From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
To: Ulf Hansson <ulfh@kernel.org>
Cc: "Lucas Stach" <l.stach@pengutronix.de>,
linux-amarula@amarulasolutions.com, michael@amarulasolutions.com,
"Peng Fan" <peng.fan@nxp.com>,
"Dario Binacchi" <dario.binacchi@amarulasolutions.com>,
"Fabio Estevam" <festevam@gmail.com>,
"Frank Li" <Frank.Li@nxp.com>, "Jacky Bai" <ping.bai@nxp.com>,
"Kees Cook" <kees+treewide@kernel.org>,
"Marek Vasut" <marex@denx.de>,
"Ming Qian" <ming.qian@oss.nxp.com>,
"Pengutronix Kernel Team" <kernel@pengutronix.de>,
"Rafael J. Wysocki" <rafael.j.wysocki@intel.com>,
"Sascha Hauer" <s.hauer@pengutronix.de>,
"Shawn Guo" <shawnguo@kernel.org>,
"Uwe Kleine-König" <u.kleine-koenig@baylibre.com>,
"Xu Yang" <xu.yang_2@nxp.com>,
"bui duc phuc" <phucduc.bui@gmail.com>,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
linux-pm@vger.kernel.org
Subject: [PATCH v4 0/4] pmdomain: imx: Keep the domains left on by the bootloader
Date: Sun, 22 Nov 2026 21:51:09 +0100 [thread overview]
Message-ID: <20261122205136.138173-1-dario.binacchi@amarulasolutions.com> (raw)
The i.MX8M power domain drivers register all their domains as off.
A domain left on by the bootloader, e.g. to show a splash screen, is
then powered up again by its first consumer, which on the i.MX8MN
turns the display off and hangs the system.
This series reads the state of the domains from the hardware, so that
the ones left on are kept on until their consumers have probed.
The first patch fixes an error path of the blk-ctrl probe. The clocks
held by the last patch are released at sync_state, so they stay on
until all the consumers of the blk-ctrl have probed.
Tested on i.MX8MN (BSH SMM S2 PRO).
Changes in v4:
- Register the power notifier before powering up the bus domain
Changes in v3:
- Add Reported-by and Closes tags
- Drop the runtime PM reference synchronously in the probe error path
- Keep the bus domain on while the state of the domains is read
- Remove the domains before releasing their boot-on references
Changes in v2:
- New patch
- Release the resources of the domains left on when the driver is
removed
- Take the references once the probe can no longer be deferred
- Clear the boot-on state when the domain is powered off
- Release the references when the driver is removed
- Rebase on the changes of the previous patch
Dario Binacchi (4):
pmdomain: imx8m-blk-ctrl: Remove the power notifier on probe failure
pmdomain: imx: gpcv2: Keep the domains left on by the bootloader
pmdomain: imx8m-blk-ctrl: Keep the domains left on by the bootloader
pmdomain: imx8m-blk-ctrl: Hold boot-on domain clocks until sync_state
drivers/pmdomain/imx/gpcv2.c | 77 ++++++++++++-
drivers/pmdomain/imx/imx8m-blk-ctrl.c | 156 ++++++++++++++++++++++++--
2 files changed, 223 insertions(+), 10 deletions(-)
---
base-commit: d0f871bfb831705d9f55479f5b2b40f636ea7b16
branch: imx-pmdomain-boot-on-v4
--
2.43.0
next reply other threads:[~2026-11-22 20:52 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-22 20:51 Dario Binacchi [this message]
2026-11-22 20:51 ` [PATCH v4 1/4] pmdomain: imx8m-blk-ctrl: Remove the power notifier on probe failure Dario Binacchi
2026-11-22 20:51 ` [PATCH v4 2/4] pmdomain: imx: gpcv2: Keep the domains left on by the bootloader Dario Binacchi
2026-11-22 20:51 ` [PATCH v4 3/4] pmdomain: imx8m-blk-ctrl: " Dario Binacchi
2026-11-22 20:51 ` [PATCH v4 4/4] pmdomain: imx8m-blk-ctrl: Hold boot-on domain clocks until sync_state Dario Binacchi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261122205136.138173-1-dario.binacchi@amarulasolutions.com \
--to=dario.binacchi@amarulasolutions.com \
--cc=Frank.Li@nxp.com \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kees+treewide@kernel.org \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=linux-amarula@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=marex@denx.de \
--cc=michael@amarulasolutions.com \
--cc=ming.qian@oss.nxp.com \
--cc=peng.fan@nxp.com \
--cc=phucduc.bui@gmail.com \
--cc=ping.bai@nxp.com \
--cc=rafael.j.wysocki@intel.com \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=u.kleine-koenig@baylibre.com \
--cc=ulfh@kernel.org \
--cc=xu.yang_2@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox