From: Arnd Bergmann <arnd@kernel.org>
To: "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Jiri Slaby" <jirislaby@kernel.org>,
"Andy Shevchenko" <andriy.shevchenko@linux.intel.com>,
"Uwe Kleine-König (The Capable Hub)"
<u.kleine-koenig@baylibre.com>,
"Hugo Villeneuve" <hvilleneuve@dimonoff.com>
Cc: Arnd Bergmann <arnd@arndb.de>,
linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, imx@lists.linux.dev
Subject: [PATCH 1/2] tty: serial: remove hub6 multiport support
Date: Fri, 16 Oct 2026 14:59:47 +0200 [thread overview]
Message-ID: <20261016130328.1037616-1-arnd@kernel.org> (raw)
From: Arnd Bergmann <arnd@arndb.de>
hub6 support was added in linux-0.99 and the hardware was already old at
the time, being discontinued in 1990. The code for it has always been a
mess since it adds another dimension to the I/O addressing in the driver
that has leaked into many individual files.
Hugo and Uwe have attempted several times this year alone to isolate
the hub6 handling into the 8250_hub6.c file, but I feel that none of
this has been a real improvement over the original standalone loadable
module support.
Any machine that would have used this ISA card in practice is likely
30 to 40 years old, and with i486 support now removed, it is clearly
safe to just kill this all off. The only bit that has to remain
is the ioctl interface, to ensure the serial_struct field is always
zero.
Link: https://mirrors.nycbug.org/pub/The_Unix_Archive/Unix_Usenet/comp.unix.sysv386/1990-December/007174.html
Fixes: a300273c458c ("serial: 8250: hub6: Add cleanup code")
Fixes: c526404a4a92 ("serial: 8250: Fix corner case for port matching")
Fixes: 7ab80d1e7243 ("serial: 8250: fix compile error with hub6_match_port() when compiled as a module")
Fixes: da7b5fd4e17f ("serial: 8250_hub6: add missing include for hub6_match_port()")
Fixes: 3d406299d882 ("serial: 8250_hub6: add hub6_match_port()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/tty/serial/8250/8250.h | 15 -------
drivers/tty/serial/8250/8250_core.c | 2 -
drivers/tty/serial/8250/8250_hub6.c | 60 -------------------------
drivers/tty/serial/8250/8250_platform.c | 11 +----
drivers/tty/serial/8250/8250_port.c | 23 ----------
drivers/tty/serial/8250/Kconfig | 15 ++-----
drivers/tty/serial/8250/Makefile | 1 -
drivers/tty/serial/atmel_serial.c | 2 -
drivers/tty/serial/fsl_lpuart.c | 2 -
drivers/tty/serial/imx.c | 2 -
drivers/tty/serial/mpc52xx_uart.c | 3 +-
drivers/tty/serial/sa1100.c | 2 -
drivers/tty/serial/serial_core.c | 18 +++-----
drivers/tty/serial/sunsu.c | 9 ----
drivers/tty/serial/xilinx_uartps.c | 2 -
include/linux/serial_8250.h | 2 -
include/linux/serial_core.h | 2 -
17 files changed, 12 insertions(+), 159 deletions(-)
delete mode 100644 drivers/tty/serial/8250/8250_hub6.c
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 21ed9c41b751..75afeb8c0cef 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -323,14 +323,6 @@ static inline int serial8250_pnp_init(void) { return 0; }
static inline void serial8250_pnp_exit(void) { }
#endif
-#ifdef CONFIG_SERIAL_8250_HUB6
-int serial8250_hub6_init(void);
-void serial8250_hub6_exit(void);
-#else
-static inline int serial8250_hub6_init(void) { return 0; }
-static inline void serial8250_hub6_exit(void) { }
-#endif
-
#ifdef CONFIG_SERIAL_8250_RSA
void univ8250_rsa_support(struct uart_ops *ops, const struct uart_ops *core_ops);
void rsa_enable(struct uart_8250_port *up);
@@ -351,13 +343,6 @@ int fintek_8250_probe(struct uart_8250_port *uart);
static inline int fintek_8250_probe(struct uart_8250_port *uart) { return 0; }
#endif
-#if IS_ENABLED(CONFIG_SERIAL_8250_HUB6)
-bool hub6_match_port(const struct uart_port *port1, const struct uart_port *port2);
-#else
-static inline bool hub6_match_port(const struct uart_port *port1, const struct uart_port *port2)
-{ return false; }
-#endif
-
#ifdef CONFIG_ARCH_OMAP1
#include <linux/soc/ti/omap1-soc.h>
static inline int is_omap1_8250(struct uart_8250_port *pt)
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 42319843cb5b..96c99f0ae683 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -686,8 +686,6 @@ static bool serial8250_match_port(const struct uart_port *port1,
return false;
else if (port1->iotype == UPIO_PORT)
return port1->iobase == port2->iobase;
- else if (port1->iotype == UPIO_HUB6)
- return hub6_match_port(port1, port2);
else if (uart_iotype_mmio(port1->iotype))
return port1->mapbase == port2->mapbase;
else
diff --git a/drivers/tty/serial/8250/8250_hub6.c b/drivers/tty/serial/8250/8250_hub6.c
deleted file mode 100644
index 848d9723ac56..000000000000
--- a/drivers/tty/serial/8250/8250_hub6.c
+++ /dev/null
@@ -1,60 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2005 Russell King.
- * Data taken from include/asm-i386/serial.h
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/serial_8250.h>
-
-#include "8250.h"
-
-#define HUB6(card, port) \
- { \
- .iobase = 0x302, \
- .irq = 3, \
- .uartclk = 1843200, \
- .iotype = UPIO_HUB6, \
- .flags = UPF_BOOT_AUTOCONF, \
- .hub6 = (card) << 6 | (port) << 3 | 1, \
- }
-
-static struct plat_serial8250_port hub6_data[] = {
- HUB6(0, 0),
- HUB6(0, 1),
- HUB6(0, 2),
- HUB6(0, 3),
- HUB6(0, 4),
- HUB6(0, 5),
- HUB6(1, 0),
- HUB6(1, 1),
- HUB6(1, 2),
- HUB6(1, 3),
- HUB6(1, 4),
- HUB6(1, 5),
- { },
-};
-
-static struct platform_device hub6_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_HUB6,
- .dev = {
- .platform_data = hub6_data,
- },
-};
-
-bool hub6_match_port(const struct uart_port *port1, const struct uart_port *port2)
-{
- return port1->iobase == port2->iobase && port1->hub6 == port2->hub6;
-}
-EXPORT_SYMBOL_GPL(hub6_match_port);
-
-int __init serial8250_hub6_init(void)
-{
- return platform_device_register(&hub6_device);
-}
-
-void serial8250_hub6_exit(void)
-{
- platform_device_unregister(&hub6_device);
-}
diff --git a/drivers/tty/serial/8250/8250_platform.c b/drivers/tty/serial/8250/8250_platform.c
index 7ce7ad295fae..8aa769085bfa 100644
--- a/drivers/tty/serial/8250/8250_platform.c
+++ b/drivers/tty/serial/8250/8250_platform.c
@@ -86,7 +86,6 @@ static void __init __serial8250_isa_init_ports(void)
port->irqflags = 0;
port->uartclk = old_serial_port[i].baud_base * 16;
port->flags = old_serial_port[i].flags;
- port->hub6 = 0;
port->membase = old_serial_port[i].iomem_base;
port->iotype = old_serial_port[i].io_type;
port->regshift = old_serial_port[i].iomem_reg_shift;
@@ -169,7 +168,6 @@ static int serial8250_probe_platform(struct platform_device *dev, struct plat_se
uart->port.flags = p->flags;
uart->port.mapbase = p->mapbase;
uart->port.mapsize = p->mapsize;
- uart->port.hub6 = p->hub6;
uart->port.has_sysrq = p->has_sysrq;
uart->port.private_data = p->private_data;
uart->port.type = p->type;
@@ -317,14 +315,10 @@ static int __init serial8250_init(void)
if (ret)
goto unreg_uart_drv;
- ret = serial8250_hub6_init();
- if (ret)
- goto unreg_pnp;
-
serial8250_isa_devs = platform_device_alloc("serial8250", PLAT8250_DEV_LEGACY);
if (!serial8250_isa_devs) {
ret = -ENOMEM;
- goto unreg_hub6;
+ goto unreg_pnp;
}
ret = platform_device_add(serial8250_isa_devs);
@@ -340,8 +334,6 @@ static int __init serial8250_init(void)
platform_device_del(serial8250_isa_devs);
put_dev:
platform_device_put(serial8250_isa_devs);
-unreg_hub6:
- serial8250_hub6_exit();
unreg_pnp:
serial8250_pnp_exit();
unreg_uart_drv:
@@ -369,7 +361,6 @@ static void __exit serial8250_exit(void)
platform_driver_unregister(&serial8250_isa_driver);
platform_device_unregister(isa_dev);
- serial8250_hub6_exit();
serial8250_pnp_exit();
#ifdef CONFIG_SPARC
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 36b2b0a2c05c..3593e7209879 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -354,22 +354,6 @@ static void default_serial_dl_write(struct uart_8250_port *up, u32 value)
serial_out(up, UART_DLM, value >> 8 & 0xff);
}
-#ifdef CONFIG_HAS_IOPORT
-static u32 hub6_serial_in(struct uart_port *p, unsigned int offset)
-{
- offset = offset << p->regshift;
- outb(p->hub6 - 1 + offset, p->iobase);
- return inb(p->iobase + 1);
-}
-
-static void hub6_serial_out(struct uart_port *p, unsigned int offset, u32 value)
-{
- offset = offset << p->regshift;
- outb(p->hub6 - 1 + offset, p->iobase);
- outb(value, p->iobase + 1);
-}
-#endif /* CONFIG_HAS_IOPORT */
-
static u32 mem_serial_in(struct uart_port *p, unsigned int offset)
{
offset = offset << p->regshift;
@@ -450,13 +434,6 @@ static void set_io_from_upio(struct uart_port *p)
up->dl_write = default_serial_dl_write;
switch (p->iotype) {
-#ifdef CONFIG_HAS_IOPORT
- case UPIO_HUB6:
- p->serial_in = hub6_serial_in;
- p->serial_out = hub6_serial_out;
- break;
-#endif
-
case UPIO_MEM:
p->serial_in = mem_serial_in;
p->serial_out = mem_serial_out;
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 82e761b8298a..9917b7e1bb26 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -208,9 +208,9 @@ config SERIAL_8250_EXTENDED
depends on SERIAL_8250
help
If you wish to use any non-standard features of the standard "dumb"
- driver, say Y here. This includes HUB6 support, shared serial
- interrupts, special multiport support, support for more than the
- four COM 1/2/3/4 boards, etc.
+ driver, say Y here. This includes shared serial interrupts, special
+ multiport support, support for more than the four COM 1/2/3/4 boards,
+ etc.
Note that the answer to this question won't directly affect the
kernel: saying N will just cause the configurator to skip all
@@ -303,15 +303,6 @@ config SERIAL_8250_EXAR_ST16C554
To compile this driver as a module, choose M here: the module
will be called 8250_exar_st16c554.
-config SERIAL_8250_HUB6
- bool "Support Hub6 cards"
- depends on SERIAL_8250_MANY_PORTS && ISA
- help
- Say Y here if you have a HUB6 serial board.
-
- To compile this driver as a module, choose M here: the module
- will be called 8250_hub6.
-
config SERIAL_8250_PCI1XXXX
tristate "Microchip 8250 based serial port"
depends on SERIAL_8250 && PCI
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index 5ff2ba414e13..d241ce486953 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -7,7 +7,6 @@ obj-$(CONFIG_SERIAL_8250) += 8250.o
8250-y := 8250_core.o
8250-y += 8250_platform.o
8250-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o
-8250-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
obj-$(CONFIG_SERIAL_8250) += 8250_base.o
8250_base-y := 8250_port.o
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index c3880259e3bc..9c40ccee0c82 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -2448,8 +2448,6 @@ static int atmel_verify_port(struct uart_port *port, struct serial_struct *ser)
ret = -EINVAL;
if (port->iobase != ser->port)
ret = -EINVAL;
- if (ser->hub6 != 0)
- ret = -EINVAL;
return ret;
}
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index c8575c965203..6e1248840022 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -2432,8 +2432,6 @@ static int lpuart_verify_port(struct uart_port *port, struct serial_struct *ser)
ret = -EINVAL;
if (port->iobase != ser->port)
ret = -EINVAL;
- if (ser->hub6 != 0)
- ret = -EINVAL;
return ret;
}
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 986fefb45c63..d89be62e3852 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1936,8 +1936,6 @@ imx_uart_verify_port(struct uart_port *port, struct serial_struct *ser)
ret = -EINVAL;
if (port->iobase != ser->port)
ret = -EINVAL;
- if (ser->hub6 != 0)
- ret = -EINVAL;
return ret;
}
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index 472ec39caf27..240009333fb5 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -1339,8 +1339,7 @@ mpc52xx_uart_verify_port(struct uart_port *port, struct serial_struct *ser)
if ((ser->irq != port->irq) ||
(ser->io_type != UPIO_MEM) ||
(ser->baud_base != port->uartclk) ||
- (ser->iomem_base != (void *)port->mapbase) ||
- (ser->hub6 != 0))
+ (ser->iomem_base != (void *)port->mapbase))
return -EINVAL;
return 0;
diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c
index 72b1bb76415c..ee5f3960d1e4 100644
--- a/drivers/tty/serial/sa1100.c
+++ b/drivers/tty/serial/sa1100.c
@@ -556,8 +556,6 @@ sa1100_verify_port(struct uart_port *port, struct serial_struct *ser)
ret = -EINVAL;
if (sport->port.iobase != ser->port)
ret = -EINVAL;
- if (ser->hub6 != 0)
- ret = -EINVAL;
return ret;
}
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 9eea8d1a0e8a..15d8c3ed6edc 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -812,7 +812,7 @@ static int uart_get_info(struct tty_port *port, struct serial_struct *retinfo)
ASYNC_CLOSING_WAIT_NONE :
jiffies_to_msecs(port->closing_wait) / 10;
retinfo->custom_divisor = uport->custom_divisor;
- retinfo->hub6 = uport->hub6;
+ retinfo->hub6 = 0;
retinfo->io_type = uport->iotype;
retinfo->iomem_reg_shift = uport->regshift;
retinfo->iomem_base = (void *)(unsigned long)uport->mapbase;
@@ -834,13 +834,12 @@ static int uart_change_port(struct uart_port *uport,
unsigned long new_port)
{
unsigned long old_iobase, old_mapbase;
- unsigned int old_type, old_iotype, old_hub6, old_shift;
+ unsigned int old_type, old_iotype, old_shift;
int retval;
old_iobase = uport->iobase;
old_mapbase = uport->mapbase;
old_type = uport->type;
- old_hub6 = uport->hub6;
old_iotype = uport->iotype;
old_shift = uport->regshift;
@@ -849,7 +848,6 @@ static int uart_change_port(struct uart_port *uport,
uport->iobase = new_port;
uport->type = new_info->type;
- uport->hub6 = new_info->hub6;
uport->iotype = new_info->io_type;
uport->regshift = new_info->iomem_reg_shift;
uport->mapbase = (unsigned long)new_info->iomem_base;
@@ -867,7 +865,6 @@ static int uart_change_port(struct uart_port *uport,
*/
uport->iobase = old_iobase;
uport->type = old_type;
- uport->hub6 = old_hub6;
uport->iotype = old_iotype;
uport->regshift = old_shift;
uport->mapbase = old_mapbase;
@@ -924,7 +921,6 @@ static int uart_set_info(struct tty_struct *tty, struct tty_port *port,
change_port = !(uport->flags & UPF_FIXED_PORT)
&& (new_port != uport->iobase ||
(unsigned long)new_info->iomem_base != uport->mapbase ||
- new_info->hub6 != uport->hub6 ||
new_info->io_type != uport->iotype ||
new_info->iomem_reg_shift != uport->regshift ||
new_info->type != uport->type);
@@ -954,6 +950,10 @@ static int uart_set_info(struct tty_struct *tty, struct tty_port *port,
goto check_and_exit;
}
+ /* hub6 is no longer support */
+ if (new_info->hub6 != 0)
+ return -EINVAL;
+
if (change_irq || change_port) {
retval = security_locked_down(LOCKDOWN_TIOCSSERIAL);
if (retval)
@@ -2010,7 +2010,6 @@ bool uart_iotype_io(enum uart_iotype iotype)
{
switch (iotype) {
case UPIO_PORT:
- case UPIO_HUB6:
return true;
default:
return false;
@@ -2538,10 +2537,7 @@ void uart_get_ioinfos(struct uart_port *port, char *buf, size_t size)
if (uart_iotype_mmio(port->iotype)) {
scnprintf(buf, size, " MMIO%s:%pa", uart_get_mmio_width(port), &port->mapbase);
} else if (uart_iotype_io(port->iotype)) {
- if (port->iotype == UPIO_PORT)
- scnprintf(buf, size, " I/O:0x%lx", port->iobase);
- else if (port->iotype == UPIO_HUB6)
- scnprintf(buf, size, " I/O:0x%lx, offset 0x%x", port->iobase, port->hub6);
+ scnprintf(buf, size, " I/O:0x%lx", port->iobase);
}
}
EXPORT_SYMBOL(uart_get_ioinfos);
diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index 4ff3e5c41dab..f43b802add12 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -106,10 +106,6 @@ static unsigned int serial_in(struct uart_sunsu_port *up, int offset)
offset <<= up->port.regshift;
switch (up->port.iotype) {
- case UPIO_HUB6:
- outb(up->port.hub6 - 1 + offset, up->port.iobase);
- return inb(up->port.iobase + 1);
-
case UPIO_MEM:
return readb(up->port.membase + offset);
@@ -136,11 +132,6 @@ static void serial_out(struct uart_sunsu_port *up, int offset, int value)
offset <<= up->port.regshift;
switch (up->port.iotype) {
- case UPIO_HUB6:
- outb(up->port.hub6 - 1 + offset, up->port.iobase);
- outb(value, up->port.iobase + 1);
- break;
-
case UPIO_MEM:
writeb(value, up->port.membase + offset);
break;
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index a072b75dbaf2..4066cc99fe1a 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1079,8 +1079,6 @@ static int cdns_uart_verify_port(struct uart_port *port,
return -EINVAL;
if (port->iobase != ser->port)
return -EINVAL;
- if (ser->hub6 != 0)
- return -EINVAL;
return 0;
}
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index d91c0477be9d..d55bce4d4709 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -41,7 +41,6 @@ struct plat_serial8250_port {
void *private_data;
unsigned char regshift; /* register shift */
unsigned char iotype; /* UPIO_* */
- unsigned char hub6;
unsigned char has_sysrq; /* supports magic SysRq */
unsigned int type; /* If UPF_FIXED_TYPE */
upf_t flags; /* UPF_* flags */
@@ -75,7 +74,6 @@ enum {
PLAT8250_DEV_ACCENT,
PLAT8250_DEV_BOCA,
PLAT8250_DEV_EXAR_ST16C554,
- PLAT8250_DEV_HUB6,
PLAT8250_DEV_AU1X00,
PLAT8250_DEV_SM501,
};
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 4eeb8253752a..ca8d009e5c36 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -430,7 +430,6 @@ typedef unsigned int __bitwise upstat_t;
enum uart_iotype {
UPIO_UNKNOWN = -1,
UPIO_PORT = SERIAL_IO_PORT, /* 8b I/O port access */
- UPIO_HUB6 = SERIAL_IO_HUB6, /* Hub6 ISA card */
UPIO_MEM = SERIAL_IO_MEM, /* driver-specific */
UPIO_MEM32 = SERIAL_IO_MEM32, /* 32b little endian */
UPIO_AU = SERIAL_IO_AU, /* Au1x00 and RT288x type IO */
@@ -590,7 +589,6 @@ struct uart_port {
unsigned char has_sysrq;
unsigned char sysrq_seq; /* index in sysrq_toggle_seq */
- unsigned char hub6; /* this should be in the 8250 driver */
unsigned char suspended;
unsigned char console_reinit;
const char *name; /* port name */
--
2.53.0
next reply other threads:[~2026-10-16 13:03 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-16 12:59 Arnd Bergmann [this message]
2026-10-16 12:59 ` [PATCH 2/2] [v2] serial: 8250: remove obsolete and broken PORT_RSA support Arnd Bergmann
2026-10-16 13:14 ` Arnd Bergmann
2026-10-16 13:28 ` [PATCH 1/2] tty: serial: remove hub6 multiport support Andy Shevchenko
2026-10-16 14:41 ` Arnd Bergmann
2026-10-16 13:32 ` Andy Shevchenko
2026-10-16 14:10 ` Hugo Villeneuve
2026-10-16 15:56 ` Hugo Villeneuve
2026-10-16 16:16 ` Arnd Bergmann
2026-10-16 17:17 ` Hugo Villeneuve
2026-10-16 16:48 ` Hugo Villeneuve
2026-10-16 17:12 ` Arnd Bergmann
2026-10-16 17:16 ` Hugo Villeneuve
2026-10-16 18:28 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261016130328.1037616-1-arnd@kernel.org \
--to=arnd@kernel.org \
--cc=andriy.shevchenko@linux.intel.com \
--cc=arnd@arndb.de \
--cc=gregkh@linuxfoundation.org \
--cc=hvilleneuve@dimonoff.com \
--cc=imx@lists.linux.dev \
--cc=jirislaby@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=u.kleine-koenig@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox