Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Ben Horgan <ben.horgan@arm.com>
To: ben.horgan@arm.com
Cc: james.morse@arm.com, reinette.chatre@intel.com,
	fenghuay@nvidia.com, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, dave.martin@arm.com,
	andre.przywara@arm.com, Gavin Shan <gshan@redhat.com>
Subject: [PATCH v2 05/12] arm_mpam: Ensure MBWU counters are reset on restore
Date: Thu, 17 Sep 2026 15:56:10 +0100	[thread overview]
Message-ID: <20260917145617.2202986-6-ben.horgan@arm.com> (raw)
In-Reply-To: <20260917145617.2202986-1-ben.horgan@arm.com>

When an MSC becomes inaccessible due to cpu offline CFG_MBWU_CTL is set to
zero in mpam_save_mbwu_state(). This is very likely to mean that the config
will mismatch when restoring and so the monitor will be reset. However, the
state may have been lost and so there are no guarantees. Ensure the reset
happens by setting the reset_on_next_read and remove the unnecessary writes
from mpam_save_mbwu_state().

Fixes: 41e8a14950e1 ("arm_mpam: Track bandwidth counter state for power management")
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Tested-by: Gavin Shan <gshan@redhat.com>
---
Changes since v1:
Use local variable mbwu_state consistently (Shaopeng)
Only access ris->mbwu_state when have the mon_sel_lock
---
 drivers/resctrl/mpam_devices.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/resctrl/mpam_devices.c b/drivers/resctrl/mpam_devices.c
index d39d210574a6..6cba3ef21cc8 100644
--- a/drivers/resctrl/mpam_devices.c
+++ b/drivers/resctrl/mpam_devices.c
@@ -1652,6 +1652,7 @@ static int mpam_restore_mbwu_state(void *_ris)
 	u64 val;
 	struct mon_read mwbu_arg;
 	struct mpam_msc_ris *ris = _ris;
+	struct msmon_mbwu_state *mbwu_state;
 	struct mpam_msc *msc = ris->vmsc->msc;
 	struct mpam_class *class = ris->vmsc->comp->class;
 
@@ -1659,16 +1660,20 @@ static int mpam_restore_mbwu_state(void *_ris)
 		if (WARN_ON_ONCE(!mpam_mon_sel_lock(msc)))
 			return -EIO;
 
-		if (!ris->mbwu_state[i].enabled) {
+		mbwu_state = &ris->mbwu_state[i];
+
+		if (!mbwu_state->enabled) {
 			mpam_mon_sel_unlock(msc);
 			continue;
 		}
 
 		mwbu_arg.ris = ris;
-		mwbu_arg.ctx = &ris->mbwu_state[i].cfg;
+		mwbu_arg.ctx = &mbwu_state->cfg;
 		mwbu_arg.type = mpam_msmon_choose_counter(class);
 		mwbu_arg.val = &val;
 
+		mbwu_state->reset_on_next_read = true;
+
 		mpam_mon_sel_unlock(msc);
 
 		__ris_msmon_read(&mwbu_arg);
@@ -1701,15 +1706,11 @@ static int mpam_save_mbwu_state(void *arg)
 
 		cur_flt = mpam_read_monsel_reg(msc, CFG_MBWU_FLT);
 		cur_ctl = mpam_read_monsel_reg(msc, CFG_MBWU_CTL);
-		mpam_write_monsel_reg(msc, CFG_MBWU_CTL, 0);
 
-		if (mpam_ris_has_mbwu_long_counter(ris)) {
+		if (mpam_ris_has_mbwu_long_counter(ris))
 			val = mpam_msc_read_mbwu_l(msc);
-			mpam_msc_zero_mbwu_l(msc);
-		} else {
+		else
 			val = mpam_read_monsel_reg(msc, MBWU);
-			mpam_write_monsel_reg(msc, MBWU, 0);
-		}
 
 		cfg->mon = i;
 		cfg->pmg = FIELD_GET(MSMON_CFG_x_FLT_PMG, cur_flt);
-- 
2.43.0



  parent reply	other threads:[~2026-09-17 14:56 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-17 14:56 [PATCH v2 00/12] arm_mpam: minor fixes at v7.2 Ben Horgan
2026-09-17 14:56 ` [PATCH v2 01/12] arm_mpam: Move MPAMF_ECR write helpers to allow reuse Ben Horgan
2026-09-22  5:41   ` Gavin Shan
2026-10-02 14:58   ` James Morse
2026-09-17 14:56 ` [PATCH v2 02/12] arm_mpam: Restore the error interrupt enable from mpam_cpu_online() Ben Horgan
2026-09-22  5:42   ` Gavin Shan
2026-10-02 15:00   ` James Morse
2026-09-17 14:56 ` [PATCH v2 03/12] arm_mpam: Set mpam_feat_msmon_mbwu_31counter when there are bandwidth counters Ben Horgan
2026-09-22  5:42   ` Gavin Shan
2026-10-02 15:01   ` James Morse
2026-09-17 14:56 ` [PATCH v2 04/12] arm_mpam: Add missing mon_sel locking in MBWU save and restore Ben Horgan
2026-10-02 15:01   ` James Morse
2026-10-02 15:28     ` Ben Horgan
2026-09-17 14:56 ` Ben Horgan [this message]
2026-09-22  5:43   ` [PATCH v2 05/12] arm_mpam: Ensure MBWU counters are reset on restore Gavin Shan
2026-10-02 15:13   ` James Morse
2026-10-02 15:24     ` Ben Horgan
2026-09-17 14:56 ` [PATCH v2 06/12] arm_mpam: Use __ris_msmon_read() for saving MBWU state Ben Horgan
2026-10-02 15:15   ` James Morse
2026-10-02 15:22     ` Ben Horgan
2026-10-02 16:21       ` James Morse
2026-09-17 14:56 ` [PATCH v2 07/12] arm_mpam: Initialize all of struct mon_read in mpam_restore_mbwu_state() Ben Horgan
2026-10-02 15:15   ` James Morse
2026-09-17 14:56 ` [PATCH v2 08/12] arm_mpam: resctrl: Correct check that existing class is L3 Ben Horgan
2026-09-22  5:43   ` Gavin Shan
2026-10-02 15:15   ` James Morse
2026-09-17 14:56 ` [PATCH v2 09/12] arm_mpam: resctrl: Make read_mon_cdp_safe() self consistent Ben Horgan
2026-09-22  5:44   ` Gavin Shan
2026-10-02 15:17   ` James Morse
2026-09-17 14:56 ` [PATCH v2 10/12] arm_mpam: Don't loop forever if there is the maximum possible amount of PARTIDs Ben Horgan
2026-09-22  5:44   ` Gavin Shan
2026-10-02 15:18   ` James Morse
2026-09-17 14:56 ` [PATCH v2 11/12] arm_mpam: Switch to kvzmalloc_objs() for allocation of component cfg Ben Horgan
2026-09-22  5:45   ` Gavin Shan
2026-10-02 15:18   ` James Morse
2026-09-17 14:56 ` [PATCH v2 12/12] arm_mpam: resctrl: Don't stop early when tearing down a class Ben Horgan
2026-09-22  5:45   ` Gavin Shan
2026-10-07 23:48 ` [PATCH v2 00/12] arm_mpam: minor fixes at v7.2 Shaopeng Tan (Fujitsu)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260917145617.2202986-6-ben.horgan@arm.com \
    --to=ben.horgan@arm.com \
    --cc=andre.przywara@arm.com \
    --cc=dave.martin@arm.com \
    --cc=fenghuay@nvidia.com \
    --cc=gshan@redhat.com \
    --cc=james.morse@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=reinette.chatre@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox