From: heiko@sntech.de (Heiko Stübner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/5] ARM: S3C24XX: convert s3c2412 to common clock framework
Date: Sun, 23 Feb 2014 01:29:20 +0100 [thread overview]
Message-ID: <2112473.9LIChJWDSQ@phil> (raw)
In-Reply-To: <530937A4.3010301@gmail.com>
Hi Tomasz,
Am Sonntag, 23. Februar 2014, 00:49:56 schrieb Tomasz Figa:
> Hi,
>
> On 22.02.2014 23:45, Heiko St?bner wrote:
> > Second incarnation of the series converting s3c2412/s3c2413 to the common
> > clock framework. As before the conversion is done by a mix of datasheet
> > data and the pre-existing clock code and as this time I have no hardware
> > of this type, it is compile-tested only. So hopefully somebody with
> > s3c2412
> > hw will be able to test it for real.
> >
> > The conversion of s3c2412 now moved in front of the
> > s3c2410/s3c2440/s3c2442
> > one, as I'll need a bit more time for the clockout changes suggested by
> > Tomasz Figa.
> >
> > This series builds on top of the previous submitted s3c2443/s3c2416
> > series.
> >
> >
> > Changes since v1:
> > - move in front of s3c2410 conversion, therefore move 2 necessary patches
> >
> > that also got ACKs, from there into this series
> >
> > - adapt to Samsung clock pm rework from Tomasz Figa
> > - apply some changes suggested by Tomasz Figa in the s3c2410 clock driver
> >
> > that also apply to this driver.
> >
> > Heiko Stuebner (5):
> > ARM: S3C24XX: only store clock registers when old clock code is active
> > clk: samsung: add plls used by the early s3c24xx cpus
> > dt-bindings: add documentation for s3c2412 clock controller
> > clk: samsung: add clock controller driver for s3c2412
> > ARM: S3C24XX: convert s3c2412 to common clock framework
> >
> > .../bindings/clock/samsung,s3c2412-clock.txt | 50 ++
> > arch/arm/mach-s3c24xx/Kconfig | 8 +-
> > arch/arm/mach-s3c24xx/Makefile | 2 +-
> > arch/arm/mach-s3c24xx/clock-s3c2412.c | 761
> > --------------------- arch/arm/mach-s3c24xx/common.c
> > | 9 +-
> > arch/arm/mach-s3c24xx/common.h | 4 +
> > arch/arm/mach-s3c24xx/mach-jive.c | 9 +-
> > arch/arm/mach-s3c24xx/mach-smdk2413.c | 9 +-
> > arch/arm/mach-s3c24xx/mach-vstms.c | 9 +-
> > arch/arm/mach-s3c24xx/pm.c | 13 +-
> > arch/arm/mach-s3c24xx/s3c2412.c | 43 --
> > drivers/clk/samsung/Makefile | 1 +
> > drivers/clk/samsung/clk-pll.c | 182 +++++
> > drivers/clk/samsung/clk-pll.h | 3 +
> > drivers/clk/samsung/clk-s3c2412.c | 268 ++++++++
> > include/dt-bindings/clock/s3c2412.h | 73 ++
> > 16 files changed, 627 insertions(+), 817 deletions(-)
> > create mode 100644
> > Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt
> > delete mode 100644 arch/arm/mach-s3c24xx/clock-s3c2412.c
> > create mode 100644 drivers/clk/samsung/clk-s3c2412.c
> > create mode 100644 include/dt-bindings/clock/s3c2412.h
>
> For mach and DT patches:
>
> Reviewed-by: Tomasz Figa <t.figa@samsung.com>
>
> Kukjin, I'll take binding and clock patches to Samsung clock tree as
> soon as DT bindings get acked by one of DT maintainers. I will prepare a
> branch for you to apply mach patches on top. Is it fine for you?
I think Kukjin already applied the s3c2416/s3c2443 series on top of your
clock-pm-changes in the linux-samsung tree [1], so it might be best to just
pile this series on top of it.
Heiko
[1] https://git.kernel.org/cgit/linux/kernel/git/kgene/linux-samsung.git/?h=v3.15-next/clk-s3c24xx
next prev parent reply other threads:[~2014-02-23 0:29 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-22 22:45 [PATCH v2 0/5] ARM: S3C24XX: convert s3c2412 to common clock framework Heiko Stübner
2014-02-22 22:45 ` [PATCH v2 1/5] ARM: S3C24XX: only store clock registers when old clock code is active Heiko Stübner
2014-02-22 22:46 ` [PATCH v2 2/5] clk: samsung: add plls used by the early s3c24xx cpus Heiko Stübner
2014-02-22 22:48 ` [PATCH v2 3/5] dt-bindings: add documentation for s3c2412 clock controller Heiko Stübner
2014-02-22 22:49 ` [PATCH v2 4/5] clk: samsung: add clock controller driver for s3c2412 Heiko Stübner
2014-02-22 22:50 ` [PATCH v2 5/5] ARM: S3C24XX: convert s3c2412 to common clock framework Heiko Stübner
2014-02-22 23:49 ` [PATCH v2 0/5] " Tomasz Figa
2014-02-23 0:29 ` Heiko Stübner [this message]
2014-02-23 0:48 ` Tomasz Figa
2014-02-24 0:06 ` Mike Turquette
2014-02-25 0:45 ` Kukjin Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2112473.9LIChJWDSQ@phil \
--to=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).