Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Arun Iyengar via B4 Relay <devnull+aiyengar1990.gmail.com@kernel.org>
To: Mauro Carvalho Chehab <mchehab@kernel.org>,
	 Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	Heiko Stuebner <heiko@sntech.de>,
	 Philipp Zabel <p.zabel@pengutronix.de>
Cc: linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org,
	 devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	 linux-kernel@vger.kernel.org, Hans Verkuil <hverkuil@kernel.org>,
	 Nicolas Dufresne <nicolas.dufresne@collabora.com>,
	 Alex Bee <knaerzche@gmail.com>,
	 Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>,
	 Arun Iyengar <aiyengar1990@gmail.com>
Subject: [PATCH v4 0/3] media: rockchip: Add the IEP2 deinterlacer of RK3568/RK3588
Date: Sat, 21 Nov 2026 14:25:36 +0000	[thread overview]
Message-ID: <20261121-iep2-v4-0-760cf25f322b@gmail.com> (raw)

Add a V4L2 mem2mem driver for the IEP2 deinterlacer of the RK3568 and
RK3588, with its binding and the RK3588 DT node. The V4L2 side follows
Alex Bee's IEP driver.

Tested on an Orange Pi 5 (RK3588S) with a 7.3-based kernel (KASAN,
lockdep); build-tested on media next. v4l2-compliance 59/59, all four
modes at 1080i without IOMMU faults, s2idle and deep suspend while
streaming, unbind while streaming, forced watchdog and IOMMU fault
resets. Not tested: RK3568. DMABUF imports of exactly the image size
are refused, because of the 4 KiB OUTPUT padding (see 2/3).

One case is still open: a reset during a transfer, seen only with
forced watchdog resets, can leave the IOMMU busy. Jobs then fail
without DMA and the driver suspends at once so that PD_VDPU powers
off, which restores it. While another device of the domain, e.g. a
video decoder, keeps it on, the jobs keep failing.

Developed with Claude (Anthropic), which wrote the code and the commit
messages. I reviewed every change.

---
Changes in v4:
- 2/3: fail the probe if the IOMMU domain allocation fails (Sashiko)
- Link to v3: https://patch.msgid.link/20261120-iep2-v3-0-e94eb9f629d2@gmail.com

---
Arun Iyengar (3):
      media: dt-bindings: Add Rockchip IEP2 deinterlacer
      media: rockchip: Add IEP2 deinterlacer driver
      arm64: dts: rockchip: Add IEP2 deinterlacer to RK3588

 Documentation/admin-guide/media/rockchip-iep2.rst  |   32 +
 Documentation/admin-guide/media/v4l-drivers.rst    |    1 +
 .../bindings/media/rockchip,rk3568-iep2.yaml       |   95 ++
 MAINTAINERS                                        |    8 +
 arch/arm64/boot/dts/rockchip/rk3588-base.dtsi      |   22 +
 drivers/media/platform/rockchip/Kconfig            |    1 +
 drivers/media/platform/rockchip/Makefile           |    1 +
 drivers/media/platform/rockchip/iep2/Kconfig       |   16 +
 drivers/media/platform/rockchip/iep2/Makefile      |    3 +
 drivers/media/platform/rockchip/iep2/iep2-regs.h   |  191 +++
 drivers/media/platform/rockchip/iep2/iep2.c        | 1319 ++++++++++++++++++++
 drivers/media/platform/rockchip/iep2/iep2.h        |  108 ++
 12 files changed, 1797 insertions(+)
---
base-commit: ccf78740d63813c452c035b57d17a650492562fa
change-id: 20261110-iep2-b9a9c6e77c44

Best regards,
--  
Arun Iyengar <aiyengar1990@gmail.com>




             reply	other threads:[~2026-11-21 14:25 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-21 14:25 Arun Iyengar via B4 Relay [this message]
2026-11-21 14:25 ` [PATCH v4 1/3] media: dt-bindings: Add Rockchip IEP2 deinterlacer Arun Iyengar via B4 Relay
2026-11-21 14:25 ` [PATCH v4 2/3] media: rockchip: Add IEP2 deinterlacer driver Arun Iyengar via B4 Relay
2026-11-21 14:25 ` [PATCH v4 3/3] arm64: dts: rockchip: Add IEP2 deinterlacer to RK3588 Arun Iyengar via B4 Relay

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261121-iep2-v4-0-760cf25f322b@gmail.com \
    --to=devnull+aiyengar1990.gmail.com@kernel.org \
    --cc=aiyengar1990@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=hverkuil@kernel.org \
    --cc=knaerzche@gmail.com \
    --cc=krzk+dt@kernel.org \
    --cc=krzysztof.kozlowski@oss.qualcomm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mchehab@kernel.org \
    --cc=nicolas.dufresne@collabora.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox