From: Ivan Pfarher via B4 Relay <devnull+ipfarher.gmail.com@kernel.org>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Chen-Yu Tsai <wens@kernel.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Samuel Holland <samuel@sholland.org>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev, Ivan Pfarher <ipfarher@gmail.com>
Subject: [PATCH 2/4] arm64: dts: allwinner: h5: orangepi-zero-plus2: Add AP6212 Bluetooth
Date: Fri, 20 Nov 2026 12:40:46 +0100 [thread overview]
Message-ID: <20261120-orangepi-zero-plus2-fixes-v1-2-ecd792189f27@gmail.com> (raw)
In-Reply-To: <20261120-orangepi-zero-plus2-fixes-v1-0-ecd792189f27@gmail.com>
From: Ivan Pfarher <ipfarher@gmail.com>
UART1 is connected to the Bluetooth part of the AP6212 module, but the
controller itself is not described, so nothing powers it up and the
kernel never registers it.
Add it as a serdev child of UART1. BT_REG_ON is connected to PA10:
on the board, driving PA10 low makes the controller drop CTS and stop
answering, driving it high brings it back. It uses the same RTC LPO
clock as the WiFi part. The wake-up lines are not described because
they could not be identified.
Tested on an Orange Pi Zero Plus2 (H5) running Linux 6.6.160 with this
change applied: hci_bcm powers the controller, loads
brcm/BCM43430A1.hcd, switches the UART to 1.5 Mbaud and the adapter
works with BlueZ (scan finds nearby devices):
Bluetooth: hci0: BCM43430A1 'brcm/BCM43430A1.hcd' Patch
Bluetooth: hci0: BCM43438A1 26MHz AP6212A1_CL1 BT4.0 OTP-BD-0034
Build-tested only against current mainline.
This problem was investigated, and the patch drafted, in an interactive
session with an AI coding assistant (Claude by Anthropic). The submitter
reviewed the change and ran the tests described above.
Signed-off-by: Ivan Pfarher <ipfarher@gmail.com>
---
.../boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
index 34d6c1468..5697251b9 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
@@ -128,7 +128,18 @@
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ max-speed = <1500000>;
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
+ clock-names = "lpo";
+ vbat-supply = <®_vcc3v3>;
+ vddio-supply = <®_vcc3v3>;
+ shutdown-gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
+ };
};
&usb_otg {
--
2.43.0
next prev parent reply other threads:[~2026-11-20 11:41 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-20 11:40 [PATCH 0/4] arm64: dts: allwinner: h5: orangepi-zero-plus2: Fix Bluetooth and USB gadget Ivan Pfarher via B4 Relay
2026-11-20 11:40 ` [PATCH 1/4] arm64: dts: allwinner: h5: orangepi-zero-plus2: Add LPO clock for AP6212 Ivan Pfarher via B4 Relay
2026-11-20 11:40 ` Ivan Pfarher via B4 Relay [this message]
2026-11-20 11:40 ` [PATCH 3/4] arm64: dts: allwinner: h5: orangepi-zero-plus2: Fix USB peripheral mode Ivan Pfarher via B4 Relay
2026-11-20 11:40 ` [PATCH 4/4] arm64: dts: allwinner: h5: orangepi-zero-plus2: Add MMC aliases Ivan Pfarher via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261120-orangepi-zero-plus2-fixes-v1-2-ecd792189f27@gmail.com \
--to=devnull+ipfarher.gmail.com@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=ipfarher@gmail.com \
--cc=jernej.skrabec@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=robh@kernel.org \
--cc=samuel@sholland.org \
--cc=wens@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox