From: Marc Zyngier <maz@kernel.org>
To: kvmarm@lists.linux.dev, linux-arm-kernel@lists.infradead.org
Cc: Steffen Eiden <seiden@linux.ibm.com>,
Joey Gouly <joey.gouly@arm.com>,
Suzuki K Poulose <suzuki.poulose@arm.com>,
Oliver Upton <oupton@kernel.org>,
Zenghui Yu <yuzenghui@huawei.com>,
Fuad Tabba <fuad.tabba@linux.dev>,
Yuchao Zhang <ndaugoing@gmail.com>,
stable@vger.kernel.org
Subject: [PATCH v2 2/7] KVM: arm64: Turn vcpu->arch.pause into a counter
Date: Tue, 29 Sep 2026 10:35:43 +0100 [thread overview]
Message-ID: <20260929093548.3598547-3-maz@kernel.org> (raw)
In-Reply-To: <20260929093548.3598547-1-maz@kernel.org>
We have situations where we can call kvm_arm_halt_guest() without
holding config_lock, which means that halt and resume can overlap in
funny ways when called from separate contexts, and result in situations
where a vcpu is resumed while other parts of KVM assume it is halted.
Consequences are left to the imagination of the reader.
Fix this sorry situation by turning kvm_vcpu_arch::pause into an
atomic counter, which makes the races described above harmless.
Fixes: 3b92830ad41b2 ("KVM: arm/arm64: implement kvm_arm_[halt,resume]_guest")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
---
arch/arm64/include/asm/kvm_host.h | 7 +++----
arch/arm64/kvm/arm.c | 21 ++++++++++++---------
2 files changed, 15 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 27fe0cd5b2d7a..66ea2372f9870 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -889,11 +889,10 @@ struct kvm_vcpu_arch {
/*
* Don't run the guest (internal implementation need).
*
- * Contrary to the flags above, this is set/cleared outside of
- * a vcpu context, and thus cannot be mixed with the flags
- * themselves (or the flag accesses need to be made atomic).
+ * Contrary to the flags above, this is updated outside of
+ * a vcpu context, and thus cannot be mixed with the flags.
*/
- bool pause;
+ atomic_t pause;
/*
* We maintain more than a single set of debug registers to support
diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
index 5f5dd8bead4b9..9a4871cd796bc 100644
--- a/arch/arm64/kvm/arm.c
+++ b/arch/arm64/kvm/arm.c
@@ -561,6 +561,7 @@ int kvm_arch_vcpu_create(struct kvm_vcpu *vcpu)
kvm_arm_pvtime_vcpu_init(&vcpu->arch);
vcpu->arch.hw_mmu = &vcpu->kvm->arch.mmu;
+ atomic_set(&vcpu->arch.pause, 0);
/*
* This vCPU may have been created after mpidr_data was initialized.
@@ -835,6 +836,11 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
return ret;
}
+static bool vcpu_can_run(struct kvm_vcpu *vcpu)
+{
+ return !kvm_arm_vcpu_stopped(vcpu) && !atomic_read(&vcpu->arch.pause);
+}
+
/**
* kvm_arch_vcpu_runnable - determine if the vcpu can be scheduled
* @v: The VCPU pointer
@@ -850,8 +856,7 @@ int kvm_arch_vcpu_runnable(struct kvm_vcpu *v)
(kvm_timer_should_notify_user(v) ||
kvm_pmu_should_notify_user(v)));
- return ((irq_lines || kvm_vgic_vcpu_pending_irq(v))
- && !kvm_arm_vcpu_stopped(v) && !v->arch.pause);
+ return ((irq_lines || kvm_vgic_vcpu_pending_irq(v)) && vcpu_can_run(v));
}
bool kvm_arch_vcpu_in_kernel(struct kvm_vcpu *vcpu)
@@ -1014,7 +1019,7 @@ void kvm_arm_halt_guest(struct kvm *kvm)
struct kvm_vcpu *vcpu;
kvm_for_each_vcpu(i, vcpu, kvm)
- vcpu->arch.pause = true;
+ atomic_inc(&vcpu->arch.pause);
kvm_make_all_cpus_request(kvm, KVM_REQ_SLEEP);
}
@@ -1024,8 +1029,8 @@ void kvm_arm_resume_guest(struct kvm *kvm)
struct kvm_vcpu *vcpu;
kvm_for_each_vcpu(i, vcpu, kvm) {
- vcpu->arch.pause = false;
- __kvm_vcpu_wake_up(vcpu);
+ if (atomic_dec_and_test(&vcpu->arch.pause))
+ __kvm_vcpu_wake_up(vcpu);
}
}
@@ -1033,11 +1038,9 @@ static void kvm_vcpu_sleep(struct kvm_vcpu *vcpu)
{
struct rcuwait *wait = kvm_arch_vcpu_get_wait(vcpu);
- rcuwait_wait_event(wait,
- (!kvm_arm_vcpu_stopped(vcpu)) && (!vcpu->arch.pause),
- TASK_INTERRUPTIBLE);
+ rcuwait_wait_event(wait, vcpu_can_run(vcpu), TASK_INTERRUPTIBLE);
- if (kvm_arm_vcpu_stopped(vcpu) || vcpu->arch.pause) {
+ if (!vcpu_can_run(vcpu)) {
/* Awaken to handle a signal, request we sleep again later. */
kvm_make_request(KVM_REQ_SLEEP, vcpu);
}
--
2.47.3
next prev parent reply other threads:[~2026-09-29 9:36 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-29 9:35 [PATCH v2 0/7] KVM: arm64: vgic-v3: Make LPI disabling robust (and more) Marc Zyngier
2026-09-29 9:35 ` [PATCH v2 1/7] KVM: arm64: Move OUTSIDE_GUEST_MODE publication past context being saved Marc Zyngier
2026-09-29 12:59 ` Fuad Tabba
2026-09-29 14:13 ` Marc Zyngier
2026-09-29 14:46 ` Fuad Tabba
2026-10-02 13:07 ` Will Deacon
2026-09-29 9:35 ` Marc Zyngier [this message]
2026-09-29 13:22 ` [PATCH v2 2/7] KVM: arm64: Turn vcpu->arch.pause into a counter Fuad Tabba
2026-09-29 9:35 ` [PATCH v2 3/7] KVM: arm64: vgic: Allow last_lr_irq to be NULL when LRs are not overflowing Marc Zyngier
2026-09-29 9:35 ` [PATCH v2 4/7] KVM: arm64: vgic: Take a refcount on IRQs referenced by last_lr_irq Marc Zyngier
2026-09-29 9:35 ` [PATCH v2 5/7] KVM: arm64: vgic: Stop the VM when disabling LPIs Marc Zyngier
2026-09-29 9:35 ` [PATCH v2 6/7] KVM: arm64: vgic-its: Fix MOVALL handling of source redistributor Marc Zyngier
2026-09-29 18:14 ` Fuad Tabba
2026-09-29 9:35 ` [PATCH v2 7/7] KVM: arm64: vgic-its: Stop the VM when handling MOVALL Marc Zyngier
2026-09-29 18:45 ` Fuad Tabba
2026-09-29 19:04 ` [PATCH v1 0/2] KVM: arm64: selftests: Cover the ITS MOVALL command Fuad Tabba
2026-09-29 19:04 ` [PATCH v1 1/2] KVM: arm64: selftests: Add a MOVALL command to the ITS library Fuad Tabba
2026-09-29 19:04 ` [PATCH v1 2/2] KVM: arm64: selftests: Add an ITS MOVALL test Fuad Tabba
2026-09-30 12:21 ` Marc Zyngier
2026-09-30 12:34 ` Fuad Tabba
2026-09-29 19:32 ` (subset) [PATCH v2 0/7] KVM: arm64: vgic-v3: Make LPI disabling robust (and more) Oliver Upton
2026-10-08 18:15 ` Fuad Tabba
2026-10-08 20:28 ` Oliver Upton
2026-10-09 6:45 ` Fuad Tabba
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260929093548.3598547-3-maz@kernel.org \
--to=maz@kernel.org \
--cc=fuad.tabba@linux.dev \
--cc=joey.gouly@arm.com \
--cc=kvmarm@lists.linux.dev \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=ndaugoing@gmail.com \
--cc=oupton@kernel.org \
--cc=seiden@linux.ibm.com \
--cc=stable@vger.kernel.org \
--cc=suzuki.poulose@arm.com \
--cc=yuzenghui@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox