From: Jelly Jia <Jelly.Jia@cixtech.com>
To: vkoul@kernel.org, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, robin.murphy@arm.com
Cc: devicetree@vger.kernel.org, Frank.Li@kernel.org,
cix-kernel-upstream@cixtech.com, dmaengine@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Jelly.Jia@cixtech.com
Subject: [PATCH v3 4/6] dt-bindings: dma: arm,dma-350: Document the CIX Sky1 integration
Date: Mon, 12 Oct 2026 16:41:53 +0800 [thread overview]
Message-ID: <20261012084155.2547480-5-Jelly.Jia@cixtech.com> (raw)
In-Reply-To: <20261012084155.2547480-1-Jelly.Jia@cixtech.com>
The CIX Sky1 DMA-350 integration is the same device with SoC glue around
it, so it is described by the arm,dma-350 node itself with an additional
"cix,sky1-dma350" compatible rather than by a separate wrapper node.
Extend the binding with the CIX compatible and the resources the
integration needs: a clock, which the CIX variant requires, an optional
reset, and an optional reserved memory region used when the controller
cannot reach all of system memory.
v2 -> v3:
- Drop the cix,irq-router property and its conditional: the Sky1
interrupt gate it described is set up by the boot firmware and is not
configured by Linux, so no property describes it.
- The CIX compatible now requires a clock.
Assisted-by: LLM checkpatch sparse dt_binding_check dtbs_check
Signed-off-by: Jelly Jia <Jelly.Jia@cixtech.com>
---
.../devicetree/bindings/dma/arm,dma-350.yaml | 26 ++++++++++++++++++-
1 file changed, 25 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/dma/arm,dma-350.yaml b/Documentation/devicetree/bindings/dma/arm,dma-350.yaml
index 429f682f15d8..4e0f9ffb0039 100644
--- a/Documentation/devicetree/bindings/dma/arm,dma-350.yaml
+++ b/Documentation/devicetree/bindings/dma/arm,dma-350.yaml
@@ -11,10 +11,22 @@ maintainers:
allOf:
- $ref: dma-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: cix,sky1-dma350
+ then:
+ required:
+ - clocks
properties:
compatible:
- const: arm,dma-350
+ oneOf:
+ - const: arm,dma-350
+ - items:
+ - const: cix,sky1-dma350
+ - const: arm,dma-350
reg:
items:
@@ -36,6 +48,18 @@ properties:
const: 1
description: The cell is the trigger input number
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ memory-region:
+ maxItems: 1
+ description:
+ Reserved memory region used for DMA allocations when the controller
+ cannot reach all of system memory.
+
required:
- compatible
- reg
--
2.54.0
next prev parent reply other threads:[~2026-10-12 8:42 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-12 8:41 [PATCH v3 0/6] dmaengine: arm-dma350: Add slave support and CIX Sky1 integration Jelly Jia
2026-10-12 8:41 ` [PATCH v3 1/6] dmaengine: arm-dma350: Fix source trigger bit Jelly Jia
2026-10-12 15:09 ` Frank Li
2026-10-12 8:41 ` [PATCH v3 2/6] dmaengine: arm-dma350: Add slave and cyclic transfer support Jelly Jia
2026-10-12 8:41 ` [PATCH v3 3/6] dmaengine: arm-dma350: Sync the slave command list before starting Jelly Jia
2026-10-12 8:41 ` Jelly Jia [this message]
2026-10-12 19:06 ` [PATCH v3 4/6] dt-bindings: dma: arm,dma-350: Document the CIX Sky1 integration Conor Dooley
2026-10-12 8:41 ` [PATCH v3 5/6] dmaengine: arm-dma350: Support integration clocks, resets and reserved memory Jelly Jia
2026-10-12 8:41 ` [PATCH v3 6/6] arm64: dts: cix: Describe the Sky1 DMA-350 bus integration Jelly Jia
2026-10-12 19:07 ` Conor Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261012084155.2547480-5-Jelly.Jia@cixtech.com \
--to=jelly.jia@cixtech.com \
--cc=Frank.Li@kernel.org \
--cc=cix-kernel-upstream@cixtech.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=robin.murphy@arm.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox