Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Christian Marangi <ansuelsmth@gmail.com>
To: Maxime Chevallier <maxime.chevallier@bootlin.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@kernel.org>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Simon Horman <horms@kernel.org>, Jonathan Corbet <corbet@lwn.net>,
	Shuah Khan <skhan@linuxfoundation.org>,
	Randy Dunlap <rdunlap@infradead.org>,
	Christian Marangi <ansuelsmth@gmail.com>,
	Lorenzo Bianconi <lorenzo@kernel.org>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Nathan Chancellor <nathan@kernel.org>,
	Nick Desaulniers <ndesaulniers@google.com>,
	Bill Wendling <morbo@google.com>,
	Justin Stitt <justinstitt@google.com>,
	netdev@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, llvm@lists.linux.dev
Subject: [PATCH net-next v19 06/15] net: phylink: make phylink_validate state locked
Date: Fri, 13 Nov 2026 01:31:56 +0100	[thread overview]
Message-ID: <20261113003217.197757-7-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20261113003217.197757-1-ansuelsmth@gmail.com>

In preparation for support for PCS release/late attach, rework the
phylink_validate functions to be locked under the state mutex.

With the introduction of a notifier that can be called concurrently while a
phylink_create is called or an interface mode validation is being run, on
recalculating the supported interface and capabilities, an inconsistency
can be introduced with 2 validation run at the same time.

To handle this, make the phylink_validate lock under the phylink state
mutex, add lockless variant for phylink_validate_mask and phylink_validate
and add lockdep check to make sure the mutex is held in the inner
validate functions.

Function that already run phylink_validate under state mutex, are updated
to use the lockless variant.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/net/phy/phylink.c | 47 +++++++++++++++++++++++++++++++++------
 1 file changed, 40 insertions(+), 7 deletions(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index e2e0b313fd61..918aa95e5a64 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -9,6 +9,7 @@
 #include <linux/ethtool.h>
 #include <linux/export.h>
 #include <linux/gpio/consumer.h>
+#include <linux/lockdep.h>
 #include <linux/netdevice.h>
 #include <linux/of.h>
 #include <linux/of_mdio.h>
@@ -550,6 +551,8 @@ static int phylink_validate_mac_and_pcs(struct phylink *pl,
 	unsigned long capabilities;
 	int ret;
 
+	lockdep_assert_held(&pl->state_mutex);
+
 	/* Get the PCS for this interface mode */
 	if (pl->mac_ops->mac_select_pcs) {
 		pcs = pl->mac_ops->mac_select_pcs(pl->config, state->interface);
@@ -628,6 +631,8 @@ static void phylink_validate_one(struct phylink *pl, struct phy_device *phy,
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(tmp_supported);
 	struct phylink_link_state tmp_state;
 
+	lockdep_assert_held(&pl->state_mutex);
+
 	linkmode_copy(tmp_supported, supported);
 
 	tmp_state = *state;
@@ -648,15 +653,17 @@ static void phylink_validate_one(struct phylink *pl, struct phy_device *phy,
 	}
 }
 
-static int phylink_validate_mask(struct phylink *pl, struct phy_device *phy,
-				 unsigned long *supported,
-				 struct phylink_link_state *state,
-				 const unsigned long *interfaces)
+static int __phylink_validate_mask(struct phylink *pl, struct phy_device *phy,
+				   unsigned long *supported,
+				   struct phylink_link_state *state,
+				   const unsigned long *interfaces)
 {
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(all_adv) = { 0, };
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(all_s) = { 0, };
 	int interface;
 
+	lockdep_assert_held(&pl->state_mutex);
+
 	for_each_set_bit(interface, interfaces, PHY_INTERFACE_MODE_MAX)
 		phylink_validate_one(pl, phy, supported, state, interface,
 				     all_s, all_adv);
@@ -667,8 +674,22 @@ static int phylink_validate_mask(struct phylink *pl, struct phy_device *phy,
 	return phylink_is_empty_linkmode(supported) ? -EINVAL : 0;
 }
 
-static int phylink_validate(struct phylink *pl, unsigned long *supported,
-			    struct phylink_link_state *state)
+static int phylink_validate_mask(struct phylink *pl, struct phy_device *phy,
+				 unsigned long *supported,
+				 struct phylink_link_state *state,
+				 const unsigned long *interfaces)
+{
+	int ret;
+
+	mutex_lock(&pl->state_mutex);
+	ret = __phylink_validate_mask(pl, phy, supported, state, interfaces);
+	mutex_unlock(&pl->state_mutex);
+
+	return ret;
+}
+
+static int __phylink_validate(struct phylink *pl, unsigned long *supported,
+			      struct phylink_link_state *state)
 {
 	const unsigned long *interfaces = pl->supported_interfaces;
 
@@ -682,6 +703,18 @@ static int phylink_validate(struct phylink *pl, unsigned long *supported,
 	return phylink_validate_mac_and_pcs(pl, supported, state);
 }
 
+static int phylink_validate(struct phylink *pl, unsigned long *supported,
+			    struct phylink_link_state *state)
+{
+	int ret;
+
+	mutex_lock(&pl->state_mutex);
+	ret = __phylink_validate(pl, supported, state);
+	mutex_unlock(&pl->state_mutex);
+
+	return ret;
+}
+
 static void phylink_fill_fixedlink_supported(unsigned long *supported)
 {
 	linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, supported);
@@ -2117,7 +2150,7 @@ void phylink_update_mac_pause_capabilities(struct phylink *pl, unsigned long mac
 	else if (pl->sfp_bus)
 		linkmode_and(pl->supported, pl->supported, pl->sfp_support);
 
-	phylink_validate(pl, pl->supported, config);
+	__phylink_validate(pl, pl->supported, config);
 
 	pause_state = config->pause;
 
-- 
2.55.0



  parent reply	other threads:[~2026-11-13  0:33 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-13  0:31 [PATCH net-next v19 00/15] net: pcs: Introduce support for fwnode PCS Christian Marangi
2026-11-13  0:31 ` [PATCH net-next v19 01/15] net: phylink: keep and use MAC supported_interfaces in phylink struct Christian Marangi
2026-11-13  0:31 ` [PATCH net-next v19 02/15] net: phylink: make PCS phylink instance access RCU protected Christian Marangi
2026-11-13  0:31 ` [PATCH net-next v19 04/15] net: pcs: implement Firmware node support for PCS driver Christian Marangi
2026-11-13  0:31 ` [PATCH net-next v19 05/15] net: phylink: save phylink instance fwnode on phylink_create Christian Marangi
2026-11-13  0:31 ` Christian Marangi [this message]
2026-11-13  0:31 ` [PATCH net-next v19 07/15] net: phylink: add capabilities helper and track modified advertising Christian Marangi
2026-11-13  0:31 ` [PATCH net-next v19 08/15] net: phylink: support PCS provider release Christian Marangi
2026-11-13  0:31 ` [PATCH net-next v19 09/15] net: phylink: support late PCS provider attach Christian Marangi
2026-11-13  0:32 ` [PATCH net-next v19 10/15] net: Document PCS subsystem Christian Marangi
2026-11-13  0:32 ` [PATCH net-next v19 11/15] MAINTAINERS: add myself as PCS subsystem maintainer Christian Marangi
2026-11-13  0:32 ` [PATCH net-next v19 12/15] net: phylink: add .pcs_link_down PCS OP Christian Marangi
2026-11-13  0:32 ` [PATCH net-next v19 13/15] dt-bindings: net: pcs: Document support for Airoha Ethernet PCS Christian Marangi
2026-11-13  0:32 ` [PATCH net-next v19 15/15] net: airoha: add phylink support Christian Marangi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261113003217.197757-7-ansuelsmth@gmail.com \
    --to=ansuelsmth@gmail.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=conor+dt@kernel.org \
    --cc=corbet@lwn.net \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@kernel.org \
    --cc=hkallweit1@gmail.com \
    --cc=horms@kernel.org \
    --cc=justinstitt@google.com \
    --cc=krzk+dt@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux@armlinux.org.uk \
    --cc=llvm@lists.linux.dev \
    --cc=lorenzo@kernel.org \
    --cc=maxime.chevallier@bootlin.com \
    --cc=morbo@google.com \
    --cc=nathan@kernel.org \
    --cc=ndesaulniers@google.com \
    --cc=netdev@vger.kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=pabeni@redhat.com \
    --cc=rdunlap@infradead.org \
    --cc=robh@kernel.org \
    --cc=skhan@linuxfoundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox