From: phucduc.bui@gmail.com
To: Mark Brown <broonie@kernel.org>,
Claudiu Beznea <claudiu.beznea@tuxon.dev>,
Andrei Simion <andrei.simion@microchip.com>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
linux-sound@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
bui duc phuc <phucduc.bui@gmail.com>
Subject: [RFC PATCH 2/2] ASoC: atmel: mchp-spdifrx: Preserve MR defaults in hw_params
Date: Fri, 20 Nov 2026 10:59:39 +0700 [thread overview]
Message-ID: <20261120035939.12774-3-phucduc.bui@gmail.com> (raw)
In-Reply-To: <20261120035939.12774-1-phucduc.bui@gmail.com>
From: bui duc phuc <phucduc.bui@gmail.com>
hw_params() overwrites the entire MR register, clearing the
VBMODE and SBMODE bits configured in dai_probe().
Use regmap_update_bits() to update only the ENDIAN and DATAWIDTH
fields, preserving the other MR bits.
Fixes: fa09fa60385a ("ASoC: mchp-spdifrx: fix controls which rely on rsr register")
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
Note:
Hardware testing on SAMA7G5 is needed to verify this change.
If the current full-register write is intentional, the issue
may instead be in the default MR configuration in dai_probe().
sound/soc/atmel/mchp-spdifrx.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/sound/soc/atmel/mchp-spdifrx.c b/sound/soc/atmel/mchp-spdifrx.c
index 06a2a5a90a63..e37470165717 100644
--- a/sound/soc/atmel/mchp-spdifrx.c
+++ b/sound/soc/atmel/mchp-spdifrx.c
@@ -502,7 +502,9 @@ static int mchp_spdifrx_hw_params(struct snd_pcm_substream *substream,
dev_dbg(dev->dev, "GCLK range min set to %d\n",
params_rate(params) * SPDIFRX_GCLK_RATIO_MIN + 1);
- ret = regmap_write(dev->regmap, SPDIFRX_MR, mr);
+ ret = regmap_update_bits(dev->regmap, SPDIFRX_MR,
+ SPDIFRX_MR_ENDIAN_MASK | SPDIFRX_MR_DATAWIDTH_MASK,
+ mr);
unlock:
mutex_unlock(&dev->mlock);
--
2.43.0
prev parent reply other threads:[~2026-11-20 4:00 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-20 3:59 [RFC PATCH 0/2] ASoC: atmel: mchp-spdifrx: Fix format handling and MR configuration phucduc.bui
2026-11-20 3:59 ` [RFC PATCH 1/2] ASoC: atmel: mchp-spdifrx: Fix 16-bit big-endian format check phucduc.bui
2026-11-20 3:59 ` phucduc.bui [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261120035939.12774-3-phucduc.bui@gmail.com \
--to=phucduc.bui@gmail.com \
--cc=alexandre.belloni@bootlin.com \
--cc=andrei.simion@microchip.com \
--cc=broonie@kernel.org \
--cc=claudiu.beznea@tuxon.dev \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox