Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Maxime Chevallier <maxime.chevallier@bootlin.com>
To: Andrew Lunn <andrew+netdev@lunn.ch>,
	Jakub Kicinski <kuba@kernel.org>,
	davem@davemloft.net, Eric Dumazet <edumazet@google.com>,
	Paolo Abeni <pabeni@redhat.com>, Simon Horman <horms@kernel.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Russell King <linux@armlinux.org.uk>,
	Lorenzo Bianconi <lorenzo.bianconi@oss.qualcomm.com>,
	Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Cc: "Maxime Chevallier" <maxime.chevallier@bootlin.com>,
	thomas.petazzoni@bootlin.com,
	"Alexis Lothoré" <alexis.lothore@bootlin.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH net] net: stmmac: Clear DMA errors for multi-channel interrupts
Date: Fri, 30 Oct 2026 11:22:49 +0100	[thread overview]
Message-ID: <20261030102251.208929-1-maxime.chevallier@bootlin.com> (raw)

The Multi-MSI interrupt handler doesn't clear the DMA error interrupts,
and this leads to interrupt storms when one of these interrupts starts
firing :

 - The RBU (rx buff unav) which triggers under high traffic load

   This triggers easily with iperf3 and small udp packets, and shows
   when running the netpoll kselftest

 - The RPS (rx process stop) which triggers when we stop the DMA RX.

   This one shows when restarting the RX logic without doing a down/up
   cycle, like when attaching an XDP program. The XSK kselftests
   triggers it.

Let's make sure we clear these interrupts for multi-MSI cases. It's
already properly done for the single-chan interrupt, and for that
introduce an "ERR" DMA dir, as we don't want to touch the RI/TI bits
when handling these interrupts.

To avoid duplication, the DMA TX error handling is factored out in a
dedicated helper (in the same commit to ease backporting).

Both of the above storms have been found on dwmac-motorcomm (YT8601),
and are triggered by the xdp.py, xsk_reconfig.py, xdp_features.py,
ring_reconfig.py and netpoll_basic kernel selftests.

This seems to only affect dwmac4, there's no multi-msi mode on
dwmac1000, and on dwxgmac these interrupts are masked as of today.

Fixes: 6ccf12ae111e ("net: stmmac: use interrupt mode INTM=1 for multi-MSI")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
 drivers/net/ethernet/stmicro/stmmac/common.h  |  1 +
 .../net/ethernet/stmicro/stmmac/dwmac4_dma.h  |  5 ++
 .../net/ethernet/stmicro/stmmac/dwmac4_lib.c  |  2 +
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 46 +++++++++++++------
 4 files changed, 40 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index c74bc7c9750e..a972bee66504 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -382,6 +382,7 @@ enum dma_irq_dir {
 	DMA_DIR_RX = 0x1,
 	DMA_DIR_TX = 0x2,
 	DMA_DIR_RXTX = 0x3,
+	DMA_DIR_ERR = 0x4,
 };
 
 enum request_irq_err {
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h
index 43b036d4e95b..a7caac3c98e6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h
@@ -173,6 +173,11 @@ static inline u32 dma_chanx_base_addr(const struct dwmac4_addrs *addrs,
 					 DMA_CHAN_STATUS_TI | \
 					 DMA_CHAN_STATUS_MSK_COMMON)
 
+#define DMA_CHAN_STATUS_MSK_ERR		(DMA_CHAN_STATUS_AIS | \
+					 DMA_CHAN_STATUS_FBE | \
+					 DMA_CHAN_STATUS_RPS | \
+					 DMA_CHAN_STATUS_RBU)
+
 int dwmac4_dma_reset(void __iomem *ioaddr);
 void dwmac4_enable_dma_irq(struct stmmac_priv *priv, void __iomem *ioaddr,
 			   u32 chan, bool rx, bool tx);
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c
index a0249715fafa..02aa1a3dd1e2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c
@@ -150,6 +150,8 @@ int dwmac4_dma_interrupt(struct stmmac_priv *priv, void __iomem *ioaddr,
 		intr_status &= DMA_CHAN_STATUS_MSK_RX;
 	else if (dir == DMA_DIR_TX)
 		intr_status &= DMA_CHAN_STATUS_MSK_TX;
+	else if (dir == DMA_DIR_ERR)
+		intr_status &= DMA_CHAN_STATUS_MSK_ERR;
 
 	/* ABNORMAL interrupts */
 	if (unlikely(intr_status & DMA_CHAN_STATUS_AIS)) {
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 9ded31150fbe..2068b57df8d5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3141,6 +3141,16 @@ static int stmmac_napi_check(struct stmmac_priv *priv, u32 chan, u32 dir)
 	return status;
 }
 
+static void stmmac_dma_tx_error(struct stmmac_priv *priv, u32 chan, int status)
+{
+	if (unlikely(status & tx_hard_error_bump_tc)) {
+		/* Try to bump up the dma threshold on this failure */
+		stmmac_bump_dma_threshold(priv, chan);
+	} else if (unlikely(status == tx_hard_error)) {
+		stmmac_tx_err(priv, chan);
+	}
+}
+
 /**
  * stmmac_dma_interrupt - DMA ISR
  * @priv: driver private structure
@@ -3165,13 +3175,24 @@ static void stmmac_dma_interrupt(struct stmmac_priv *priv)
 		status[chan] = stmmac_napi_check(priv, chan,
 						 DMA_DIR_RXTX);
 
-	for (chan = 0; chan < tx_channel_count; chan++) {
-		if (unlikely(status[chan] & tx_hard_error_bump_tc)) {
-			/* Try to bump up the dma threshold on this failure */
-			stmmac_bump_dma_threshold(priv, chan);
-		} else if (unlikely(status[chan] == tx_hard_error)) {
-			stmmac_tx_err(priv, chan);
-		}
+	for (chan = 0; chan < tx_channel_count; chan++)
+		stmmac_dma_tx_error(priv, chan, status[chan]);
+}
+
+static void stmmac_dma_err_interrupt(struct stmmac_priv *priv)
+{
+	u8 tx_channel_count = priv->plat->tx_queues_to_use;
+	u8 channels_to_check = max(priv->plat->rx_queues_to_use,
+				   tx_channel_count);
+	int status;
+	u8 chan;
+
+	for (chan = 0; chan < channels_to_check; chan++) {
+		status = stmmac_dma_interrupt_status(priv, priv->ioaddr,
+						     &priv->xstats, chan,
+						     DMA_DIR_ERR);
+		if (chan < tx_channel_count)
+			stmmac_dma_tx_error(priv, chan, status);
 	}
 }
 
@@ -6466,6 +6487,9 @@ static irqreturn_t stmmac_mac_interrupt(int irq, void *dev_id)
 	/* To handle Common interrupts */
 	stmmac_common_interrupt(priv);
 
+	if (priv->plat->core_type == DWMAC_CORE_GMAC4)
+		stmmac_dma_err_interrupt(priv);
+
 	return IRQ_HANDLED;
 }
 
@@ -6500,13 +6524,7 @@ static irqreturn_t stmmac_msi_intr_tx(int irq, void *data)
 		return IRQ_HANDLED;
 
 	status = stmmac_napi_check(priv, chan, DMA_DIR_TX);
-
-	if (unlikely(status & tx_hard_error_bump_tc)) {
-		/* Try to bump up the dma threshold on this failure */
-		stmmac_bump_dma_threshold(priv, chan);
-	} else if (unlikely(status == tx_hard_error)) {
-		stmmac_tx_err(priv, chan);
-	}
+	stmmac_dma_tx_error(priv, chan, status);
 
 	return IRQ_HANDLED;
 }
-- 
2.56.0



             reply	other threads:[~2026-10-30 10:23 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-30 10:22 Maxime Chevallier [this message]
2026-10-30 12:32 ` [PATCH net] net: stmmac: Clear DMA errors for multi-channel interrupts Lorenzo Bianconi
2026-10-30 19:33 ` Nicolai Buchwitz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261030102251.208929-1-maxime.chevallier@bootlin.com \
    --to=maxime.chevallier@bootlin.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=alexis.lothore@bootlin.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=horms@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=lorenzo.bianconi@oss.qualcomm.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=ovidiu.panait.rb@renesas.com \
    --cc=pabeni@redhat.com \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox