Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
To: <Thinh.Nguyen@synopsys.com>, <gregkh@linuxfoundation.org>,
	<michal.simek@amd.com>, <p.zabel@pengutronix.de>
Cc: <linux-usb@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>,
	<stable@vger.kernel.org>
Subject: [PATCH v2 2/3] usb: dwc3: xilinx: re-assert resets on ZynqMP init error paths
Date: Tue, 22 Sep 2026 23:51:24 +0530	[thread overview]
Message-ID: <20260922182125.11067-3-radhey.shyam.pandey@amd.com> (raw)
In-Reply-To: <20260922182125.11067-1-radhey.shyam.pandey@amd.com>

If reset deassert or PHY setup fails partway through
dwc3_xlnx_init_zynqmp(), re-assert any resets that were already
released before unwinding the PHY. Use fall-through error labels so
unwind matches how far init progressed, for both USB2 and USB3 paths.

Save the ZynqMP reset handles in driver private data so later probe
teardown can re-assert released resets.

Fixes: 84770f028fab ("usb: dwc3: Add driver for Xilinx platforms")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-5
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
---
Changes in v2:
- Split out of the combined five patch series; see patch 1.
- Reordered ahead of the platform-data cleanups.
- Added Cc: stable.
- No functional change to the patch itself.

 drivers/usb/dwc3/dwc3-xilinx.c | 49 +++++++++++++++++++++-------------
 1 file changed, 30 insertions(+), 19 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-xilinx.c b/drivers/usb/dwc3/dwc3-xilinx.c
index 8c63e02575f1..d18d3e364381 100644
--- a/drivers/usb/dwc3/dwc3-xilinx.c
+++ b/drivers/usb/dwc3/dwc3-xilinx.c
@@ -48,6 +48,10 @@ struct dwc3_xlnx {
 	void __iomem			*regs;
 	int				(*pltfm_init)(struct dwc3_xlnx *data);
 	struct phy			*usb3_phy;
+	struct reset_control		*usb_crst;
+	struct reset_control		*usb_hibrst;
+	struct reset_control		*usb_apbrst;
+	bool				usb_resets_released;
 };
 
 static void dwc3_xlnx_mask_phy_rst(struct dwc3_xlnx *priv_data, bool mask)
@@ -112,7 +116,6 @@ static int dwc3_xlnx_init_versal(struct dwc3_xlnx *priv_data)
 static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data)
 {
 	struct device		*dev = priv_data->dev;
-	struct reset_control	*crst, *hibrst, *apbrst;
 	struct gpio_desc	*reset_gpio;
 	int			ret = 0;
 
@@ -124,25 +127,25 @@ static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data)
 		goto err;
 	}
 
-	crst = devm_reset_control_get_exclusive(dev, "usb_crst");
-	if (IS_ERR(crst)) {
-		ret = PTR_ERR(crst);
+	priv_data->usb_crst = devm_reset_control_get_exclusive(dev, "usb_crst");
+	if (IS_ERR(priv_data->usb_crst)) {
+		ret = PTR_ERR(priv_data->usb_crst);
 		dev_err_probe(dev, ret,
 			      "failed to get core reset signal\n");
 		goto err;
 	}
 
-	hibrst = devm_reset_control_get_exclusive(dev, "usb_hibrst");
-	if (IS_ERR(hibrst)) {
-		ret = PTR_ERR(hibrst);
+	priv_data->usb_hibrst = devm_reset_control_get_exclusive(dev, "usb_hibrst");
+	if (IS_ERR(priv_data->usb_hibrst)) {
+		ret = PTR_ERR(priv_data->usb_hibrst);
 		dev_err_probe(dev, ret,
 			      "failed to get hibernation reset signal\n");
 		goto err;
 	}
 
-	apbrst = devm_reset_control_get_exclusive(dev, "usb_apbrst");
-	if (IS_ERR(apbrst)) {
-		ret = PTR_ERR(apbrst);
+	priv_data->usb_apbrst = devm_reset_control_get_exclusive(dev, "usb_apbrst");
+	if (IS_ERR(priv_data->usb_apbrst)) {
+		ret = PTR_ERR(priv_data->usb_apbrst);
 		dev_err_probe(dev, ret,
 			      "failed to get APB reset signal\n");
 		goto err;
@@ -156,19 +159,19 @@ static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data)
 	 * absent.
 	 */
 	if (priv_data->usb3_phy) {
-		ret = reset_control_assert(crst);
+		ret = reset_control_assert(priv_data->usb_crst);
 		if (ret < 0) {
 			dev_err(dev, "Failed to assert core reset\n");
 			goto err;
 		}
 
-		ret = reset_control_assert(hibrst);
+		ret = reset_control_assert(priv_data->usb_hibrst);
 		if (ret < 0) {
 			dev_err(dev, "Failed to assert hibernation reset\n");
 			goto err;
 		}
 
-		ret = reset_control_assert(apbrst);
+		ret = reset_control_assert(priv_data->usb_apbrst);
 		if (ret < 0) {
 			dev_err(dev, "Failed to assert APB reset\n");
 			goto err;
@@ -179,7 +182,7 @@ static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data)
 	if (ret < 0)
 		goto err;
 
-	ret = reset_control_deassert(apbrst);
+	ret = reset_control_deassert(priv_data->usb_apbrst);
 	if (ret < 0) {
 		dev_err(dev, "Failed to release APB reset\n");
 		goto err_phy_exit;
@@ -195,21 +198,21 @@ static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data)
 		writel(PIPE_CLK_DESELECT, priv_data->regs + XLNX_USB_FPD_PIPE_CLK);
 	}
 
-	ret = reset_control_deassert(crst);
+	ret = reset_control_deassert(priv_data->usb_crst);
 	if (ret < 0) {
 		dev_err(dev, "Failed to release core reset\n");
-		goto err_phy_exit;
+		goto err_apbrst_assert;
 	}
 
-	ret = reset_control_deassert(hibrst);
+	ret = reset_control_deassert(priv_data->usb_hibrst);
 	if (ret < 0) {
 		dev_err(dev, "Failed to release hibernation reset\n");
-		goto err_phy_exit;
+		goto err_crst_assert;
 	}
 
 	ret = phy_power_on(priv_data->usb3_phy);
 	if (ret < 0)
-		goto err_phy_exit;
+		goto err_hibrst_assert;
 
 	/* ulpi reset via gpio-modepin or gpio-framework driver */
 	reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
@@ -226,10 +229,18 @@ static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data)
 
 	dwc3_xlnx_set_coherency(priv_data, XLNX_USB_TRAFFIC_ROUTE_CONFIG);
 
+	priv_data->usb_resets_released = true;
+
 	return 0;
 
 err_phy_power_off:
 	phy_power_off(priv_data->usb3_phy);
+err_hibrst_assert:
+	reset_control_assert(priv_data->usb_hibrst);
+err_crst_assert:
+	reset_control_assert(priv_data->usb_crst);
+err_apbrst_assert:
+	reset_control_assert(priv_data->usb_apbrst);
 err_phy_exit:
 	phy_exit(priv_data->usb3_phy);
 err:
-- 
2.43.0



  parent reply	other threads:[~2026-09-22 18:22 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-22 18:21 [PATCH v2 0/3] usb: dwc3: xilinx: error path and teardown fixes Radhey Shyam Pandey
2026-09-22 18:21 ` [PATCH v2 1/3] usb: dwc3: xilinx: fix system suspend and resume PHY handling Radhey Shyam Pandey
2026-10-02  2:06   ` Thinh Nguyen
2026-09-22 18:21 ` Radhey Shyam Pandey [this message]
2026-09-23  9:13   ` [PATCH v2 2/3] usb: dwc3: xilinx: re-assert resets on ZynqMP init error paths Philipp Zabel
2026-09-26 12:32     ` Pandey, Radhey Shyam
2026-10-02  2:14   ` Thinh Nguyen
2026-09-22 18:21 ` [PATCH v2 3/3] usb: dwc3: xilinx: unwind ZynqMP platform init on probe failure and remove Radhey Shyam Pandey
2026-10-02  2:15   ` Thinh Nguyen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260922182125.11067-3-radhey.shyam.pandey@amd.com \
    --to=radhey.shyam.pandey@amd.com \
    --cc=Thinh.Nguyen@synopsys.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=michal.simek@amd.com \
    --cc=p.zabel@pengutronix.de \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox