[PATCH 5/9] gpio: mxc: use devres-managed PM runtime and dev_err_probe

["Peng Fan (OSS)" <peng.fan@oss.nxp.com>]

From: Peng Fan <peng.fan@nxp.com>

Switch pm_runtime_get_noresume() and pm_runtime_enable() to their
devm-managed variants so that pm_runtime_put_noidle() and
pm_runtime_disable() are handled automatically by devres on both
probe failure and device unbind.

Remove the out_bgio goto label and replacing all error paths with
direct returns using dev_err_probe(), which provides better
diagnostic output and handles -EPROBE_DEFER.

Assisted-by: LLM
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/gpio/gpio-mxc.c | 30 ++++++++++--------------------
 1 file changed, 10 insertions(+), 20 deletions(-)

diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index 3c395c82d7d4..73e19d2bf235 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -474,9 +474,9 @@ static int mxc_gpio_probe(struct platform_device *pdev)
 	if (of_device_is_compatible(np, "fsl,imx8qm-gpio"))
 		port->is_imx8qm = true;
 
-	pm_runtime_get_noresume(&pdev->dev);
+	devm_pm_runtime_get_noresume(&pdev->dev);
 	pm_runtime_set_active(&pdev->dev);
-	pm_runtime_enable(&pdev->dev);
+	devm_pm_runtime_enable(&pdev->dev);
 
 	/* disable the interrupt and clear the status */
 	writel(0, port->base + GPIO_IMR);
@@ -502,7 +502,7 @@ static int mxc_gpio_probe(struct platform_device *pdev)
 
 	err = gpio_generic_chip_init(&port->gen_gc, &config);
 	if (err)
-		goto out_bgio;
+		return dev_err_probe(&pdev->dev, err, "Failed to init gpio chip\n");
 
 	port->gen_gc.gc.request = mxc_gpio_request;
 	port->gen_gc.gc.free = mxc_gpio_free;
@@ -518,31 +518,27 @@ static int mxc_gpio_probe(struct platform_device *pdev)
 
 	err = devm_gpiochip_add_data(&pdev->dev, &port->gen_gc.gc, port);
 	if (err)
-		goto out_bgio;
+		return dev_err_probe(&pdev->dev, err, "Failed to add gpiochip data\n");
 
 	irq_base = devm_irq_alloc_descs(&pdev->dev, -1, 0, 32, numa_node_id());
-	if (irq_base < 0) {
-		err = irq_base;
-		goto out_bgio;
-	}
+	if (irq_base < 0)
+		return dev_err_probe(&pdev->dev, irq_base, "Failed to alloc irq desc\n");
 
 	port->domain = irq_domain_create_legacy(dev_fwnode(&pdev->dev), 32, irq_base, 0,
 						&irq_domain_simple_ops, NULL);
-	if (!port->domain) {
-		err = -ENODEV;
-		goto out_bgio;
-	}
+	if (!port->domain)
+		return dev_err_probe(&pdev->dev, -ENODEV, "Failed to create irq domain\n");
 
 	err = devm_add_action_or_reset(&pdev->dev, mxc_gpio_irq_domain_remove, port->domain);
 	if (err)
-		goto out_bgio;
+		return dev_err_probe(&pdev->dev, err, "Failed to add irq_domain_remove\n");
 
 	irq_domain_set_pm_device(port->domain, &pdev->dev);
 
 	/* gpio-mxc can be a generic irq chip */
 	err = mxc_gpio_init_gc(port, irq_base);
 	if (err < 0)
-		goto out_bgio;
+		return dev_err_probe(&pdev->dev, err, "Failed mxc_gpio_init_gc\n");
 
 	list_add_tail(&port->node, &mxc_gpio_ports);
 
@@ -552,12 +548,6 @@ static int mxc_gpio_probe(struct platform_device *pdev)
 	pm_runtime_put_autosuspend(&pdev->dev);
 
 	return 0;
-
-out_bgio:
-	pm_runtime_disable(&pdev->dev);
-	pm_runtime_put_noidle(&pdev->dev);
-	dev_info(&pdev->dev, "%s failed with errno %d\n", __func__, err);
-	return err;
 }
 
 static void mxc_gpio_save_regs(struct mxc_gpio_port *port)

-- 
2.51.0