Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Mostafa Saleh <smostafa@google.com>
To: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,  kvmarm@lists.linux.dev,
	iommu@lists.linux.dev
Cc: catalin.marinas@arm.com, will@kernel.org, maz@kernel.org,
	 oliver.upton@linux.dev, joey.gouly@arm.com,
	suzuki.poulose@arm.com,  yuzenghui@huawei.com, joro@8bytes.org,
	jgg@ziepe.ca, mark.rutland@arm.com,  qperret@google.com,
	tabba@google.com, vdonnefort@google.com,  nicolinc@nvidia.com,
	Mostafa Saleh <smostafa@google.com>
Subject: [PATCH v9 18/25] iommu/arm-smmu-v3-kvm: Shadow STEs
Date: Thu, 15 Oct 2026 20:08:49 +0000	[thread overview]
Message-ID: <20261015200903.2735565-19-smostafa@google.com> (raw)
In-Reply-To: <20261015200903.2735565-1-smostafa@google.com>

Shadow the STE when the host sends CFGI_STE: copy the host entry as is
into the hypervisor-owned stream table, which is the one the hardware
uses. For 2-level tables the host L2 table is shared and pinned while
the entry is read, and the hypervisor L2 table is allocated from the
IOMMU pool the first time its L1 slot is used.

STRTAB_BASE and STRTAB_BASE_CFG are no longer passed through: writes are
recorded while the SMMU is disabled and reads return the recorded
values.

The next patch attaches the stage-2 page table to the shadow entry.

Signed-off-by: Mostafa Saleh <smostafa@google.com>
---
 .../arm/arm-smmu-v3/pkvm/arm-smmu-v3-hyp.c    | 124 +++++++++++++++++-
 1 file changed, 118 insertions(+), 6 deletions(-)

diff --git a/drivers/iommu/arm/arm-smmu-v3/pkvm/arm-smmu-v3-hyp.c b/drivers/iommu/arm/arm-smmu-v3/pkvm/arm-smmu-v3-hyp.c
index 0fa98915e00d..132f3a9ba308 100644
--- a/drivers/iommu/arm/arm-smmu-v3/pkvm/arm-smmu-v3-hyp.c
+++ b/drivers/iommu/arm/arm-smmu-v3/pkvm/arm-smmu-v3-hyp.c
@@ -25,6 +25,9 @@ struct hyp_arm_smmu_v3_device *kvm_hyp_arm_smmu_v3_smmus;
 #define strtab_split(smmu)	(FIELD_GET(STRTAB_BASE_CFG_SPLIT, (smmu)->host_ste_cfg))
 #define strtab_l1_size(smmu)	((1UL << (strtab_log2size(smmu) - strtab_split(smmu))) * \
 				 (sizeof(struct arm_smmu_strtab_l1)))
+#define strtab_hyp_base(smmu)	((smmu)->features & ARM_SMMU_FEAT_2_LVL_STRTAB ? \
+				 (u64 *)(smmu)->strtab_cfg.l2.l1tab :\
+				 (u64 *)(smmu)->strtab_cfg.linear.table)
 
 #define for_each_smmu(smmu) \
 	for ((smmu) = kvm_hyp_arm_smmu_v3_smmus; \
@@ -290,6 +293,91 @@ static int smmu_init_cmdq(struct hyp_arm_smmu_v3_device *smmu)
 	return 0;
 }
 
+static int smmu_get_host_l2_ste(struct hyp_arm_smmu_v3_device *smmu, u32 sid,
+				struct arm_smmu_ste *host_ste_out)
+{
+	u64 *host_ste_base = hyp_phys_to_virt(strtab_host_base(smmu));
+	struct arm_smmu_strtab_l1 host_l1_desc;
+	struct arm_smmu_strtab_l2 *l2ptr;
+	phys_addr_t host_l2_tab;
+	int ret, i;
+
+	host_l1_desc.l2ptr = READ_ONCE(host_ste_base[arm_smmu_strtab_l1_idx(sid)]);
+	if (!(le64_to_cpu(host_l1_desc.l2ptr) & STRTAB_L1_DESC_SPAN))
+		return -EINVAL;
+
+	host_l2_tab = le64_to_cpu(host_l1_desc.l2ptr) & STRTAB_L1_DESC_L2PTR_MASK;
+	/* Share and pin the table before accessing it. */
+	ret = smmu_share_pages(host_l2_tab, sizeof(struct arm_smmu_strtab_l2));
+	if (ret)
+		return ret;
+
+	l2ptr = hyp_phys_to_virt(host_l2_tab);
+
+	for (i = 0; i < STRTAB_STE_DWORDS; ++i)
+		host_ste_out->data[i] =
+			READ_ONCE(l2ptr->stes[arm_smmu_strtab_l2_idx(sid)].data[i]);
+
+	WARN_ON(smmu_unshare_pages(host_l2_tab, sizeof(struct arm_smmu_strtab_l2)));
+	return 0;
+}
+
+static int smmu_reshadow_ste(struct hyp_arm_smmu_v3_device *smmu, u32 sid, bool leaf)
+{
+	struct arm_smmu_strtab_cfg *cfg = &smmu->strtab_cfg;
+	struct arm_smmu_ste *hyp_ste_ptr, *host_ste_ptr, host_ste_copy;
+	u64 *hyp_ste_base = strtab_hyp_base(smmu);
+	int ret, i;
+
+	/* Leaf = 0 is not supported, as the kernel driver. */
+	if (!leaf || !is_smmu_enabled(smmu) ||
+	    (sid >= (1UL << strtab_log2size(smmu))))
+		return -EINVAL;
+
+	if (!(smmu->features & ARM_SMMU_FEAT_2_LVL_STRTAB)) {
+		struct arm_smmu_ste *hyp_table = (struct arm_smmu_ste *)hyp_ste_base;
+		u64 *host_ste_base = hyp_phys_to_virt(strtab_host_base(smmu));
+		struct arm_smmu_ste *host_table = (struct arm_smmu_ste *)host_ste_base;
+
+		if (sid >= cfg->linear.num_ents)
+			return -E2BIG;
+
+		hyp_ste_ptr = &hyp_table[sid];
+		host_ste_ptr = &host_table[sid];
+	} else {
+		struct arm_smmu_strtab_l1 *l1tab = (struct arm_smmu_strtab_l1 *)hyp_ste_base;
+		u32 l1_idx = arm_smmu_strtab_l1_idx(sid);
+		struct arm_smmu_strtab_l2 *l2ptr;
+
+		if (l1_idx >= cfg->l2.num_l1_ents)
+			return -E2BIG;
+
+		host_ste_ptr = &host_ste_copy;
+		ret = smmu_get_host_l2_ste(smmu, sid, host_ste_ptr);
+		if (ret)
+			return ret;
+
+		/* No hypervisor entry, first time the L2 is populated. */
+		if (!l1tab[l1_idx].l2ptr) {
+			struct arm_smmu_strtab_l2 *l2table;
+
+			l2table = pkvm_iommu_alloc_pages(get_order(sizeof(*l2table)));
+			if (!l2table)
+				return -ENOMEM;
+			/* Ensure L2 is observed before writing the ptr. */
+			dma_wmb();
+			arm_smmu_write_strtab_l1_desc(&l1tab[l1_idx], hyp_virt_to_phys(l2table));
+		}
+		l2ptr = hyp_phys_to_virt(le64_to_cpu(l1tab[l1_idx].l2ptr) &
+				STRTAB_L1_DESC_L2PTR_MASK);
+		hyp_ste_ptr = &l2ptr->stes[arm_smmu_strtab_l2_idx(sid)];
+	}
+
+	for (i = 0; i < STRTAB_STE_DWORDS; ++i)
+		WRITE_ONCE(hyp_ste_ptr->data[i], host_ste_ptr->data[i]);
+	return 0;
+}
+
 static int smmu_init_strtab(struct hyp_arm_smmu_v3_device *smmu)
 {
 	struct arm_smmu_strtab_cfg *cfg = &smmu->strtab_cfg;
@@ -410,8 +498,24 @@ static bool smmu_filter_command(struct hyp_arm_smmu_v3_device *smmu, u64 *comman
 
 	switch (type) {
 	case CMDQ_OP_CFGI_STE:
-		/* TBD: SHADOW_STE*/
+	{
+		u32 leaf = FIELD_GET(CMDQ_CFGI_1_LEAF, command[1]);
+		u32 sid = FIELD_GET(CMDQ_CFGI_0_SID, command[0]);
+		int ret;
+
+		/*
+		 * If STE update is required, flush the CMDQ and drop the lock as that
+		 * might require to update the host page table and acquire its lock.
+		 */
+		writel(smmu->cmdq.llq.prod, smmu->cmdq.prod_reg);
+		hyp_spin_unlock(&smmu->hw_lock);
+		ret = smmu_reshadow_ste(smmu, sid, leaf);
+		hyp_spin_lock(&smmu->hw_lock);
+		if (ret)
+			return true;
+
 		break;
+	}
 	case CMDQ_OP_CFGI_ALL:
 	{
 		/*
@@ -627,25 +731,33 @@ static bool smmu_dabt_device(struct hyp_arm_smmu_v3_device *smmu,
 			val = smmu->cmdq_host.llq.cons | (CMDQ_CONS_ERR & cons);
 			goto out_update_regs;
 		}
-	/* Passthrough the register access for bisectability, handled later */
 	case ARM_SMMU_STRTAB_BASE:
+		if (len != sizeof(u64))
+			break;
 		if (is_write) {
 			/* Must only be written when SMMU_CR0.SMMUEN == 0. */
 			if (is_smmu_enabled(smmu))
 				break;
 			smmu->host_ste_base = val;
+			goto out_ret;
+		} else {
+			val = smmu->host_ste_base;
+			goto out_update_regs;
 		}
-		mask = read_write;
-		break;
 	case ARM_SMMU_STRTAB_BASE_CFG:
+		if (len != sizeof(u32))
+			break;
 		if (is_write) {
 			/* Must only be written when SMMU_CR0.SMMUEN == 0. */
 			if (is_smmu_enabled(smmu))
 				break;
 			smmu->host_ste_cfg = val;
+			goto out_ret;
+		} else {
+			val = smmu->host_ste_cfg;
+			goto out_update_regs;
 		}
-		mask = read_write;
-		break;
+	/* Passthrough the register access for bisectability, handled later */
 	case ARM_SMMU_GBPA:
 		mask = read_write;
 		break;
-- 
2.56.0.176.g3575e65682-goog



