From: Arash Golgol <arash.golgol@gmail.com>
To: linux-media@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev
Cc: yong.deng@magewell.com, paulk@sys-base.io, mchehab@kernel.org,
wens@kernel.org, jernej.skrabec@gmail.com, samuel@sholland.org,
laurent.pinchart@ideasonboard.com,
Arash Golgol <arash.golgol@gmail.com>
Subject: [PATCH v1 2/3] media: sun6i-csi: capture: Add enum_framesizes support
Date: Fri, 16 Oct 2026 15:08:45 +0330 [thread overview]
Message-ID: <20261016113846.8602-3-arash.golgol@gmail.com> (raw)
In-Reply-To: <20261016113846.8602-1-arash.golgol@gmail.com>
Implement VIDIOC_ENUM_FRAMESIZES as a stepwise range from the minimum
and maximum sizes supported by the hardware. The step follows the
alignment enforced by try_fmt: 16 for NV12_16L16 and 2 otherwise.
Assisted-by: Claude:claude-sonnet-5-5
Signed-off-by: Arash Golgol <arash.golgol@gmail.com>
---
.../sunxi/sun6i-csi/sun6i_csi_capture.c | 25 +++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi_capture.c b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi_capture.c
index f55edfd0b174..3adb10b62857 100644
--- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi_capture.c
+++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi_capture.c
@@ -746,6 +746,30 @@ static int sun6i_csi_capture_enum_fmt(struct file *file, void *priv,
return 0;
}
+static int sun6i_csi_capture_enum_framesizes(struct file *file, void *priv,
+ struct v4l2_frmsizeenum *fsize)
+{
+ unsigned int step;
+
+ if (fsize->index != 0)
+ return -EINVAL;
+
+ if (!sun6i_csi_capture_format_find(fsize->pixel_format))
+ return -EINVAL;
+
+ step = 1U << sun6i_csi_capture_format_align(fsize->pixel_format);
+
+ fsize->type = V4L2_FRMSIZE_TYPE_STEPWISE;
+ fsize->stepwise.min_width = SUN6I_CSI_CAPTURE_WIDTH_MIN;
+ fsize->stepwise.max_width = SUN6I_CSI_CAPTURE_WIDTH_MAX;
+ fsize->stepwise.step_width = step;
+ fsize->stepwise.min_height = SUN6I_CSI_CAPTURE_HEIGHT_MIN;
+ fsize->stepwise.max_height = SUN6I_CSI_CAPTURE_HEIGHT_MAX;
+ fsize->stepwise.step_height = step;
+
+ return 0;
+}
+
static int sun6i_csi_capture_g_fmt(struct file *file, void *priv,
struct v4l2_format *format)
{
@@ -813,6 +837,7 @@ static const struct v4l2_ioctl_ops sun6i_csi_capture_ioctl_ops = {
.vidioc_querycap = sun6i_csi_capture_querycap,
.vidioc_enum_fmt_vid_cap = sun6i_csi_capture_enum_fmt,
+ .vidioc_enum_framesizes = sun6i_csi_capture_enum_framesizes,
.vidioc_g_fmt_vid_cap = sun6i_csi_capture_g_fmt,
.vidioc_s_fmt_vid_cap = sun6i_csi_capture_s_fmt,
.vidioc_try_fmt_vid_cap = sun6i_csi_capture_try_fmt,
--
2.34.1
next prev parent reply other threads:[~2026-10-16 11:38 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-16 11:38 [PATCH v1 0/3] media: sun6i-csi: Improve capture and bridge Arash Golgol
2026-10-16 11:38 ` [PATCH v1 1/3] media: sun6i-csi: capture: Align size to 16 for NV12_16L16 Arash Golgol
2026-10-16 11:38 ` Arash Golgol [this message]
2026-10-16 11:38 ` [PATCH v1 3/3] media: sun6i-csi: bridge: Remove duplicate mbus format entries Arash Golgol
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261016113846.8602-3-arash.golgol@gmail.com \
--to=arash.golgol@gmail.com \
--cc=jernej.skrabec@gmail.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=mchehab@kernel.org \
--cc=paulk@sys-base.io \
--cc=samuel@sholland.org \
--cc=wens@kernel.org \
--cc=yong.deng@magewell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).