From: Faizel K B <faizel.kb@gmail.com>
To: Mehdi Djait <mehdi.djait@linux.intel.com>,
Michael Riesch <michael.riesch@collabora.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
Heiko Stuebner <heiko@sntech.de>,
linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
libcamera-devel@lists.libcamera.org,
Robert Mader <robert.mader@collabora.com>,
Faizel K B <faizel.kb@gmail.com>
Subject: [PATCH v2 2/2] media: rockchip: rkcif: Honour the requested bytesperline
Date: Wed, 18 Nov 2026 13:31:34 -0700 [thread overview]
Message-ID: <20261118203134.315591-3-faizel.kb@gmail.com> (raw)
In-Reply-To: <20261118203134.315591-1-faizel.kb@gmail.com>
The DMA uses bytesperline as the line stride, which must be a multiple
of 8 bytes, but v4l2_fill_pixfmt_mp() doesn't align it. Any larger
bytesperline requested by userspace is also replaced with the minimum.
Align bytesperline to 8 bytes and honour the largest value requested
for any plane, up to the limit of the line width register. The Y and
UV planes share the same line width. On the DVP, program the line width
from bytesperline, keeping the current value as the minimum.
This allows DMA-BUF importers that need a larger stride alignment to
use the buffers directly.
Signed-off-by: Faizel K B <faizel.kb@gmail.com>
---
.../rockchip/rkcif/rkcif-capture-dvp.c | 4 ++
.../rockchip/rkcif/rkcif-capture-mipi.c | 3 ++
.../platform/rockchip/rkcif/rkcif-common.h | 1 +
.../platform/rockchip/rkcif/rkcif-stream.c | 48 ++++++++++++++++++-
4 files changed, 54 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/rockchip/rkcif/rkcif-capture-dvp.c b/drivers/media/platform/rockchip/rkcif/rkcif-capture-dvp.c
index dbaf7636aeeb..64a37d6877e2 100644
--- a/drivers/media/platform/rockchip/rkcif/rkcif-capture-dvp.c
+++ b/drivers/media/platform/rockchip/rkcif/rkcif-capture-dvp.c
@@ -20,6 +20,8 @@
#include "rkcif-regs.h"
#include "rkcif-stream.h"
+#define RKCIF_DVP_MAX_BYTESPERLINE 0x7ff8 /* VIR_LINE_WIDTH: 15 bits */
+
static const struct rkcif_output_fmt dvp_out_fmts[] = {
{
.fourcc = V4L2_PIX_FMT_NV16,
@@ -689,6 +691,7 @@ static int rkcif_dvp_start_streaming(struct rkcif_stream *stream)
val = stream->pix.width;
if (active_in_fmt->fmt_type == RKCIF_FMT_TYPE_RAW)
val = stream->pix.width * 2;
+ val = max(val, stream->pix.plane_fmt[0].bytesperline);
rkcif_dvp_write(rkcif, RKCIF_DVP_VIR_LINE_WIDTH, val);
val = RKCIF_XY_COORD(stream->pix.width, stream->pix.height);
@@ -827,6 +830,7 @@ int rkcif_dvp_register(struct rkcif_device *rkcif)
stream->interface = interface;
stream->out_fmts = rkcif->match_data->dvp->out_fmts;
stream->out_fmts_num = rkcif->match_data->dvp->out_fmts_num;
+ stream->max_bytesperline = RKCIF_DVP_MAX_BYTESPERLINE;
stream->queue_buffer = rkcif_dvp_queue_buffer;
stream->start_streaming = rkcif_dvp_start_streaming;
stream->stop_streaming = rkcif_dvp_stop_streaming;
diff --git a/drivers/media/platform/rockchip/rkcif/rkcif-capture-mipi.c b/drivers/media/platform/rockchip/rkcif/rkcif-capture-mipi.c
index 53e62d059764..d5eaedd2c43b 100644
--- a/drivers/media/platform/rockchip/rkcif/rkcif-capture-mipi.c
+++ b/drivers/media/platform/rockchip/rkcif/rkcif-capture-mipi.c
@@ -24,6 +24,8 @@
#include "rkcif-regs.h"
#include "rkcif-stream.h"
+#define RKCIF_MIPI_MAX_BYTESPERLINE 0xffff8 /* VLW: 20 bits */
+
#define RK3568_MIPI_CTRL0_HIGH_ALIGN BIT(31)
#define RK3568_MIPI_CTRL0_UV_SWAP_EN BIT(7)
#define RK3568_MIPI_CTRL0_COMPACT_EN BIT(6)
@@ -1026,6 +1028,7 @@ int rkcif_mipi_register(struct rkcif_device *rkcif)
stream->interface = interface;
stream->out_fmts = mipi_out_fmts;
stream->out_fmts_num = ARRAY_SIZE(mipi_out_fmts);
+ stream->max_bytesperline = RKCIF_MIPI_MAX_BYTESPERLINE;
stream->queue_buffer = rkcif_mipi_queue_buffer;
stream->start_streaming = rkcif_mipi_start_streaming;
stream->stop_streaming = rkcif_mipi_stop_streaming;
diff --git a/drivers/media/platform/rockchip/rkcif/rkcif-common.h b/drivers/media/platform/rockchip/rkcif/rkcif-common.h
index 08a213438d34..63e5a221cd73 100644
--- a/drivers/media/platform/rockchip/rkcif/rkcif-common.h
+++ b/drivers/media/platform/rockchip/rkcif/rkcif-common.h
@@ -145,6 +145,7 @@ struct rkcif_stream {
struct rkcif_interface *interface;
const struct rkcif_output_fmt *out_fmts;
unsigned int out_fmts_num;
+ u32 max_bytesperline;
/* in ping-pong mode, two buffers can be provided to the HW */
struct rkcif_buffer *buffers[2];
diff --git a/drivers/media/platform/rockchip/rkcif/rkcif-stream.c b/drivers/media/platform/rockchip/rkcif/rkcif-stream.c
index b117ba57bc75..f700b40ab099 100644
--- a/drivers/media/platform/rockchip/rkcif/rkcif-stream.c
+++ b/drivers/media/platform/rockchip/rkcif/rkcif-stream.c
@@ -23,6 +23,7 @@
#define CIF_MIN_HEIGHT 64
#define CIF_MAX_WIDTH 8192
#define CIF_MAX_HEIGHT 8192
+#define CIF_BYTESPERLINE_ALIGN 8
static inline struct rkcif_buffer *to_rkcif_buffer(struct vb2_v4l2_buffer *vb)
{
@@ -334,20 +335,63 @@ static const struct vb2_ops rkcif_stream_vb2_ops = {
.stop_streaming = rkcif_stream_stop_streaming,
};
+static u32 rkcif_stream_plane_lines(const struct v4l2_format_info *info,
+ unsigned int plane, u32 height)
+{
+ return plane ? DIV_ROUND_UP(height, info->vdiv) : height;
+}
+
+static void rkcif_stream_set_bytesperline(struct rkcif_stream *stream,
+ struct v4l2_pix_format_mplane *pix,
+ u32 req_bpl)
+{
+ const struct v4l2_format_info *info = v4l2_format_info(pix->pixelformat);
+ u32 bpl = pix->plane_fmt[0].bytesperline;
+ u32 total_lines = 0, max_bpl;
+ unsigned int i;
+
+ for (i = 0; i < info->comp_planes; i++)
+ total_lines += rkcif_stream_plane_lines(info, i, pix->height);
+
+ max_bpl = min(stream->max_bytesperline,
+ ALIGN_DOWN(U32_MAX / total_lines, CIF_BYTESPERLINE_ALIGN));
+ if (req_bpl > bpl && req_bpl <= max_bpl)
+ bpl = ALIGN(req_bpl, CIF_BYTESPERLINE_ALIGN);
+
+ /* The Y and UV planes share the same line width. */
+ if (info->mem_planes == 1) {
+ pix->plane_fmt[0].bytesperline = bpl;
+ pix->plane_fmt[0].sizeimage = bpl * total_lines;
+ } else {
+ for (i = 0; i < info->mem_planes; i++) {
+ pix->plane_fmt[i].bytesperline = bpl;
+ pix->plane_fmt[i].sizeimage =
+ bpl * rkcif_stream_plane_lines(info, i,
+ pix->height);
+ }
+ }
+}
+
static int rkcif_stream_fill_format(struct rkcif_stream *stream,
struct v4l2_pix_format_mplane *pix)
{
const struct rkcif_output_fmt *fmt;
- u32 height, width;
+ u32 height, width, req_bpl = 0;
+ unsigned int i;
int ret;
fmt = rkcif_stream_find_output_fmt(stream, true, pix->pixelformat);
height = clamp_t(u32, pix->height, CIF_MIN_HEIGHT, CIF_MAX_HEIGHT);
width = clamp_t(u32, pix->width, CIF_MIN_WIDTH, CIF_MAX_WIDTH);
- ret = v4l2_fill_pixfmt_mp(pix, fmt->fourcc, width, height);
+ for (i = 0; i < pix->num_planes; i++)
+ req_bpl = max(req_bpl, pix->plane_fmt[i].bytesperline);
+ ret = v4l2_fill_pixfmt_mp_aligned(pix, fmt->fourcc, width, height,
+ CIF_BYTESPERLINE_ALIGN);
if (ret)
return ret;
+ rkcif_stream_set_bytesperline(stream, pix, req_bpl);
+
pix->field = V4L2_FIELD_NONE;
return 0;
--
2.43.0
prev parent reply other threads:[~2026-11-18 20:34 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-18 20:31 [PATCH v2 0/2] media: rockchip: rkcif: ENUM_FMT and bytesperline fixes Faizel K B
2026-11-18 20:31 ` [PATCH v2 1/2] media: rockchip: rkcif: Filter enumerated formats by media bus code Faizel K B
2026-11-18 20:31 ` Faizel K B [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261118203134.315591-3-faizel.kb@gmail.com \
--to=faizel.kb@gmail.com \
--cc=heiko@sntech.de \
--cc=libcamera-devel@lists.libcamera.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mchehab@kernel.org \
--cc=mehdi.djait@linux.intel.com \
--cc=michael.riesch@collabora.com \
--cc=robert.mader@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox