[RESEND] clocksource: sun4i: add definition of clear interrupt

[RESEND] clocksource: sun4i: add definition of clear interrupt

[Victor Hassan]

To prevent misunderstanding, use TIMER_IRQ_CLEAR instead of TIMER_IRQ_EN
in function sun4i_timer_clear_interrupt.

Signed-off-by: Victor Hassan <victor@allwinnertech.com>
---
 drivers/clocksource/timer-sun4i.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clocksource/timer-sun4i.c b/drivers/clocksource/timer-sun4i.c
index 94dc6e42e983..e5a70aa1deb4 100644
--- a/drivers/clocksource/timer-sun4i.c
+++ b/drivers/clocksource/timer-sun4i.c
@@ -26,6 +26,7 @@
 #define TIMER_IRQ_EN_REG	0x00
 #define TIMER_IRQ_EN(val)		BIT(val)
 #define TIMER_IRQ_ST_REG	0x04
+#define TIMER_IRQ_CLEAR(val)		BIT(val)
 #define TIMER_CTL_REG(val)	(0x10 * val + 0x10)
 #define TIMER_CTL_ENABLE		BIT(0)
 #define TIMER_CTL_RELOAD		BIT(1)
@@ -123,7 +124,7 @@ static int sun4i_clkevt_next_event(unsigned long evt,
 
 static void sun4i_timer_clear_interrupt(void __iomem *base)
 {
-	writel(TIMER_IRQ_EN(0), base + TIMER_IRQ_ST_REG);
+	writel(TIMER_IRQ_CLEAR(0), base + TIMER_IRQ_ST_REG);
 }
 
 static irqreturn_t sun4i_timer_interrupt(int irq, void *dev_id)
-- 
2.29.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [RESEND] clocksource: sun4i: add definition of clear interrupt

[Jernej Škrabec]

Dne torek, 06. september 2022 ob 07:20:56 CEST je Victor Hassan napisal(a):
> To prevent misunderstanding, use TIMER_IRQ_CLEAR instead of TIMER_IRQ_EN
> in function sun4i_timer_clear_interrupt.
> 
> Signed-off-by: Victor Hassan <victor@allwinnertech.com>

Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>

Best regards,
Jernej

> ---
>  drivers/clocksource/timer-sun4i.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clocksource/timer-sun4i.c
> b/drivers/clocksource/timer-sun4i.c index 94dc6e42e983..e5a70aa1deb4 100644
> --- a/drivers/clocksource/timer-sun4i.c
> +++ b/drivers/clocksource/timer-sun4i.c
> @@ -26,6 +26,7 @@
>  #define TIMER_IRQ_EN_REG	0x00
>  #define TIMER_IRQ_EN(val)		BIT(val)
>  #define TIMER_IRQ_ST_REG	0x04
> +#define TIMER_IRQ_CLEAR(val)		BIT(val)
>  #define TIMER_CTL_REG(val)	(0x10 * val + 0x10)
>  #define TIMER_CTL_ENABLE		BIT(0)
>  #define TIMER_CTL_RELOAD		BIT(1)
> @@ -123,7 +124,7 @@ static int sun4i_clkevt_next_event(unsigned long evt,
> 
>  static void sun4i_timer_clear_interrupt(void __iomem *base)
>  {
> -	writel(TIMER_IRQ_EN(0), base + TIMER_IRQ_ST_REG);
> +	writel(TIMER_IRQ_CLEAR(0), base + TIMER_IRQ_ST_REG);
>  }
> 
>  static irqreturn_t sun4i_timer_interrupt(int irq, void *dev_id)
> --
> 2.29.0



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [RESEND] clocksource: sun4i: add definition of clear interrupt

[Daniel Lezcano]

On 06/09/2022 07:20, Victor Hassan wrote:
> To prevent misunderstanding, use TIMER_IRQ_CLEAR instead of TIMER_IRQ_EN
> in function sun4i_timer_clear_interrupt.
> 
> Signed-off-by: Victor Hassan <victor@allwinnertech.com>
> ---

Applied, thanks


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel