From: phucduc.bui@gmail.com
To: Mark Brown <broonie@kernel.org>,
Claudiu Beznea <claudiu.beznea@tuxon.dev>,
Andrei Simion <andrei.simion@microchip.com>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
linux-sound@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
bui duc phuc <phucduc.bui@gmail.com>
Subject: [PATCH 1/2] ASoC: atmel-classd: Simplify probe error handling
Date: Fri, 13 Nov 2026 17:37:26 +0700 [thread overview]
Message-ID: <20261113103727.30449-2-phucduc.bui@gmail.com> (raw)
In-Reply-To: <20261113103727.30449-1-phucduc.bui@gmail.com>
From: bui duc phuc <phucduc.bui@gmail.com>
Use dev_err_probe() for clock acquisition to suppress probe deferral
logs and remove the unnecessary cleanup label, as all resources are
managed by devm.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
sound/soc/atmel/atmel-classd.c | 29 ++++++++++-------------------
1 file changed, 10 insertions(+), 19 deletions(-)
diff --git a/sound/soc/atmel/atmel-classd.c b/sound/soc/atmel/atmel-classd.c
index 6693bdcbb8f5..117c8e400184 100644
--- a/sound/soc/atmel/atmel-classd.c
+++ b/sound/soc/atmel/atmel-classd.c
@@ -547,18 +547,14 @@ static int atmel_classd_probe(struct platform_device *pdev)
return dd->irq;
dd->pclk = devm_clk_get(dev, "pclk");
- if (IS_ERR(dd->pclk)) {
- ret = PTR_ERR(dd->pclk);
- dev_err(dev, "failed to get peripheral clock: %d\n", ret);
- return ret;
- }
+ if (IS_ERR(dd->pclk))
+ return dev_err_probe(dev, PTR_ERR(dd->pclk),
+ "failed to get peripheral clock\n");
dd->gclk = devm_clk_get(dev, "gclk");
- if (IS_ERR(dd->gclk)) {
- ret = PTR_ERR(dd->gclk);
- dev_err(dev, "failed to get GCK clock: %d\n", ret);
- return ret;
- }
+ if (IS_ERR(dd->gclk))
+ return dev_err_probe(dev, PTR_ERR(dd->gclk),
+ "failed to get GCK clock\n");
io_base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
if (IS_ERR(io_base))
@@ -593,29 +589,24 @@ static int atmel_classd_probe(struct platform_device *pdev)
/* register sound card */
card = devm_kzalloc(dev, sizeof(*card), GFP_KERNEL);
- if (!card) {
- ret = -ENOMEM;
- goto unregister_codec;
- }
+ if (!card)
+ return -ENOMEM;
snd_soc_card_set_drvdata(card, dd);
ret = atmel_classd_asoc_card_init(dev, card);
if (ret) {
dev_err(dev, "failed to init sound card\n");
- goto unregister_codec;
+ return ret;
}
ret = devm_snd_soc_register_card(dev, card);
if (ret) {
dev_err(dev, "failed to register sound card: %d\n", ret);
- goto unregister_codec;
+ return ret;
}
return 0;
-
-unregister_codec:
- return ret;
}
static struct platform_driver atmel_classd_driver = {
--
2.43.0
next prev parent reply other threads:[~2026-11-13 10:38 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-13 10:37 [PATCH 0/2] ASoC: atmel-classd: Improve clock and probe handling phucduc.bui
2026-11-13 10:37 ` phucduc.bui [this message]
2026-11-13 10:37 ` [PATCH 2/2] ASoC: atmel-classd: Enable pclk during probe phucduc.bui
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261113103727.30449-2-phucduc.bui@gmail.com \
--to=phucduc.bui@gmail.com \
--cc=alexandre.belloni@bootlin.com \
--cc=andrei.simion@microchip.com \
--cc=broonie@kernel.org \
--cc=claudiu.beznea@tuxon.dev \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox