[PATCH RFC v3 03/12] dt-bindings: PCI: nxp,s32g-pcie: Fix SerDes PHY phandle in example

[Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@kernel.org>]

From: "Jan Petrous (OSS)" <jan.petrous@oss.nxp.com>

The example references the SerDes PHY as

  phys = <&serdes0 PHY_TYPE_PCIE 0 0>;

i.e. the SerDes node itself with three PHY cells. That does not match
the SerDes binding: the per-lane child node is the generic PHY
provider and carries '#phy-cells = <0>', while the SerDes node itself
has no '#phy-cells' at all.

Point the example at the PCIe lane child instead, which is also what
the S32G3 board device trees use. The dt-bindings/phy/phy.h include is
dropped along with the now-unused PHY_TYPE_PCIE constant.

The schema itself is unchanged; 'phys: maxItems: 1' already describes
the corrected form.

Signed-off-by: Jan Petrous (OSS) <jan.petrous@oss.nxp.com>
---
 Documentation/devicetree/bindings/pci/nxp,s32g-pcie.yaml | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/nxp,s32g-pcie.yaml b/Documentation/devicetree/bindings/pci/nxp,s32g-pcie.yaml
index 66a050028278..29323e50bd8b 100644
--- a/Documentation/devicetree/bindings/pci/nxp,s32g-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/nxp,s32g-pcie.yaml
@@ -82,7 +82,6 @@ unevaluatedProperties: false
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/phy/phy.h>
 
     bus {
         #address-cells = <2>;
@@ -124,7 +123,7 @@ examples:
                 ranges;
 
                 device_type = "pci";
-                phys = <&serdes0 PHY_TYPE_PCIE 0 0>;
+                phys = <&serdes0_pcie0>;
             };
         };
     };

-- 
2.55.0