  parent reply	other threads:[~2026-10-15 20:11 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-15 20:08 [PATCH v9 00/25] KVM: arm64: SMMUv3 driver for pKVM (trap and emulate) Mostafa Saleh
2026-10-15 20:08 ` [PATCH v9 01/25] KVM: arm64: Donate MMIO to the hypervisor Mostafa Saleh
2026-10-15 20:08 ` [PATCH v9 02/25] iommu/arm-smmu-v3: Move Queue and STE functions to header Mostafa Saleh
2026-10-15 20:08 ` [PATCH v9 03/25] iommu/arm-smmu-v3: Move IDR parsing to common functions Mostafa Saleh
2026-10-15 20:08 ` [PATCH v9 04/25] iommu/arm-smmu-v3: Move hitless machinery to common code Mostafa Saleh
2026-10-15 20:08 ` [PATCH v9 05/25] iommu/arm-smmu-v3: Move RangeInval " Mostafa Saleh
2026-10-15 20:08 ` [PATCH v9 06/25] KVM: arm64: iommu: Introduce IOMMU driver infrastructure Mostafa Saleh
2026-10-15 20:08 ` [PATCH v9 07/25] KVM: arm64: iommu: Shadow host stage-2 page table Mostafa Saleh
2026-10-15 20:08 ` [PATCH v9 08/25] KVM: arm64: iommu: Add memory pool Mostafa Saleh
2026-10-15 20:08 ` [PATCH v9 09/25] KVM: arm64: iommu: Support DABT for IOMMU Mostafa Saleh
2026-10-15 20:08 ` [PATCH v9 10/25] iommu/arm-smmu-v3-kvm: Add SMMUv3 driver Mostafa Saleh
2026-10-15 20:08 ` [PATCH v9 11/25] iommu/arm-smmu-v3-kvm: Add the kernel driver Mostafa Saleh
2026-10-15 20:08 ` [PATCH v9 12/25] iommu/arm-smmu-v3-kvm: Probe SMMU HW Mostafa Saleh
2026-10-15 20:08 ` [PATCH v9 13/25] iommu/arm-smmu-v3-kvm: Add MMIO emulation Mostafa Saleh
2026-10-15 20:08 ` [PATCH v9 14/25] iommu/arm-smmu-v3-kvm: Shadow the command queue Mostafa Saleh
2026-10-15 20:08 ` [PATCH v9 15/25] iommu/arm-smmu-v3-kvm: Add CMDQ functions Mostafa Saleh
2026-10-15 20:08 ` [PATCH v9 16/25] iommu/arm-smmu-v3-kvm: Emulate CMDQ for host Mostafa Saleh
2026-10-15 20:08 ` [PATCH v9 17/25] iommu/arm-smmu-v3-kvm: Shadow stream table Mostafa Saleh
2026-10-15 20:08 ` Mostafa Saleh [this message]
2026-10-15 20:08 ` [PATCH v9 19/25] iommu/arm-smmu-v3-kvm: Share other queues Mostafa Saleh
2026-10-15 20:08 ` [PATCH v9 20/25] iommu/arm-smmu-v3-kvm: Emulate GBPA Mostafa Saleh
2026-10-15 20:08 ` [PATCH v9 21/25] iommu/io-pgtable-arm: Support io-pgtable-arm in the hypervisor Mostafa Saleh
2026-10-15 20:08 ` [PATCH v9 22/25] iommu/arm-smmu-v3-kvm: Shadow the CPU stage-2 page table Mostafa Saleh
2026-10-15 20:08 ` [PATCH v9 23/25] iommu/arm-smmu-v3-kvm: Invalidate the SMMU TLBs Mostafa Saleh
2026-10-15 20:08 ` [PATCH v9 24/25] iommu/arm-smmu-v3-kvm: Enable nesting Mostafa Saleh
2026-10-15 20:08 ` [PATCH v9 25/25] KVM: arm64: Add documentation for pKVM DMA isolation Mostafa Saleh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261015200903.2735565-19-smostafa@google.com \
    --to=smostafa@google.com \
    --cc=catalin.marinas@arm.com \
    --cc=iommu@lists.linux.dev \
    --cc=jgg@ziepe.ca \
    --cc=joey.gouly@arm.com \
    --cc=joro@8bytes.org \
    --cc=kvmarm@lists.linux.dev \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=maz@kernel.org \
    --cc=nicolinc@nvidia.com \
    --cc=oliver.upton@linux.dev \
    --cc=qperret@google.com \
    --cc=suzuki.poulose@arm.com \
    --cc=tabba@google.com \
    --cc=vdonnefort@google.com \
    --cc=will@kernel.org \
    --cc=yuzenghui@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox