From: Sander Speetjens <sander.speetjens@gmail.com>
To: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Florian Fainelli <florian.fainelli@broadcom.com>,
Jonathan Bell <jonathan@raspberrypi.com>,
Stefan Wahren <wahrenst@gmx.net>,
linux-rtc@vger.kernel.org, devicetree@vger.kernel.org,
linux-rpi-kernel@lists.infradead.org,
linux-arm-kernel@lists.infradead.org, sander.speetjens@gmail.com,
pbrobinson@gmail.com, Conor Dooley <conor.dooley@microchip.com>
Subject: [PATCH v9 2/3] dt-bindings: rtc: Add property for Raspberry Pi 5 RTC
Date: Thu, 1 Oct 2026 21:37:02 +0200 [thread overview]
Message-ID: <20261001193703.734323-3-sander.speetjens@gmail.com> (raw)
In-Reply-To: <20261001193703.734323-1-sander.speetjens@gmail.com>
The Raspberry Pi 5 has a built-in RTC that can be battery-backed
via the VBAT pin. When a rechargeable coin cell is used, the
hardware requires a trickle-charge voltage to keep the battery
topped up.
Expose the trickle-voltage-millivolt DT property so the driver can
program the correct charge voltage for board specific configurations with
the attached battery.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sander Speetjens <sander.speetjens@gmail.com>
---
V8 -> V9: No changes
V7 -> V8: No changes
V6 -> V7: No changes
V5 -> V6: No changes
V4 -> V5: As discussed with Conor Dooley, the reff to uint32 is removed
and a PR is made on dt-schema adding millivolt to property-units.yaml
V3 -> V4: Add a reff to uint32
V2 -> V3: Fixed the firmware property naming
V1 -> V2: As discussed with Krzysztof Kozlowski, this property is folded into
the existing raspberrypi,bcm2835-firmware properties.
.../bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
index 983ea80eaec9..dc71fd57834e 100644
--- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
@@ -133,6 +133,11 @@ properties:
required:
- compatible
+ trickle-voltage-millivolt:
+ $ref: /schemas/rtc/rtc.yaml#/properties/trickle-voltage-millivolt
+ minimum: 1300
+ maximum: 5000
+
required:
- compatible
- mboxes
@@ -144,6 +149,7 @@ examples:
firmware {
compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
mboxes = <&mailbox>;
+ trickle-voltage-millivolt = <3300>;
firmware_clocks: clocks {
compatible = "raspberrypi,firmware-clocks";
--
2.55.0
next prev parent reply other threads:[~2026-10-01 19:37 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-01 19:37 [PATCH v9 0/3] Raspberry Pi 5 RTC driver Sander Speetjens
2026-10-01 19:37 ` [PATCH v9 1/3] dt-bindings: rtc: Add missing type to trickle-voltage-millivolt Sander Speetjens
2026-10-02 9:51 ` Krzysztof Kozlowski
2026-10-01 19:37 ` Sander Speetjens [this message]
2026-10-02 9:53 ` [PATCH v9 2/3] dt-bindings: rtc: Add property for Raspberry Pi 5 RTC Krzysztof Kozlowski
2026-10-01 19:37 ` [PATCH v9 3/3] rtc: Add Raspberry Pi 5 RTC driver Sander Speetjens
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261001193703.734323-3-sander.speetjens@gmail.com \
--to=sander.speetjens@gmail.com \
--cc=alexandre.belloni@bootlin.com \
--cc=conor+dt@kernel.org \
--cc=conor.dooley@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=florian.fainelli@broadcom.com \
--cc=jonathan@raspberrypi.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=linux-rtc@vger.kernel.org \
--cc=pbrobinson@gmail.com \
--cc=robh@kernel.org \
--cc=wahrenst@gmx.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox