From: Gary Yang <gary.yang@cixtech.com>
To: Vinod Koul <vkoul@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Manivannan Sadhasivam <mani@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Fugang Duan <fugang.duan@cixtech.com>
Cc: CIX Linux Kernel Upstream Group <cix-kernel-upstream@cixtech.com>,
linux-arm-kernel@lists.infradead.org,
linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Gary Yang <gary.yang@cixtech.com>
Subject: [PATCH 0/3] phy: cix: add Sky1 USB/DP combo PHY
Date: Mon, 2 Nov 2026 16:15:29 +0800 [thread overview]
Message-ID: <20261102081532.2305142-1-gary.yang@cixtech.com> (raw)
This series adds support for the USB/DP combo PHY found on the CIX Sky1
SoC. Each PHY instance provides one SuperSpeedPlus USB lane and one
DisplayPort lane of a USB Type-C port, with plug orientation and USB/DP
lane muxing handled through the S5 system controller.
The PHY registers a Type-C switch and mux so that the connector driver
owns orientation and mode decisions, and exposes the USB and DP lanes as
separate child PHYs so that the USB and DP controllers can bind to them
independently.
Patch 1 documents the binding, patch 2 adds the driver, and patch 3 adds
the SoC nodes and enables them on the Radxa Orion O6.
The driver has been built for arm64 with the PHY enabled both built-in
and as a module. dt_binding_check, dtbs_check and checkpatch --strict
pass.
Signed-off-by: Gary Yang <gary.yang@cixtech.com>
Gary Yang (3):
dt-bindings: phy: add CIX Sky1 USB/DP combo PHY
phy: cix: add Sky1 USB/DP combo PHY driver
arm64: dts: cix: add Sky1 USB/DP combo PHY
.../bindings/phy/cix,sky1-usbdp-phy.yaml | 150 ++
MAINTAINERS | 2 +
arch/arm64/boot/dts/cix/sky1-orion-o6.dts | 28 +
arch/arm64/boot/dts/cix/sky1.dtsi | 96 ++
drivers/phy/Kconfig | 1 +
drivers/phy/Makefile | 1 +
drivers/phy/cix/Kconfig | 22 +
drivers/phy/cix/Makefile | 2 +
drivers/phy/cix/phy-cix-usbdp.c | 1477 +++++++++++++++++
drivers/phy/cix/phy-cix-usbdp.h | 265 +++
10 files changed, 2044 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/cix,sky1-usbdp-phy.yaml
create mode 100644 drivers/phy/cix/Kconfig
create mode 100644 drivers/phy/cix/Makefile
create mode 100644 drivers/phy/cix/phy-cix-usbdp.c
create mode 100644 drivers/phy/cix/phy-cix-usbdp.h
--
2.50.1
next reply other threads:[~2026-11-02 8:15 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-02 8:15 Gary Yang [this message]
2026-11-02 8:15 ` [PATCH 1/3] dt-bindings: phy: add CIX Sky1 USB/DP combo PHY Gary Yang
2026-11-02 8:15 ` [PATCH 2/3] phy: cix: add Sky1 USB/DP combo PHY driver Gary Yang
2026-11-02 8:15 ` [PATCH 3/3] arm64: dts: cix: add Sky1 USB/DP combo PHY Gary Yang
-- strict thread matches above, loose matches on Subject: below --
2026-11-02 8:21 [PATCH 0/3] phy: " Gary Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261102081532.2305142-1-gary.yang@cixtech.com \
--to=gary.yang@cixtech.com \
--cc=cix-kernel-upstream@cixtech.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=fugang.duan@cixtech.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=mani@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox