From: Stefano Radaelli <stefano.radaelli21@gmail.com>
To: Frank Li <Frank.Li@nxp.com>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org
Cc: pierluigi.p@variscite.com,
Stefano Radaelli <stefano.r@variscite.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Subject: [PATCH v1 1/1] arm64: dts: imx8mm-var: Add Cortex-M4 support
Date: Mon, 16 Nov 2026 12:13:36 +0100 [thread overview]
Message-ID: <20261116111337.15740-1-stefano.r@variscite.com> (raw)
From: Stefano Radaelli <stefano.r@variscite.com>
Add Cortex-M4 configurations for DART-MX8M-MINI on Sonata and
VAR-SOM-MX8M-MINI on Symphony.
Share the reserved memory and remoteproc configuration through a common
include, and add -m4 DTBs for remoteproc and RPMsg support.
Reserve ECSPI1, I2C4, PWM3 and UART3 for the Cortex-M4 firmware. On Sonata,
also disable the buttons and PCIe, which depend on GPIO expanders on
I2C4.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
arch/arm64/boot/dts/freescale/Makefile | 7 +++
.../dts/freescale/imx8mm-var-common-m4.dtsi | 60 +++++++++++++++++++
.../freescale/imx8mm-var-dart-sonata-m4.dts | 44 ++++++++++++++
.../freescale/imx8mm-var-som-symphony-m4.dtso | 31 ++++++++++
4 files changed, 142 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-var-common-m4.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-var-dart-sonata-m4.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony-m4.dtso
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index cfd548284358..9574763dec09 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -245,9 +245,16 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-prt8mm.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-tqma8mqml-mba8mx.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-tx8m-1610-moduline-iv-306-d.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-tx8m-1610-moduline-mini-111.dtb
+
dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-dart-sonata.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-dart-sonata-m4.dtb
+
+imx8mm-var-som-symphony-m4-dtbs := imx8mm-var-som-symphony.dtb imx8mm-var-som-symphony-m4.dtbo
dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony-legacy.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony-m4.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony-m4.dtbo
+
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-common-m4.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-var-common-m4.dtsi
new file mode 100644
index 000000000000..98790a28694d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-var-common-m4.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Common Cortex-M4 configuration for Variscite i.MX8M Mini modules
+ *
+ * Link: https://www.variscite.com/
+ *
+ * Copyright (C) 2026 Variscite Ltd. - https://www.variscite.com/
+ *
+ */
+
+#include <dt-bindings/clock/imx8mm-clock.h>
+
+&{/} {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ vdev0vring0: vdev0vring0@40000000 {
+ reg = <0 0x40000000 0 0x8000>;
+ no-map;
+ };
+
+ vdev0vring1: vdev0vring1@40008000 {
+ reg = <0 0x40008000 0 0x8000>;
+ no-map;
+ };
+
+ rsc_table: rsc-table@400ff000 {
+ reg = <0 0x400ff000 0 0x1000>;
+ no-map;
+ };
+
+ vdev0buffer: vdev0buffer@40400000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0x40400000 0 0x100000>;
+ no-map;
+ };
+
+ m4_reserved: m4@7e000000 {
+ reg = <0 0x7e000000 0 0x1000000>;
+ no-map;
+ };
+ };
+
+ imx8mm-cm4 {
+ compatible = "fsl,imx8mm-cm4";
+ clocks = <&clk IMX8MM_CLK_M4_CORE>;
+ mbox-names = "tx", "rx", "rxdb";
+ mboxes = <&mu 0 1
+ &mu 1 1
+ &mu 3 1>;
+ memory-region = <&vdev0buffer>, <&vdev0vring0>, <&vdev0vring1>,
+ <&m4_reserved>, <&rsc_table>;
+ syscon = <&src>;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-dart-sonata-m4.dts b/arch/arm64/boot/dts/freescale/imx8mm-var-dart-sonata-m4.dts
new file mode 100644
index 000000000000..35e3ea43e5ec
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-var-dart-sonata-m4.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Cortex-M4 support for Variscite DART-MX8M-MINI on Sonata-Board
+ *
+ * Link: https://variscite.com/carrier-boards/sonata-board/
+ *
+ * Copyright (C) 2026 Variscite Ltd. - https://www.variscite.com/
+ *
+ */
+
+#include "imx8mm-var-dart-sonata.dts"
+#include "imx8mm-var-common-m4.dtsi"
+
+/* The buttons use a GPIO expander on I2C4. */
+&{/gpio-keys} {
+ status = "disabled";
+};
+
+/* Reserve the peripherals used by the Cortex-M4 firmware. */
+&ecspi1 {
+ status = "disabled";
+};
+
+/* The touchscreen reset uses a GPIO expander on I2C4. */
+&ft5x06_ts {
+ /delete-property/ reset-gpios;
+};
+
+&i2c4 {
+ status = "disabled";
+};
+
+/* The PCIe reset uses a GPIO expander on I2C4. */
+&pcie0 {
+ status = "disabled";
+};
+
+&pwm3 {
+ status = "disabled";
+};
+
+&uart3 {
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony-m4.dtso b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony-m4.dtso
new file mode 100644
index 000000000000..f2a1618edcf5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony-m4.dtso
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Cortex-M4 support for Variscite VAR-SOM-MX8M-MINI on Symphony-Board
+ *
+ * Link: https://variscite.com/carrier-boards/symphony-board/
+ *
+ * Copyright (C) 2026 Variscite Ltd. - https://www.variscite.com/
+ *
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include "imx8mm-var-common-m4.dtsi"
+
+/* Reserve the peripherals used by the Cortex-M4 firmware. */
+&ecspi1 {
+ status = "disabled";
+};
+
+&i2c4 {
+ status = "disabled";
+};
+
+&pwm3 {
+ status = "disabled";
+};
+
+&uart3 {
+ status = "disabled";
+};
--
2.47.3
reply other threads:[~2026-11-16 11:13 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261116111337.15740-1-stefano.r@variscite.com \
--to=stefano.radaelli21@gmail.com \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pierluigi.p@variscite.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=stefano.r@variscite.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox