From: David Yang <mmyangfl@gmail.com>
To: linux-watchdog@vger.kernel.org
Cc: David Yang <mmyangfl@gmail.com>,
Wim Van Sebroeck <wim@linux-watchdog.org>,
Guenter Roeck <linux@roeck-us.net>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Wei Xu <xuwei5@hisilicon.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/4] watchdog: histb: Add HiSilicon STB watchdog driver
Date: Sun, 22 Nov 2026 14:55:21 +0800 [thread overview]
Message-ID: <20261122065549.3265519-3-mmyangfl@gmail.com> (raw)
In-Reply-To: <20261122065549.3265519-1-mmyangfl@gmail.com>
The watchdog controller integrated on HiSilicon STB SoCs shares register
offsets with the ARM PrimeCell SP805, but differs in several critical
behaviors. Add a dedicated platform driver to handle these SoC-specific
semantics natively without regressing generic SP805 users.
Signed-off-by: David Yang <mmyangfl@gmail.com>
---
drivers/watchdog/Kconfig | 8 +
drivers/watchdog/Makefile | 1 +
drivers/watchdog/histb_wdt.c | 287 +++++++++++++++++++++++++++++++++++
3 files changed, 296 insertions(+)
create mode 100644 drivers/watchdog/histb_wdt.c
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index f7d0a0c2c0ef..d3421bb76326 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1183,6 +1183,14 @@ config SUNPLUS_WATCHDOG
To compile this driver as a module, choose M here: the
module will be called sunplus_wdt.
+config HISTB_WATCHDOG
+ tristate "HiSilicon STB Watchdog"
+ depends on (ARCH_HISI || COMPILE_TEST) && OF
+ select WATCHDOG_CORE
+ help
+ Say Y here to include support for the watchdog timer in HiSilicon STB
+ SoCs.
+
# X86 (i386 + ia64 + x86_64) Architecture
config ACQUIRE_WDT
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 9ac406677aba..d2455e54ab23 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -106,6 +106,7 @@ obj-$(CONFIG_SUNPLUS_WATCHDOG) += sunplus_wdt.o
obj-$(CONFIG_MARVELL_GTI_WDT) += marvell_gti_wdt.o
obj-$(CONFIG_GUNYAH_WATCHDOG) += gunyah_wdt.o
obj-$(CONFIG_MA35D1_WDT) += ma35d1_wdt.o
+obj-$(CONFIG_HISTB_WATCHDOG) += histb_wdt.o
# X86 (i386 + ia64 + x86_64) Architecture
obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
diff --git a/drivers/watchdog/histb_wdt.c b/drivers/watchdog/histb_wdt.c
new file mode 100644
index 000000000000..1961981f1e5d
--- /dev/null
+++ b/drivers/watchdog/histb_wdt.c
@@ -0,0 +1,287 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * HiSilicon STB Watchdog Driver
+ *
+ * The watchdog controller integrated on HiSilicon STB SoCs shares register
+ * offsets with the ARM PrimeCell SP805, but differs in several critical
+ * hardware behaviors:
+ * - The ID registers at 0xfe0..0xffc are unimplemented and read zero,
+ * requiring a platform device driver rather than AMBA probe;
+ * - Writing WDTLOCK freezes the counter instead of only blocking register
+ * writes, so the block must remain unlocked while running;
+ * - Writing WDTLOAD never reloads the running counter; only WDTINTCLR does;
+ * - Writing WDTLOAD with 0 results in a counter starting at 0xffffffff,
+ * resetting after 2*178.6s (~6min) at 24 MHz;
+ * - The counter only advances while unlocked and INT_ENABLE is set.
+ *
+ * Copyright (c) 2026 David Yang <mmyangfl@gmail.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/spinlock.h>
+#include <linux/watchdog.h>
+
+#define HISTB_WDT_LOAD 0x000
+#define HISTB_WDT_VALUE 0x004
+#define HISTB_WDT_CONTROL 0x008
+#define HISTB_WDT_RESET_ENABLE BIT(1)
+#define HISTB_WDT_INT_ENABLE BIT(0)
+#define HISTB_WDT_INTCLR 0x00c
+#define HISTB_WDT_RIS 0x010
+#define HISTB_WDT_MIS 0x014
+#define HISTB_WDT_INT_MASK BIT(0)
+#define HISTB_WDT_LOCK 0xc00
+#define HISTB_WDT_UNLOCK_KEY 0x1acce551
+#define HISTB_WDT_LOCK_KEY 0x00000001
+
+#define MHz 1000000
+
+#define HISTB_WDT_DEFAULT_TIMEOUT 60
+
+struct histb_wdt {
+ struct watchdog_device wdd;
+
+ void __iomem *base;
+ struct clk *clk;
+ spinlock_t lock;
+
+ u32 rate;
+ u32 load_val;
+};
+
+static void histb_wdt_arm(struct histb_wdt *wdt, u32 load)
+{
+ void __iomem *base = wdt->base;
+
+ spin_lock(&wdt->lock);
+ writel_relaxed(HISTB_WDT_UNLOCK_KEY, base + HISTB_WDT_LOCK);
+ writel_relaxed(0, base + HISTB_WDT_CONTROL);
+ writel_relaxed(HISTB_WDT_INT_MASK, base + HISTB_WDT_INTCLR);
+ writel_relaxed(load, base + HISTB_WDT_LOAD);
+ writel_relaxed(HISTB_WDT_INT_ENABLE | HISTB_WDT_RESET_ENABLE,
+ base + HISTB_WDT_CONTROL);
+ readl_relaxed(base + HISTB_WDT_LOCK);
+ spin_unlock(&wdt->lock);
+}
+
+static int histb_wdt_start(struct watchdog_device *wdd)
+{
+ struct histb_wdt *wdt = watchdog_get_drvdata(wdd);
+ int res;
+
+ res = clk_enable(wdt->clk);
+ if (res)
+ return res;
+
+ histb_wdt_arm(wdt, wdt->load_val);
+
+ return 0;
+}
+
+static int histb_wdt_stop(struct watchdog_device *wdd)
+{
+ struct histb_wdt *wdt = watchdog_get_drvdata(wdd);
+ void __iomem *base = wdt->base;
+
+ spin_lock(&wdt->lock);
+ writel_relaxed(HISTB_WDT_UNLOCK_KEY, base + HISTB_WDT_LOCK);
+ writel_relaxed(0, base + HISTB_WDT_CONTROL);
+ writel_relaxed(HISTB_WDT_LOCK_KEY, base + HISTB_WDT_LOCK);
+ readl_relaxed(base + HISTB_WDT_LOCK);
+ spin_unlock(&wdt->lock);
+
+ clk_disable(wdt->clk);
+
+ return 0;
+}
+
+static int histb_wdt_ping(struct watchdog_device *wdd)
+{
+ struct histb_wdt *wdt = watchdog_get_drvdata(wdd);
+ void __iomem *base = wdt->base;
+
+ spin_lock(&wdt->lock);
+ writel_relaxed(HISTB_WDT_INT_MASK, base + HISTB_WDT_INTCLR);
+ writel_relaxed(wdt->load_val, base + HISTB_WDT_LOAD);
+ readl_relaxed(base + HISTB_WDT_LOCK);
+ spin_unlock(&wdt->lock);
+
+ return 0;
+}
+
+static int
+histb_wdt_set_timeout(struct watchdog_device *wdd, unsigned int timeout)
+{
+ struct histb_wdt *wdt = watchdog_get_drvdata(wdd);
+ u64 load;
+
+ /*
+ * Counter decrements twice: interrupt at underflow 1, reset at
+ * underflow 2 if unclaimed. Timeout is two windows.
+ */
+ load = div_u64((u64)wdt->rate * timeout, 2) - 1;
+ load = clamp_val(load, 1, 0xffffffff);
+
+ wdt->load_val = load;
+ wdd->timeout = div_u64(((u64)load + 1) * 2 + (wdt->rate / 2),
+ wdt->rate);
+
+ if (watchdog_active(wdd))
+ histb_wdt_arm(wdt, wdt->load_val);
+
+ return 0;
+}
+
+static unsigned int histb_wdt_get_timeleft(struct watchdog_device *wdd)
+{
+ struct histb_wdt *wdt = watchdog_get_drvdata(wdd);
+ u64 value;
+
+ spin_lock(&wdt->lock);
+ value = readl_relaxed(wdt->base + HISTB_WDT_VALUE);
+ if (!(readl_relaxed(wdt->base + HISTB_WDT_RIS) & HISTB_WDT_INT_MASK))
+ value += (u64)wdt->load_val + 1;
+ spin_unlock(&wdt->lock);
+
+ return div_u64(value, wdt->rate);
+}
+
+static int
+histb_wdt_restart(struct watchdog_device *wdd, unsigned long mode, void *cmd)
+{
+ struct histb_wdt *wdt = watchdog_get_drvdata(wdd);
+
+ /*
+ * For reset, we start the WDT clock and leave it running.
+ * The clock was prepared at probe time; only clk_enable() is
+ * safe in this atomic (restart notifier) context.
+ */
+ clk_enable(wdt->clk);
+ histb_wdt_arm(wdt, 1);
+
+ mdelay(1);
+
+ return 0;
+}
+
+static const struct watchdog_info histb_wdt_info = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+ .identity = "HiSilicon STB Watchdog",
+};
+
+static const struct watchdog_ops histb_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = histb_wdt_start,
+ .stop = histb_wdt_stop,
+ .ping = histb_wdt_ping,
+ .set_timeout = histb_wdt_set_timeout,
+ .get_timeleft = histb_wdt_get_timeleft,
+ .restart = histb_wdt_restart,
+};
+
+static int histb_wdt_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct histb_wdt *wdt;
+ int res;
+
+ wdt = devm_kzalloc_obj(dev, *wdt);
+ if (!wdt)
+ return -ENOMEM;
+
+ wdt->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(wdt->base))
+ return PTR_ERR(wdt->base);
+
+ /*
+ * Keep the clock prepared for the lifetime of the driver:
+ * .restart() runs in atomic context and may only call clk_enable().
+ */
+ wdt->clk = devm_clk_get_optional_prepared(dev, NULL);
+ if (IS_ERR(wdt->clk))
+ return dev_err_probe(dev, PTR_ERR(wdt->clk),
+ "Failed to get clock\n");
+
+ if (wdt->clk)
+ wdt->rate = clk_get_rate(wdt->clk);
+ if (!wdt->rate)
+ device_property_read_u32(dev, "clock-frequency", &wdt->rate);
+ if (!wdt->rate)
+ /* 24 MHz crystal clock default on HiSTB */
+ wdt->rate = 24 * MHz;
+
+ spin_lock_init(&wdt->lock);
+
+ wdt->wdd.info = &histb_wdt_info;
+ wdt->wdd.ops = &histb_wdt_ops;
+ wdt->wdd.parent = dev;
+ wdt->wdd.min_timeout = 1;
+ wdt->wdd.max_timeout = div_u64(((u64)U32_MAX + 1) * 2, wdt->rate);
+ wdt->wdd.timeout = HISTB_WDT_DEFAULT_TIMEOUT;
+
+ watchdog_set_drvdata(&wdt->wdd, wdt);
+ watchdog_init_timeout(&wdt->wdd, 0, dev);
+ histb_wdt_set_timeout(&wdt->wdd, wdt->wdd.timeout);
+
+ watchdog_stop_on_reboot(&wdt->wdd);
+ platform_set_drvdata(pdev, wdt);
+
+ res = devm_watchdog_register_device(dev, &wdt->wdd);
+ if (res)
+ return dev_err_probe(dev, res,
+ "Failed to register watchdog device\n");
+
+ return 0;
+}
+
+static int __maybe_unused histb_wdt_suspend(struct device *dev)
+{
+ struct histb_wdt *wdt = dev_get_drvdata(dev);
+
+ if (watchdog_active(&wdt->wdd))
+ histb_wdt_stop(&wdt->wdd);
+
+ return 0;
+}
+
+static int __maybe_unused histb_wdt_resume(struct device *dev)
+{
+ struct histb_wdt *wdt = dev_get_drvdata(dev);
+
+ if (watchdog_active(&wdt->wdd))
+ histb_wdt_start(&wdt->wdd);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(histb_wdt_pm_ops, histb_wdt_suspend, histb_wdt_resume);
+
+static const struct of_device_id histb_wdt_match[] = {
+ { .compatible = "hisilicon,histb-wdt" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, histb_wdt_match);
+
+static struct platform_driver histb_wdt_driver = {
+ .probe = histb_wdt_probe,
+ .driver = {
+ .name = "histb-wdt",
+ .pm = &histb_wdt_pm_ops,
+ .of_match_table = histb_wdt_match,
+ },
+};
+module_platform_driver(histb_wdt_driver);
+
+MODULE_AUTHOR("David Yang <mmyangfl@gmail.com>");
+MODULE_DESCRIPTION("HiSilicon STB Watchdog Driver");
+MODULE_LICENSE("Dual MIT/GPL");
--
2.53.0
next prev parent reply other threads:[~2026-11-22 6:58 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-22 6:55 [PATCH 0/4] watchdog: histb: Add HiSilicon STB watchdog driver David Yang
2026-11-22 6:55 ` [PATCH 1/4] dt-bindings: watchdog: Add HiSilicon STB watchdog binding David Yang
2026-11-22 6:55 ` David Yang [this message]
2026-11-22 6:55 ` [PATCH 3/4] arm64: dts: hisilicon: hi3798cv200: Add watchdog node David Yang
2026-11-22 6:55 ` [PATCH 4/4] MAINTAINERS: Add HiSilicon STB drivers entry David Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261122065549.3265519-3-mmyangfl@gmail.com \
--to=mmyangfl@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robh@kernel.org \
--cc=wim@linux-watchdog.org \
--cc=xuwei5@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox