public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: laurent.pinchart@ideasonboard.com (Laurent Pinchart)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH/RFT v2 0/8] Add SDHI to r8a7796/salvator-x
Date: Tue, 06 Sep 2016 03:34:41 +0300	[thread overview]
Message-ID: <2032317.SOiUovHhFZ@avalon> (raw)
In-Reply-To: <1471938590-10650-1-git-send-email-horms+renesas@verge.net.au>

Hi Simon,

Thank you for the patches.

On Tuesday 23 Aug 2016 09:49:42 Simon Horman wrote:
> Hi,
> 
> this patch set updates drivers, documentation and DT to
> enable SDHI0 & 3 on the r8a7796/salvator-x. This includes
> defining nodes for all available SDHI and GPIO devices.
> 
> I have boot-tested this which seems successful.
> However, I do not have physical access to an r8a7796/salvator-x board
> and the one that I have remote access to does not appear to have
> any SD cards present. I would be grateful of any testing anyone
> can provide.
> 
> Based on renesas-drivers-2016-08-09-v4.8-rc1

For patches 1/8, 4/8 and 6/8, applied on top of your devel branch (with the 
gpio-ranges property removed from 6/8 due to the lack of PFC support),

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

I've tested the patches with ethernet support that uses GPIO-2-11 as an 
interrupt pin (I'll post the ethernet patches for r8a7796 soon).

> Provided for testing as the topic/r8a7796-sdhi-v2 branch in
> my renesas tree on kernel.org.
> 
> Changes since v1 noted in individual changelogs.
> Acks from v1 also added.
> 
> Ai Kyuse (1):
>   mmc: sh_mobile_sdhi: Add r8a7796 support
> 
> Simon Horman (4):
>   clk: renesas: r8a7796: Add SDIF clocks
>   gpio: rcar: Add r8a7796 (R-Car M3-W) support
>   arm64: dts: r8a7796: add SDHI nodes
>   arm64: dts: r8a7796: salvator-x: enable SDHI0 & 3
> 
> Takeshi Kihara (3):
>   clk: renesas: r8a7796: Add GPIO clocks
>   pinctrl: sh-pfc: r8a7796: Add SDHI pins, groups and functions
>   arm64: dts: r8a7796: Add GPIO device nodes
> 
>  .../devicetree/bindings/gpio/renesas,gpio-rcar.txt |   1 +
>  Documentation/devicetree/bindings/mmc/tmio_mmc.txt |   1 +
>  arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts |  84 +++++++
>  arch/arm64/boot/dts/renesas/r8a7796.dtsi           | 154 ++++++++++++
>  drivers/clk/renesas/r8a7796-cpg-mssr.c             |  18 ++
>  drivers/gpio/gpio-rcar.c                           |   4 +
>  drivers/mmc/host/sh_mobile_sdhi.c                  |   1 +
>  drivers/pinctrl/sh-pfc/pfc-r8a7796.c               | 275 ++++++++++++++++++
>  8 files changed, 538 insertions(+)

-- 
Regards,

Laurent Pinchart

  parent reply	other threads:[~2016-09-06  0:34 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-23  7:49 [PATCH/RFT v2 0/8] Add SDHI to r8a7796/salvator-x Simon Horman
2016-08-23  7:49 ` [PATCH/RFT v2 1/8] clk: renesas: r8a7796: Add GPIO clocks Simon Horman
2016-08-23  7:49 ` [PATCH/RFT v2 2/8] clk: renesas: r8a7796: Add SDIF clocks Simon Horman
2016-08-23  7:49 ` [PATCH/RFT v2 3/8] pinctrl: sh-pfc: r8a7796: Add SDHI pins, groups and functions Simon Horman
2016-08-23  7:49 ` [PATCH/RFT v2 4/8] gpio: rcar: Add r8a7796 (R-Car M3-W) support Simon Horman
2016-08-23  8:28   ` Geert Uytterhoeven
2016-08-23  7:49 ` [PATCH/RFT v2 5/8] mmc: sh_mobile_sdhi: Add r8a7796 support Simon Horman
2016-08-23  7:49 ` [PATCH/RFT v2 6/8] arm64: dts: r8a7796: Add GPIO device nodes Simon Horman
2016-08-23  7:49 ` [PATCH/RFT v2 7/8] arm64: dts: r8a7796: add SDHI nodes Simon Horman
2016-08-23  7:49 ` [PATCH/RFT v2 8/8] arm64: dts: r8a7796: salvator-x: enable SDHI0 & 3 Simon Horman
2016-08-29 14:04 ` [PATCH/RFT v2 0/8] Add SDHI to r8a7796/salvator-x Simon Horman
2016-09-06  0:34 ` Laurent Pinchart [this message]
2016-09-06  7:49   ` Simon Horman
2016-09-06 10:47     ` Simon Horman
2016-09-06 11:21       ` Simon Horman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2032317.SOiUovHhFZ@avalon \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox