Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Haotian Zhang <vulab@iscas.ac.cn>
Cc: Mark Brown <broonie@kernel.org>,
	linuxppc-dev@lists.ozlabs.org,  Qiang Zhao <qiang.zhao@nxp.com>,
	Herve Codina <herve.codina@bootlin.com>,
	 linux-kernel@vger.kernel.org, Li Yang <leoyang.li@nxp.com>,
	 linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] soc: fsl: cpm1: tsa: fix wrong clocks released on cleanup
Date: Fri, 9 Oct 2026 08:07:04 +0200	[thread overview]
Message-ID: <20261009-serious-jasmine-bumblebee-10ae3d@quoll> (raw)
In-Reply-To: <20261009053720.3146117-1-vulab@iscas.ac.cn>


On Fri, 09 Oct 2026 13:37:20 +0800, Haotian Zhang wrote:
> tsa_of_parse_tdms() gets and enables tdm->l1tsync_clk and
> tdm->l1tclk_clk in addition to l1rsync_clk and l1rclk_clk, but the
> error cleanup path releases l1rsync_clk/l1rclk_clk again in the
> l1tsync_clk/l1tclk_clk branches. The tsync/tclk clocks are leaked --
> never disabled nor clk_put() -- while rsync/rclk are clk_put() twice,
> underflowing their reference counts. tsa_remove() has the same
> copy-paste bug.
> 
> Release the clock actually held in each cleanup branch.
> 
> Fixes: 1d4ba0b81c1c ("soc: fsl: cpm1: Add support for TSA")
> Assisted-by: DeepSeek-V4.1-Flash
> Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
> ---
>  drivers/soc/fsl/qe/tsa.c | 16 ++++++++--------
>  1 file changed, 8 insertions(+), 8 deletions(-)
> 



Multiple things here:
1. Your team ignored completely previous feedback.

2. You use multiple identities with this email, thus I actually doubt we speak
   with actual person.

3. Finally, same feedback:
You sent multiple independent patches, to multiple independent
subsystems. The amount of these patches clearly suggest this was
AI generated and most likely not tested.

More importantly, you sent all this work without properly organizing
relevant patches into patchsets. This makes reviewing difficult
and might cause multiple reviewers to address the same issue.
Replying to the entire set is impossible and requires handling each
patch independently, instead of applying or discarding the set.
Maintainers also won't see the bigger picture of your work. Quite
worrying.

This is on the verge of hostile patch: bomb us with so many
contributions, we won't be able to handle them in efficient manner,
like responding ONCE to ask you to slow down.  Considering all this
is untested and LLM generated, I have even more doubts whether this
should be considered for review.

Please read kernel documentation BEFORE posting more work. It will
explain you how to identify subsystems, how to organize your work per
subsystem (so a patchset grouping multiple patches with a short cover
letter), how to document usage of LLM and how what you should not do
if this was posted in a good faith.

Best regards,
Krzysztof






      reply	other threads:[~2026-10-09  6:07 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-09  5:37 [PATCH] soc: fsl: cpm1: tsa: fix wrong clocks released on cleanup Haotian Zhang
2026-10-09  6:07 ` Krzysztof Kozlowski [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261009-serious-jasmine-bumblebee-10ae3d@quoll \
    --to=krzk@kernel.org \
    --cc=broonie@kernel.org \
    --cc=herve.codina@bootlin.com \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=qiang.zhao@nxp.com \
    --cc=vulab@iscas.ac.cn \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox