[PATCH 0/2] ARM: shmobile: marzen: defconfig updates for v3.10

[PATCH 0/2] ARM: shmobile: marzen: defconfig updates for v3.10

[Simon Horman]

Hi,

the this short series updates the defconfig for marzen for changes
made by the following patches which I plan to queue-up for v3.10 shortly.

1. ARM: shmobile: marzen: Add GPIO LEDs
2. gpio: Renesas R-Car GPIO driver V3

The patches in this series are:

Simon Horman (2):
  ARM: shmobile: marzen: defconfig: add GPIO RCAR driver support
  ARM: shmobile: marzen: defconfig: enable GPIO LEDs driver

 arch/arm/configs/marzen_defconfig |    4 ++++
 1 file changed, 4 insertions(+)

-- 
1.7.10.4

[PATCH 1/2] ARM: shmobile: marzen: defconfig: add GPIO RCAR driver support

[Simon Horman]

This enables the driver added in "gpio: Renesas R-Car GPIO driver V3"

Cc: Magnus Damm <damm@opensource.se>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/configs/marzen_defconfig |    1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig
index afb17d6..4b183d1 100644
--- a/arch/arm/configs/marzen_defconfig
+++ b/arch/arm/configs/marzen_defconfig
@@ -75,6 +75,7 @@ CONFIG_I2C_RCAR=y
 CONFIG_SPI=y
 CONFIG_SPI_SH_HSPI=y
 CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_RCAR=y
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 CONFIG_RCAR_THERMAL=y
-- 
1.7.10.4

[PATCH 2/2] ARM: shmobile: marzen: defconfig: enable GPIO LEDs driver

[Simon Horman]

This enables the code added to the marzen board in
"ARM: shmobile: marzen: Add GPIO LEDs".

Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/configs/marzen_defconfig |    3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig
index 4b183d1..47e4d27 100644
--- a/arch/arm/configs/marzen_defconfig
+++ b/arch/arm/configs/marzen_defconfig
@@ -89,6 +89,9 @@ CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_STORAGE=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
 CONFIG_UIO=y
 CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_IOMMU_SUPPORT is not set
-- 
1.7.10.4

[PATCH 0/2] ARM: shmobile: marzen: defconfig updates for v3.10

[Laurent Pinchart]

Hi Simon,

Thanks for the patches.

On Wednesday 27 March 2013 12:46:55 Simon Horman wrote:
> Hi,
> 
> the this short series updates the defconfig for marzen for changes
> made by the following patches which I plan to queue-up for v3.10 shortly.
> 
> 1. ARM: shmobile: marzen: Add GPIO LEDs
> 2. gpio: Renesas R-Car GPIO driver V3
> 
> The patches in this series are:
> 
> Simon Horman (2):
>   ARM: shmobile: marzen: defconfig: add GPIO RCAR driver support
>   ARM: shmobile: marzen: defconfig: enable GPIO LEDs driver
> 
>  arch/arm/configs/marzen_defconfig |    4 ++++
>  1 file changed, 4 insertions(+)

For the whole series,

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

-- 
Regards,

Laurent Pinchart

[PATCH 0/2] ARM: shmobile: marzen: defconfig updates for v3.10

[Simon Horman]

On Wed, Mar 27, 2013 at 09:34:50AM +0100, Laurent Pinchart wrote:
> Hi Simon,
> 
> Thanks for the patches.
> 
> On Wednesday 27 March 2013 12:46:55 Simon Horman wrote:
> > Hi,
> > 
> > the this short series updates the defconfig for marzen for changes
> > made by the following patches which I plan to queue-up for v3.10 shortly.
> > 
> > 1. ARM: shmobile: marzen: Add GPIO LEDs
> > 2. gpio: Renesas R-Car GPIO driver V3
> > 
> > The patches in this series are:
> > 
> > Simon Horman (2):
> >   ARM: shmobile: marzen: defconfig: add GPIO RCAR driver support
> >   ARM: shmobile: marzen: defconfig: enable GPIO LEDs driver
> > 
> >  arch/arm/configs/marzen_defconfig |    4 ++++
> >  1 file changed, 4 insertions(+)
> 
> For the whole series,
> 
> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Thanks, I will add them to the defconfig branch with your Ack.