built as a module. If so, the module
+ will be called efuse-mt6323.
+
config NVMEM_MXS_OCOTP
tristate "Freescale MXS On-Chip OTP Memory Support"
depends on ARCH_MXS || COMPILE_TEST
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index 2bbfb9ff1885..626936e4dfdd 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -55,6 +55,8 @@ obj-$(CONFIG_NVMEM_MICROCHIP_OTPC) += nvmem-microchip-otpc.o
nvmem-microchip-otpc-y := microchip-otpc.o
obj-$(CONFIG_NVMEM_MTK_EFUSE) += nvmem_mtk-efuse.o
nvmem_mtk-efuse-y := mtk-efuse.o
+obj-$(CONFIG_NVMEM_MT6323_EFUSE) += nvmem_mt6323-efuse.o
+nvmem_mt6323-efuse-y := mt6323-efuse.o
obj-$(CONFIG_NVMEM_MXS_OCOTP) += nvmem-mxs-ocotp.o
nvmem-mxs-ocotp-y := mxs-ocotp.o
obj-$(CONFIG_NVMEM_NINTENDO_OTP) += nvmem-nintendo-otp.o
diff --git a/drivers/nvmem/mt6323-efuse.c b/drivers/nvmem/mt6323-efuse.c
new file mode 100644
index 000000000000..6f6f1cdc2f38
--- /dev/null
+++ b/drivers/nvmem/mt6323-efuse.c
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2026 Roman Vivchar <rva333@protonmail.com>
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+#include <linux/mfd/mt6323/registers.h>
+
+#define MT6323_EFUSE_DOUT_BASE MT6323_EFUSE_DOUT_0_15
+#define MT6323_EFUSE_SIZE 24
+
+static int mt6323_efuse_read(void *context, unsigned int offset, void *val,
+ size_t bytes)
+{
+ struct regmap *map = context;
+ u16 *buf = val;
+ u32 tmp;
+ int ret;
+
+ /*
+ * A manual loop using regmap_read is required because PWRAP is not
+ * a continuous MMIO space, but rather a FSM that doesn't implement the
+ * necessary read callback for the regmap_read_raw and regmap_read_bulk
+ * functions.
+ */
+ for (size_t i = 0; i < bytes; i += sizeof(*buf)) {
+ ret = regmap_read(map, MT6323_EFUSE_DOUT_BASE + offset + i, &tmp);
+ if (ret)
+ return ret;
+
+ *buf++ = tmp;
+ }
+
+ return 0;
+}
+
+static int mt6323_efuse_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct nvmem_config config = {
+ .name = "mt6323-efuse",
+ .stride = 2,
+ .word_size = 2,
+ .size = MT6323_EFUSE_SIZE,
+ .reg_read = mt6323_efuse_read,
+ };
+ struct nvmem_device *nvmem;
+ struct regmap *regmap;
+
+ /* efuse -> mfd -> pwrap */
+ regmap = dev_get_regmap(dev->parent->parent, NULL);
+ if (!regmap)
+ return dev_err_probe(dev, -ENODEV, "failed to get regmap\n");
+
+ config.dev = dev;
+ config.priv = regmap;
+
+ nvmem = devm_nvmem_register(dev, &config);
+ return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static const struct of_device_id mt6323_efuse_of_match[] = {
+ { .compatible = "mediatek,mt6323-efuse" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, mt6323_efuse_of_match);
+
+static struct platform_driver mt6323_efuse_driver = {
+ .probe = mt6323_efuse_probe,
+ .driver = {
+ .name = "mt6323-efuse",
+ .of_match_table = mt6323_efuse_of_match,
+ },
+};
+module_platform_driver(mt6323_efuse_driver);
+
+MODULE_DESCRIPTION("MediaTek MT6323 PMIC EFUSE driver");
+MODULE_LICENSE("GPL");
--
2.55.0
next prev parent reply other threads:[~2026-09-11 6:34 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-11 6:32 [PATCH v4 0/3] nvmem: add support for the MediaTek mt6323 PMIC Roman Vivchar via B4 Relay
2026-09-11 6:32 ` [PATCH v4 1/3] dt-bindings: mfd: mediatek: mt6397: add mt6323 PMIC EFUSE Roman Vivchar via B4 Relay
2026-09-11 6:33 ` Roman Vivchar via B4 Relay [this message]
2026-09-11 6:33 ` [PATCH v4 3/3] ARM: dts: mediatek: mt6323: add EFUSE support Roman Vivchar via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260911-mt6323-nvmem-v4-2-626dd17531dc@protonmail.com \
--to=devnull+rva333.protonmail.com@kernel.org \
--cc=andy@kernel.org \
--cc=angelogioacchino.delregno@collabora.com \
--cc=bengris32@protonmail.ch \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=macpaul.lin@mediatek.com \
--cc=matthias.bgg@gmail.com \
--cc=robh@kernel.org \
--cc=rva333@protonmail.com \
--cc=sean.wang@mediatek.com \
--cc=sen.chu@mediatek.com \
--cc=srini@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox