Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Rosen Penev <rosenp@gmail.com>
To: "Florian Fainelli" <florian.fainelli@broadcom.com>,
	"Hauke Mehrtens" <hauke@hauke-m.de>,
	"Rafał Miłecki" <zajec5@gmail.com>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>
Cc: "Broadcom internal kernel review list"
	<bcm-kernel-feedback-list@broadcom.com>,
	"Rafał Miłecki" <rafal@milecki.pl>,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: [PATCH v2 21/22] ARM: dts: BCM5301X: use gmac2 as the CPU port
Date: Thu, 19 Nov 2026 00:54:51 -0800	[thread overview]
Message-ID: <20261119085452.75708-22-rosenp@gmail.com> (raw)
In-Reply-To: <20261119085452.75708-1-rosenp@gmail.com>

Port 8 is the switch's IMP port and connects to gmac2, which is present
on all Northstar SoCs. Several boards with a single CPU port use port 5
(gmac0) or port 7 (gmac1) instead. Switch them to port 8 and assign the
nvram MAC address to gmac2:

- AC87U: the MAC address is assigned to gmac0, but port 5 is disabled
  and port 7 (gmac1) is the CPU port, so the interface that carries the
  traffic never gets it.
- SR400AC, Luxul, R6250 and Meraki MR26/MR32: port 5 is the CPU port.
  R6250 had no nvram node, so add one. gmac0 got et0macaddr through the
  SPROM fallback, which gmac2 (et2macaddr) would not.

The Meraki port 5 fixed-link only repeated the bcm-ns.dtsi default, and
bcm-ns.dtsi already describes the port 8 fixed-link and links port 8 to
gmac2, so drop it.

Boards that use several CPU ports, and boards whose MAC address is only
known from the SPROM fallback (Buffalo WZR-600DHP2/WZR-1166DHP/
WZR-1166DHP2, BCM953012ER), are left unchanged.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 .../dts/broadcom/bcm4708-luxul-xap-1510.dts   |  6 +++---
 .../dts/broadcom/bcm4708-luxul-xwc-1000.dts   |  6 +++---
 .../dts/broadcom/bcm4708-netgear-r6250.dts    | 18 ++++++++++++++++--
 .../dts/broadcom/bcm4708-smartrg-sr400ac.dts  |  8 ++------
 .../dts/broadcom/bcm47081-luxul-xap-1410.dts  |  6 +++---
 .../dts/broadcom/bcm47081-luxul-xwr-1200.dts  |  6 +++---
 .../dts/broadcom/bcm4709-asus-rt-ac87u.dts    |  6 +-----
 .../dts/broadcom/bcm47094-luxul-abr-4500.dts  |  6 +++---
 .../dts/broadcom/bcm47094-luxul-xap-1610.dts  |  6 +++---
 .../dts/broadcom/bcm47094-luxul-xbr-4500.dts  |  6 +++---
 .../dts/broadcom/bcm47094-luxul-xwc-2000.dts  |  6 +++---
 .../dts/broadcom/bcm47094-luxul-xwr-3100.dts  |  6 +++---
 .../broadcom/bcm47094-luxul-xwr-3150-v1.dts   |  6 +++---
 .../dts/broadcom/bcm53015-meraki-mr26.dts     | 19 +++++++------------
 .../dts/broadcom/bcm53016-meraki-mr32.dts     | 15 +++++----------
 15 files changed, 61 insertions(+), 65 deletions(-)

diff --git a/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts
index 72e960c888ac..3375b234fc9b 100644
--- a/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts
@@ -61,7 +61,7 @@ button-restart {
 	};
 };
 
-&gmac0 {
+&gmac2 {
 	nvmem-cells = <&et0macaddr>;
 	nvmem-cell-names = "mac-address";
 };
@@ -83,7 +83,7 @@ port@4 {
 		};
 
 		port@5 {
-			label = "cpu";
+			status = "disabled";
 		};
 
 		port@7 {
@@ -91,7 +91,7 @@ port@7 {
 		};
 
 		port@8 {
-			status = "disabled";
+			label = "cpu";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts
index 750e17482371..26ac2f2ed5a3 100644
--- a/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts
@@ -68,7 +68,7 @@ button-restart {
 	};
 };
 
-&gmac0 {
+&gmac2 {
 	nvmem-cells = <&et0macaddr>;
 	nvmem-cell-names = "mac-address";
 };
@@ -86,7 +86,7 @@ port@4 {
 		};
 
 		port@5 {
-			label = "cpu";
+			status = "disabled";
 		};
 
 		port@7 {
@@ -94,7 +94,7 @@ port@7 {
 		};
 
 		port@8 {
-			status = "disabled";
+			label = "cpu";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts
index 2bdbc7d18b0e..81c2e6652a27 100644
--- a/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts
@@ -26,6 +26,15 @@ memory@0 {
 		      <0x88000000 0x08000000>;
 	};
 
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x180000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -83,6 +92,11 @@ button-restart {
 	};
 };
 
+&gmac2 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
 &usb3 {
 	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
 };
@@ -120,7 +134,7 @@ port@4 {
 		};
 
 		port@5 {
-			label = "cpu";
+			status = "disabled";
 		};
 
 		port@7 {
@@ -128,7 +142,7 @@ port@7 {
 		};
 
 		port@8 {
-			status = "disabled";
+			label = "cpu";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts
index 03f4a6d37a67..60661dde8ca5 100644
--- a/arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts
@@ -128,7 +128,7 @@ &spi_nor {
 	status = "okay";
 };
 
-&gmac0 {
+&gmac2 {
 	nvmem-cells = <&et0macaddr 0>;
 	nvmem-cell-names = "mac-address";
 };
@@ -161,14 +161,10 @@ port@4 {
 		};
 
 		port@5 {
-			label = "cpu";
-		};
-
-		port@7 {
 			status = "disabled";
 		};
 
-		port@8 {
+		port@7 {
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts
index 0198b5f9e4a7..2b152115d03e 100644
--- a/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts
@@ -61,7 +61,7 @@ button-restart {
 	};
 };
 
-&gmac0 {
+&gmac2 {
 	nvmem-cells = <&et0macaddr>;
 	nvmem-cell-names = "mac-address";
 };
@@ -79,7 +79,7 @@ port@4 {
 		};
 
 		port@5 {
-			label = "cpu";
+			status = "disabled";
 		};
 
 		port@7 {
@@ -87,7 +87,7 @@ port@7 {
 		};
 
 		port@8 {
-			status = "disabled";
+			label = "cpu";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts
index 73ff1694a4a0..b5664216dcef 100644
--- a/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts
@@ -110,7 +110,7 @@ &usb2 {
 	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
 };
 
-&gmac0 {
+&gmac2 {
 	nvmem-cells = <&et0macaddr 0>;
 	nvmem-cell-names = "mac-address";
 };
@@ -146,7 +146,7 @@ port@4 {
 		};
 
 		port@5 {
-			label = "cpu";
+			status = "disabled";
 		};
 
 		port@7 {
@@ -154,7 +154,7 @@ port@7 {
 		};
 
 		port@8 {
-			status = "disabled";
+			label = "cpu";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts
index 2fed02ebb1d7..4114c6eda1ac 100644
--- a/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts
@@ -71,7 +71,7 @@ button-restart {
 	};
 };
 
-&gmac0 {
+&gmac2 {
 	nvmem-cells = <&et1macaddr 0>;
 	nvmem-cell-names = "mac-address";
 };
@@ -108,10 +108,6 @@ port@5 {
 		};
 
 		port@7 {
-			label = "cpu";
-		};
-
-		port@8 {
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts
index e374062eb5b7..00aa28a2e70e 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts
@@ -65,7 +65,7 @@ &usb3 {
 	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
 };
 
-&gmac0 {
+&gmac2 {
 	nvmem-cells = <&et0macaddr 0>;
 	nvmem-cell-names = "mac-address";
 };
@@ -105,7 +105,7 @@ port@4 {
 		};
 
 		port@5 {
-			label = "cpu";
+			status = "disabled";
 		};
 
 		port@7 {
@@ -113,7 +113,7 @@ port@7 {
 		};
 
 		port@8 {
-			status = "disabled";
+			label = "cpu";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts
index 3a33705c2969..04420ebf056a 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts
@@ -59,7 +59,7 @@ button-restart {
 	};
 };
 
-&gmac0 {
+&gmac2 {
 	nvmem-cells = <&et0macaddr>;
 	nvmem-cell-names = "mac-address";
 };
@@ -98,7 +98,7 @@ port@1 {
 		};
 
 		port@5 {
-			label = "cpu";
+			status = "disabled";
 		};
 
 		port@7 {
@@ -106,7 +106,7 @@ port@7 {
 		};
 
 		port@8 {
-			status = "disabled";
+			label = "cpu";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts
index cf95af9db1e6..765b74919fcd 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts
@@ -65,7 +65,7 @@ &usb3 {
 	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
 };
 
-&gmac0 {
+&gmac2 {
 	nvmem-cells = <&et0macaddr 0>;
 	nvmem-cell-names = "mac-address";
 };
@@ -105,7 +105,7 @@ port@4 {
 		};
 
 		port@5 {
-			label = "cpu";
+			status = "disabled";
 		};
 
 		port@7 {
@@ -113,7 +113,7 @@ port@7 {
 		};
 
 		port@8 {
-			status = "disabled";
+			label = "cpu";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts
index 992c19e1cfa1..eb4bdf8c9c7e 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts
@@ -55,7 +55,7 @@ &uart1 {
 	status = "okay";
 };
 
-&gmac0 {
+&gmac2 {
 	nvmem-cells = <&et0macaddr>;
 	nvmem-cell-names = "mac-address";
 };
@@ -73,7 +73,7 @@ port@0 {
 		};
 
 		port@5 {
-			label = "cpu";
+			status = "disabled";
 		};
 
 		port@7 {
@@ -81,7 +81,7 @@ port@7 {
 		};
 
 		port@8 {
-			status = "disabled";
+			label = "cpu";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts
index 4d0ba315a204..d5436d70ecbf 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts
@@ -105,7 +105,7 @@ &usb3 {
 	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
 };
 
-&gmac0 {
+&gmac2 {
 	nvmem-cells = <&et0macaddr 0>;
 	nvmem-cell-names = "mac-address";
 };
@@ -145,7 +145,7 @@ port@4 {
 		};
 
 		port@5 {
-			label = "cpu";
+			status = "disabled";
 		};
 
 		port@7 {
@@ -153,7 +153,7 @@ port@7 {
 		};
 
 		port@8 {
-			status = "disabled";
+			label = "cpu";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts
index 8e487f60a2cc..64d3634d130c 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts
@@ -76,7 +76,7 @@ button-restart {
 	};
 };
 
-&gmac0 {
+&gmac2 {
 	nvmem-cells = <&et0macaddr 0>;
 	nvmem-cell-names = "mac-address";
 };
@@ -136,7 +136,7 @@ port@4 {
 		};
 
 		port@5 {
-			label = "cpu";
+			status = "disabled";
 		};
 
 		port@7 {
@@ -144,7 +144,7 @@ port@7 {
 		};
 
 		port@8 {
-			status = "disabled";
+			label = "cpu";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts b/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts
index 08abfdc63d18..890945a5690b 100644
--- a/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts
+++ b/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts
@@ -58,17 +58,17 @@ &uart1 {
 };
 
 &gmac0 {
-	status = "okay";
-
-	nvmem-cells = <&macaddr_board_config_66>;
-	nvmem-cell-names = "mac-address";
+	status = "disabled";
 };
 
 &gmac1 {
 	status = "disabled";
 };
 &gmac2 {
-	status = "disabled";
+	status = "okay";
+
+	nvmem-cells = <&macaddr_board_config_66>;
+	nvmem-cell-names = "mac-address";
 };
 &gmac3 {
 	status = "disabled";
@@ -137,12 +137,7 @@ port@0 {
 		};
 
 		port@5 {
-			label = "cpu";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
+			status = "disabled";
 		};
 
 		port@7 {
@@ -150,7 +145,7 @@ port@7 {
 		};
 
 		port@8 {
-			status = "disabled";
+			label = "cpu";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts
index 45bd27906f29..d6dc448b2849 100644
--- a/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts
+++ b/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts
@@ -104,15 +104,15 @@ &uart2 {
 };
 
 &gmac0 {
-	nvmem-cell-names = "mac-address";
-	nvmem-cells = <&mac_address>;
+	status = "disabled";
 };
 
 &gmac1 {
 	status = "disabled";
 };
 &gmac2 {
-	status = "disabled";
+	nvmem-cell-names = "mac-address";
+	nvmem-cells = <&mac_address>;
 };
 &gmac3 {
 	status = "disabled";
@@ -178,12 +178,7 @@ port@0 {
 		};
 
 		port@5 {
-			label = "cpu";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
+			status = "disabled";
 		};
 
 		port@7 {
@@ -191,7 +186,7 @@ port@7 {
 		};
 
 		port@8 {
-			status = "disabled";
+			label = "cpu";
 		};
 	};
 };
-- 
2.56.1



  parent reply	other threads:[~2026-11-19  8:57 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-19  8:54 [PATCH v2 00/22] ARM: dts: BCM5301X: describe switches and use gmac2 as the CPU port Rosen Penev
2026-11-19  8:54 ` [PATCH v2 01/22] ARM: dts: BCM5301X: AC56U: specify switch Rosen Penev
2026-11-19  8:54 ` [PATCH v2 02/22] ARM: dts: BCM5301X: AC68U: " Rosen Penev
2026-11-19  8:54 ` [PATCH v2 03/22] ARM: dts: BCM5301X: N18U: " Rosen Penev
2026-11-19  8:54 ` [PATCH v2 04/22] ARM: dts: BCM5301X: R7000: " Rosen Penev
2026-11-19  8:54 ` [PATCH v2 05/22] ARM: dts: BCM5301X: EA6300: set gmac2 MAC address from nvram Rosen Penev
2026-11-19  8:54 ` [PATCH v2 06/22] ARM: dts: BCM5301X: EA6300: specify switch Rosen Penev
2026-11-19  8:54 ` [PATCH v2 07/22] ARM: dts: BCM5301X: phicomm-k3: add nvram node Rosen Penev
2026-11-19  8:54 ` [PATCH v2 08/22] ARM: dts: BCM5301X: phicomm-k3: specify switch Rosen Penev
2026-11-19  8:54 ` [PATCH v2 09/22] ARM: dts: BCM5301X: R6300 v2: add nvram node Rosen Penev
2026-11-19  8:54 ` [PATCH v2 10/22] ARM: dts: BCM5301X: R6300 v2: specify switch Rosen Penev
2026-11-19  8:54 ` [PATCH v2 11/22] ARM: dts: BCM5301X: EA6500 v2: add nvram node Rosen Penev
2026-11-19  8:54 ` [PATCH v2 12/22] ARM: dts: BCM5301X: EA6500 v2: specify switch Rosen Penev
2026-11-19  8:54 ` [PATCH v2 13/22] ARM: dts: BCM5301X: R8500: add nvram node Rosen Penev
2026-11-19  8:54 ` [PATCH v2 14/22] ARM: dts: BCM5301X: R8500: specify switch Rosen Penev
2026-11-19  8:54 ` [PATCH v2 15/22] ARM: dts: BCM5301X: WZR-900DHP: " Rosen Penev
2026-11-19  8:54 ` [PATCH v2 16/22] ARM: dts: BCM5301X: WZR-1750DHP: " Rosen Penev
2026-11-19  8:54 ` [PATCH v2 17/22] ARM: dts: BCM5301X: WXR-1900DHP: " Rosen Penev
2026-11-19  8:54 ` [PATCH v2 18/22] ARM: dts: BCM5301X: Archer C5 v2: " Rosen Penev
2026-11-19  8:54 ` [PATCH v2 19/22] ARM: dts: BCM5301X: Archer C9 v1: " Rosen Penev
2026-11-19  8:54 ` [PATCH v2 20/22] ARM: dts: BCM5301X: DIR-885L: use gmac2 Rosen Penev
2026-11-19  8:54 ` Rosen Penev [this message]
2026-11-19  8:54 ` [PATCH v2 22/22] ARM: dts: BCM5301X: enable GMACs in boards that use them Rosen Penev

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261119085452.75708-22-rosenp@gmail.com \
    --to=rosenp@gmail.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=florian.fainelli@broadcom.com \
    --cc=hauke@hauke-m.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=rafal@milecki.pl \
    --cc=robh@kernel.org \
    --cc=zajec5@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox