From: Heiko Stuebner <heiko@sntech.de>
To: broonie@kernel.org
Cc: Heiko Stuebner <heiko@sntech.de>,
linux-spi@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, quentin.schulz@cherry.de,
Lee Jones <lee@kernel.org>,
Sebastian Reichel <sebastian.reichel@collabora.com>,
Heiko Stuebner <heiko.stuebner@cherry.de>
Subject: [PATCH v3 1/7] spi: Allow spi_toggle_csgpiod() to get called from atomic contexts
Date: Wed, 18 Nov 2026 00:50:15 +0100 [thread overview]
Message-ID: <20261117235021.2013719-2-heiko@sntech.de> (raw)
In-Reply-To: <20261117235021.2013719-1-heiko@sntech.de>
From: Heiko Stuebner <heiko.stuebner@cherry.de>
spi_toggle_csgpiod() by default allows for sleeping gpio controllers.
In the upcoming atomic mode for late stage systems,
So determine which stage the system is at and select an appropriate
gpio_set_value function to use.
If for whatever reason a sleeping gpio controller is combined with
an atomic operation using a gpio-chipselect, this will cause a warning.
This also introduces a helper spi_in_atomic() to determine when that is
the case. While the upcoming atomic transfer should really only be used
during late system states, this helper just makes sure to distinguish
between sleeping / non-sleeping.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
---
drivers/spi/spi.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 40cda0037ea5..3aeee3b11c0c 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -1244,8 +1244,18 @@ static inline bool spi_is_last_cs(struct spi_device *spi)
return last;
}
+/* Check if sleeping is allowed */
+static inline bool spi_in_atomic(void)
+{
+ return IS_ENABLED(CONFIG_PREEMPT_COUNT) ? !preemptible() : irqs_disabled();
+}
+
static void spi_toggle_csgpiod(struct spi_device *spi, u8 idx, bool enable, bool activate)
{
+ /* Will complain if atomic transfer is combined with sleeping gpio */
+ int (*gpio_func)(struct gpio_desc *desc, int value) =
+ spi_in_atomic() ? gpiod_set_value : gpiod_set_value_cansleep;
+
/*
* Historically ACPI has no means of the GPIO polarity and
* thus the SPISerialBus() resource defines it on the per-chip
@@ -1257,10 +1267,10 @@ static void spi_toggle_csgpiod(struct spi_device *spi, u8 idx, bool enable, bool
* into account.
*/
if (is_acpi_device_node(dev_fwnode(&spi->dev)))
- gpiod_set_value_cansleep(spi_get_csgpiod(spi, idx), !enable);
+ gpio_func(spi_get_csgpiod(spi, idx), !enable);
else
/* Polarity handled by GPIO library */
- gpiod_set_value_cansleep(spi_get_csgpiod(spi, idx), activate);
+ gpio_func(spi_get_csgpiod(spi, idx), activate);
if (activate)
spi_delay_exec(&spi->cs_setup, NULL);
--
2.53.0
next prev parent reply other threads:[~2026-11-17 23:51 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-17 23:50 [PATCH v3 0/7] spi: Implement a atomic transfer as a last resort Heiko Stuebner
2026-11-17 23:50 ` Heiko Stuebner [this message]
2026-11-17 23:50 ` [PATCH v3 2/7] spi: Allow spi_delay_exec() to be used from atomic contexts Heiko Stuebner
2026-11-17 23:50 ` [PATCH v3 3/7] spi: Export spi_set_cs() function Heiko Stuebner
2026-11-17 23:50 ` [PATCH v3 4/7] spi: Add infrastructure for atomic sync transfers Heiko Stuebner
2026-11-17 23:50 ` [PATCH v3 5/7] spi: rockchip: Fix runtime resume error handling Heiko Stuebner
2026-11-17 23:50 ` [PATCH v3 6/7] spi: rockchip: Move to pm_runtime_resume_and_get Heiko Stuebner
2026-11-17 23:50 ` [PATCH v3 7/7] spi: rockchip: Add an atomic transfer function Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261117235021.2013719-2-heiko@sntech.de \
--to=heiko@sntech.de \
--cc=broonie@kernel.org \
--cc=heiko.stuebner@cherry.de \
--cc=lee@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-spi@vger.kernel.org \
--cc=quentin.schulz@cherry.de \
--cc=sebastian.reichel@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox