From: Vitor Soares <ivitro@gmail.com>
To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
Tero Kristo <kristo@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Vitor Soares <vitor.soares@toradex.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] arm64: dts: ti: k3-am69-aquila: Add ath12k calibration variant
Date: Tue, 17 Nov 2026 17:41:56 +0000 [thread overview]
Message-ID: <20261117174154.549590-6-ivitro@gmail.com> (raw)
In-Reply-To: <20261117174154.549590-4-ivitro@gmail.com>
From: Vitor Soares <vitor.soares@toradex.com>
The Aquila AM69 has a Silex SX-PCEBE Wi-Fi module (WCN7850). The
module reports the same PCI and QMI IDs as other WCN7850 designs,
and its board data also comes in variants for different regulatory
domains (US/EU/JP, UK/CA low and high). The IDs alone therefore
cannot identify the right board data.
Describe the Wi-Fi device behind the PCIE3 root port and set
qcom,calibration-variant to the US/EU/JP board data.
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
---
arch/arm64/boot/dts/ti/k3-am69-aquila.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am69-aquila.dtsi b/arch/arm64/boot/dts/ti/k3-am69-aquila.dtsi
index b6854acee8fe..62904e9bcc71 100644
--- a/arch/arm64/boot/dts/ti/k3-am69-aquila.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am69-aquila.dtsi
@@ -1393,6 +1393,21 @@ &pcie3_rc {
reset-gpios = <&som_gpio_expander 4 GPIO_ACTIVE_HIGH>;
ti,syscon-acspcie-proxy-ctrl = <&acspcie0_proxy_ctrl 0x3>;
status = "okay";
+
+ pci@0,0 {
+ device_type = "pci";
+ compatible = "pciclass,0604";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ ranges;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ wifi@0 {
+ compatible = "pci17cb,1107";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ qcom,calibration-variant = "Silex_SX-PCEBE_US_EU_JP";
+ };
+ };
};
&serdes0 {
--
2.53.0
prev parent reply other threads:[~2026-11-17 17:42 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-17 17:41 [PATCH 0/2] Add ath12k calibration variant for Silex SX-PCEBE on Aquila AM69 Vitor Soares
2026-11-17 17:41 ` Vitor Soares [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261117174154.549590-6-ivitro@gmail.com \
--to=ivitro@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh@kernel.org \
--cc=vigneshr@ti.com \
--cc=vitor.soares@toradex.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox