[PATCH v2 5/6] spi: rockchip: Move to pm_runtime_resume_and_get

[Heiko Stuebner <heiko@sntech.de>]

From: Heiko Stuebner <heiko.stuebner@cherry.de>

Currently pm_runtime_get_sync() is used, which increments the usage
count even if the resume was not successful.

Move to the more modern pm_runtime_resume_and_get() which handles the
usage counter better.

Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
---
 drivers/spi/spi-rockchip.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index 8bb55d52d346..ce1629e5a513 100644
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -255,7 +255,7 @@ static void rockchip_spi_set_cs(struct spi_device *spi, bool enable)
 
 	if (cs_asserted) {
 		/* Keep things powered as long as CS is asserted */
-		pm_runtime_get_sync(rs->dev);
+		pm_runtime_resume_and_get(rs->dev);
 
 		if (spi_get_csgpiod(spi, 0))
 			ROCKCHIP_SPI_SET_BITS(rs->regs + ROCKCHIP_SPI_SER, 1);
@@ -734,7 +734,7 @@ static int rockchip_spi_setup(struct spi_device *spi)
 		return -EINVAL;
 	}
 
-	pm_runtime_get_sync(rs->dev);
+	pm_runtime_resume_and_get(rs->dev);
 
 	cr0 = readl_relaxed(rs->regs + ROCKCHIP_SPI_CTRLR0);
 
@@ -924,7 +924,7 @@ static void rockchip_spi_remove(struct platform_device *pdev)
 {
 	struct spi_controller *ctlr = platform_get_drvdata(pdev);
 
-	pm_runtime_get_sync(&pdev->dev);
+	pm_runtime_resume_and_get(&pdev->dev);
 
 	spi_unregister_controller(ctlr);
 
-- 
2.53.0