From: Karl Mehltretter <kmehltretter@gmail.com>
To: Suzuki K Poulose <suzuki.poulose@arm.com>,
Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Karl Mehltretter <kmehltretter@gmail.com>,
Tao Zhang <tao.zhang@oss.qualcomm.com>,
Jie Gan <jie.gan@oss.qualcomm.com>,
Mike Leach <mike.leach@arm.com>,
James Clark <james.clark@linaro.org>, Leo Yan <leo.yan@arm.com>,
coresight@lists.linaro.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] ABI: coresight: tpda: Correct the kernel version to 7.0
Date: Sat, 12 Sep 2026 12:07:33 +0200 [thread overview]
Message-ID: <20260912100733.86226-1-kmehltretter@gmail.com> (raw)
Nine TPDA sysfs ABI entries name kernel version 6.20. All four commits
introducing these attributes first appeared in v7.0-rc1, after the
release following 6.19 was numbered 7.0.
Correct all nine KernelVersion fields to 7.0.
Fixes: f9cc5b5a9e9a ("coresight: tpda: add sysfs nodes for tpda cross-trigger configuration")
Fixes: 8e1c358a3b0e ("coresight: tpda: add global_flush_req sysfs node")
Fixes: 33f04ead7c49 ("coresight: tpda: add logic to configure TPDA_SYNCR register")
Fixes: a089d585a7f4 ("coresight: tpda: add sysfs node to flush specific port")
Assisted-by: LLM
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
---
.../testing/sysfs-bus-coresight-devices-tpda | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpda b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpda
index 650431feae45e725d4cdcc5f029a5d2a908ca2ed..0140ac97725e063c89a5d36a2ea5ae918ffb606c 100644
--- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpda
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpda
@@ -1,34 +1,34 @@
What: /sys/bus/coresight/devices/<tpda-name>/trig_async_enable
Date: December 2025
-KernelVersion: 6.20
+KernelVersion: 7.0
Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Tao Zhang <tao.zhang@oss.qualcomm.com>, Jie Gan <jie.gan@oss.qualcomm.com>
Description:
(RW) Enable/disable cross trigger synchronization sequence interface.
What: /sys/bus/coresight/devices/<tpda-name>/trig_flag_ts_enable
Date: December 2025
-KernelVersion: 6.20
+KernelVersion: 7.0
Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Tao Zhang <tao.zhang@oss.qualcomm.com>, Jie Gan <jie.gan@oss.qualcomm.com>
Description:
(RW) Enable/disable cross trigger FLAG packet request interface.
What: /sys/bus/coresight/devices/<tpda-name>/trig_freq_enable
Date: December 2025
-KernelVersion: 6.20
+KernelVersion: 7.0
Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Tao Zhang <tao.zhang@oss.qualcomm.com>, Jie Gan <jie.gan@oss.qualcomm.com>
Description:
(RW) Enable/disable cross trigger FREQ packet request interface.
What: /sys/bus/coresight/devices/<tpda-name>/freq_ts_enable
Date: December 2025
-KernelVersion: 6.20
+KernelVersion: 7.0
Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Tao Zhang <tao.zhang@oss.qualcomm.com>, Jie Gan <jie.gan@oss.qualcomm.com>
Description:
(RW) Enable/disable the timestamp for all FREQ packets.
What: /sys/bus/coresight/devices/<tpda-name>/cmbchan_mode
Date: December 2025
-KernelVersion: 6.20
+KernelVersion: 7.0
Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Tao Zhang <tao.zhang@oss.qualcomm.com>, Jie Gan <jie.gan@oss.qualcomm.com>
Description:
(RW) Configure the CMB/MCMB channel mode for all enabled ports.
@@ -36,7 +36,7 @@ Description:
What: /sys/bus/coresight/devices/<tpda-name>/global_flush_req
Date: December 2025
-KernelVersion: 6.20
+KernelVersion: 7.0
Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Tao Zhang <tao.zhang@oss.qualcomm.com>, Jie Gan <jie.gan@oss.qualcomm.com>
Description:
(RW) Set global (all ports) flush request bit. The bit remains set until a
@@ -44,7 +44,7 @@ Description:
What: /sys/bus/coresight/devices/<tpda-name>/syncr_mode
Date: December 2025
-KernelVersion: 6.20
+KernelVersion: 7.0
Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Tao Zhang <tao.zhang@oss.qualcomm.com>, Jie Gan <jie.gan@oss.qualcomm.com>
Description:
(RW) Set mode the of the syncr counter.
@@ -54,7 +54,7 @@ Description:
What: /sys/bus/coresight/devices/<tpda-name>/syncr_count
Date: December 2025
-KernelVersion: 6.20
+KernelVersion: 7.0
Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Tao Zhang <tao.zhang@oss.qualcomm.com>, Jie Gan <jie.gan@oss.qualcomm.com>
Description:
(RW) Set value the of the syncr counter.
@@ -62,7 +62,7 @@ Description:
What: /sys/bus/coresight/devices/<tpda-name>/port_flush_req
Date: December 2025
-KernelVersion: 6.20
+KernelVersion: 7.0
Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Tao Zhang <tao.zhang@oss.qualcomm.com>, Jie Gan <jie.gan@oss.qualcomm.com>
Description:
(RW) Configure the bit i to requests a flush operation of port i on the TPDA.
--
2.39.5 (Apple Git-154)
reply other threads:[~2026-09-12 10:07 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260912100733.86226-1-kmehltretter@gmail.com \
--to=kmehltretter@gmail.com \
--cc=alexander.shishkin@linux.intel.com \
--cc=coresight@lists.linaro.org \
--cc=james.clark@linaro.org \
--cc=jie.gan@oss.qualcomm.com \
--cc=leo.yan@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mike.leach@arm.com \
--cc=suzuki.poulose@arm.com \
--cc=tao.zhang@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox