From: Rosen Penev <rosenp@gmail.com>
To: "Florian Fainelli" <florian.fainelli@broadcom.com>,
"Hauke Mehrtens" <hauke@hauke-m.de>,
"Rafał Miłecki" <zajec5@gmail.com>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>
Cc: "Broadcom internal kernel review list"
<bcm-kernel-feedback-list@broadcom.com>,
"Rafał Miłecki" <rafal@milecki.pl>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: [PATCH 12/17] ARM: dts: BCM5301X: Luxul: use gmac2
Date: Tue, 17 Nov 2026 21:47:53 -0800 [thread overview]
Message-ID: <20261118054758.132233-13-rosenp@gmail.com> (raw)
In-Reply-To: <20261118054758.132233-1-rosenp@gmail.com>
Use switch port 8 as the CPU port instead of port 5 on all Luxul boards.
Port 8 is the switch's IMP port and connects to gmac2, which is present
on all Northstar SoCs. Move the nvram MAC address from gmac0 to gmac2 to
match.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts | 6 +++---
arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts | 6 +++---
arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts | 6 +++---
arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts | 6 +++---
arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts | 6 +++---
arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts | 6 +++---
arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts | 6 +++---
arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts | 6 +++---
arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts | 6 +++---
arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts | 6 +++---
10 files changed, 30 insertions(+), 30 deletions(-)
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts
index 72e960c888ac..3375b234fc9b 100644
--- a/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts
@@ -61,7 +61,7 @@ button-restart {
};
};
-&gmac0 {
+&gmac2 {
nvmem-cells = <&et0macaddr>;
nvmem-cell-names = "mac-address";
};
@@ -83,7 +83,7 @@ port@4 {
};
port@5 {
- label = "cpu";
+ status = "disabled";
};
port@7 {
@@ -91,7 +91,7 @@ port@7 {
};
port@8 {
- status = "disabled";
+ label = "cpu";
};
};
};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts
index 750e17482371..26ac2f2ed5a3 100644
--- a/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts
@@ -68,7 +68,7 @@ button-restart {
};
};
-&gmac0 {
+&gmac2 {
nvmem-cells = <&et0macaddr>;
nvmem-cell-names = "mac-address";
};
@@ -86,7 +86,7 @@ port@4 {
};
port@5 {
- label = "cpu";
+ status = "disabled";
};
port@7 {
@@ -94,7 +94,7 @@ port@7 {
};
port@8 {
- status = "disabled";
+ label = "cpu";
};
};
};
diff --git a/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts
index 0198b5f9e4a7..2b152115d03e 100644
--- a/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts
@@ -61,7 +61,7 @@ button-restart {
};
};
-&gmac0 {
+&gmac2 {
nvmem-cells = <&et0macaddr>;
nvmem-cell-names = "mac-address";
};
@@ -79,7 +79,7 @@ port@4 {
};
port@5 {
- label = "cpu";
+ status = "disabled";
};
port@7 {
@@ -87,7 +87,7 @@ port@7 {
};
port@8 {
- status = "disabled";
+ label = "cpu";
};
};
};
diff --git a/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts
index 73ff1694a4a0..b5664216dcef 100644
--- a/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts
@@ -110,7 +110,7 @@ &usb2 {
vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
};
-&gmac0 {
+&gmac2 {
nvmem-cells = <&et0macaddr 0>;
nvmem-cell-names = "mac-address";
};
@@ -146,7 +146,7 @@ port@4 {
};
port@5 {
- label = "cpu";
+ status = "disabled";
};
port@7 {
@@ -154,7 +154,7 @@ port@7 {
};
port@8 {
- status = "disabled";
+ label = "cpu";
};
};
};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts
index e374062eb5b7..00aa28a2e70e 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts
@@ -65,7 +65,7 @@ &usb3 {
vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
};
-&gmac0 {
+&gmac2 {
nvmem-cells = <&et0macaddr 0>;
nvmem-cell-names = "mac-address";
};
@@ -105,7 +105,7 @@ port@4 {
};
port@5 {
- label = "cpu";
+ status = "disabled";
};
port@7 {
@@ -113,7 +113,7 @@ port@7 {
};
port@8 {
- status = "disabled";
+ label = "cpu";
};
};
};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts
index 3a33705c2969..04420ebf056a 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts
@@ -59,7 +59,7 @@ button-restart {
};
};
-&gmac0 {
+&gmac2 {
nvmem-cells = <&et0macaddr>;
nvmem-cell-names = "mac-address";
};
@@ -98,7 +98,7 @@ port@1 {
};
port@5 {
- label = "cpu";
+ status = "disabled";
};
port@7 {
@@ -106,7 +106,7 @@ port@7 {
};
port@8 {
- status = "disabled";
+ label = "cpu";
};
};
};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts
index cf95af9db1e6..765b74919fcd 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts
@@ -65,7 +65,7 @@ &usb3 {
vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
};
-&gmac0 {
+&gmac2 {
nvmem-cells = <&et0macaddr 0>;
nvmem-cell-names = "mac-address";
};
@@ -105,7 +105,7 @@ port@4 {
};
port@5 {
- label = "cpu";
+ status = "disabled";
};
port@7 {
@@ -113,7 +113,7 @@ port@7 {
};
port@8 {
- status = "disabled";
+ label = "cpu";
};
};
};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts
index 992c19e1cfa1..eb4bdf8c9c7e 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts
@@ -55,7 +55,7 @@ &uart1 {
status = "okay";
};
-&gmac0 {
+&gmac2 {
nvmem-cells = <&et0macaddr>;
nvmem-cell-names = "mac-address";
};
@@ -73,7 +73,7 @@ port@0 {
};
port@5 {
- label = "cpu";
+ status = "disabled";
};
port@7 {
@@ -81,7 +81,7 @@ port@7 {
};
port@8 {
- status = "disabled";
+ label = "cpu";
};
};
};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts
index 4d0ba315a204..d5436d70ecbf 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts
@@ -105,7 +105,7 @@ &usb3 {
vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
};
-&gmac0 {
+&gmac2 {
nvmem-cells = <&et0macaddr 0>;
nvmem-cell-names = "mac-address";
};
@@ -145,7 +145,7 @@ port@4 {
};
port@5 {
- label = "cpu";
+ status = "disabled";
};
port@7 {
@@ -153,7 +153,7 @@ port@7 {
};
port@8 {
- status = "disabled";
+ label = "cpu";
};
};
};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts
index 8e487f60a2cc..64d3634d130c 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts
@@ -76,7 +76,7 @@ button-restart {
};
};
-&gmac0 {
+&gmac2 {
nvmem-cells = <&et0macaddr 0>;
nvmem-cell-names = "mac-address";
};
@@ -136,7 +136,7 @@ port@4 {
};
port@5 {
- label = "cpu";
+ status = "disabled";
};
port@7 {
@@ -144,7 +144,7 @@ port@7 {
};
port@8 {
- status = "disabled";
+ label = "cpu";
};
};
};
--
2.56.1
next prev parent reply other threads:[~2026-11-18 5:49 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-18 5:47 [PATCH 00/17] ARM: dts: BCM5301X: describe switches and use gmac2 as the CPU port Rosen Penev
2026-11-18 5:47 ` [PATCH 01/17] ARM: dts: BCM5301X: AC56U: specify switch Rosen Penev
2026-11-18 5:47 ` [PATCH 02/17] ARM: dts: BCM5301X: AC68U: " Rosen Penev
2026-11-18 5:47 ` [PATCH 03/17] ARM: dts: BCM5301X: N18U: " Rosen Penev
2026-11-18 5:47 ` [PATCH 04/17] ARM: dts: BCM5301X: R7000: " Rosen Penev
2026-11-18 5:47 ` [PATCH 05/17] ARM: dts: BCM5301X: EA6300: set gmac2 MAC address from nvram Rosen Penev
2026-11-18 5:47 ` [PATCH 06/17] ARM: dts: BCM5301X: EA6300: specify switch Rosen Penev
2026-11-18 5:47 ` [PATCH 07/17] ARM: dts: BCM5301X: phicomm-k3: add nvram node Rosen Penev
2026-11-18 5:47 ` [PATCH 08/17] ARM: dts: BCM5301X: phicomm-k3: specify switch Rosen Penev
2026-11-18 5:47 ` [PATCH 09/17] ARM: dts: BCM5301X: AC87U: use gmac2 Rosen Penev
2026-11-18 5:47 ` [PATCH 10/17] ARM: dts: BCM5301X: SR400AC: " Rosen Penev
2026-11-18 5:47 ` [PATCH 11/17] ARM: dts: BCM5301X: DIR-885L: " Rosen Penev
2026-11-18 5:47 ` Rosen Penev [this message]
2026-11-18 5:47 ` [PATCH 13/17] ARM: dts: BCM5301X: Buffalo: " Rosen Penev
2026-11-18 5:47 ` [PATCH 14/17] ARM: dts: BCM5301X: R6250: " Rosen Penev
2026-11-18 5:47 ` [PATCH 15/17] ARM: dts: BCM5301X: Meraki MR26/MR32: " Rosen Penev
2026-11-18 5:47 ` [PATCH 16/17] ARM: dts: BCM5301X: BCM953012ER: " Rosen Penev
2026-11-18 5:47 ` [PATCH 17/17] ARM: dts: BCM5301X: enable GMACs in boards that use them Rosen Penev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261118054758.132233-13-rosenp@gmail.com \
--to=rosenp@gmail.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=florian.fainelli@broadcom.com \
--cc=hauke@hauke-m.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=rafal@milecki.pl \
--cc=robh@kernel.org \
--cc=zajec5@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox